t-cases / rears FS make offers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gn4u2c* · 11-21-2003, 03:22 PM

All kinds of sheet got to go !!! ask I will check

Destructo · 11-21-2003, 08:58 PM

I want a gov-loc out of a 10 bolt rear 8.5" prefer a 3 series carrier. don't know if your willing to break open a rear end to get it out or not. If so I'm interested in it.

LKJR · 11-23-2003, 07:36 AM

need 3/4 T chevy spring plates

alf4444 · 11-23-2003, 05:29 PM

do you have a 350/205 adapter

*gn4u2c* · 11-23-2003, 10:26 PM

yes i have a adaptor make offer ... I know what they go for.
send pic of the parts you need from a 10 bolt I will pull them for you .
Make offer also

Destructo · 11-23-2003, 11:02 PM

I'll have to crack open a front end to take a pic, but I just want the carrier, gears or not gears, doesn't matter. I need to carrier which includes the spider gears and locker. If you still need a picture I have an extra 10 bolt laying around I can open and take a pic. Not sure what it takes to remove it as I have never removed one before.

alf4444 · 11-24-2003, 11:15 AM

PM me the price you would like to get out of the adapter. The prices I've seen them go for fluctuate too far to try and figure out what you are wanting. I had an email offer for one this morning for $250

if i like your price consider it sold you can also email me at awolfe@prolexys.com

*gn4u2c* · 11-26-2003, 10:51 AM

I will sell the carrier (whole center section) for $50.00 $75.00 if I need to ship it.

Destructo · 11-26-2003, 11:22 AM

So will that 75 include the cost of shipping? What kind of gears and is it gov-loc or posi?

*gn4u2c* · 11-26-2003, 01:23 PM

will send pics

11-21-2003, 03:22 PM	#1
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	t-cases / rears FS make offers All kinds of sheet got to go !!! ask I will check

11-23-2003, 07:36 AM	#3
LKJR Registered User Join Date: May 2000 Location: Lubbock, Tx Posts: 85	need 3/4 T chevy spring plates __________________ 1st Gen Blazers Like em big and topless

11-23-2003, 05:29 PM	#4
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	do you have a 350/205 adapter __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

11-24-2003, 11:15 AM	#7
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	PM me the price you would like to get out of the adapter. The prices I've seen them go for fluctuate too far to try and figure out what you are wanting. I had an email offer for one this morning for $250 if i like your price consider it sold you can also email me at awolfe@prolexys.com __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-21-2003, 08:58 PM	#2
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	I want a gov-loc out of a 10 bolt rear 8.5" prefer a 3 series carrier. don't know if your willing to break open a rear end to get it out or not. If so I'm interested in it.

11-23-2003, 10:26 PM	#5
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	yes i have a adaptor make offer ... I know what they go for. send pic of the parts you need from a 10 bolt I will pull them for you . Make offer also

11-23-2003, 11:02 PM	#6
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	I'll have to crack open a front end to take a pic, but I just want the carrier, gears or not gears, doesn't matter. I need to carrier which includes the spider gears and locker. If you still need a picture I have an extra 10 bolt laying around I can open and take a pic. Not sure what it takes to remove it as I have never removed one before.

11-26-2003, 10:51 AM	#8
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	I will sell the carrier (whole center section) for $50.00 $75.00 if I need to ship it.

11-26-2003, 11:22 AM	#9
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	So will that 75 include the cost of shipping? What kind of gears and is it gov-loc or posi?

11-26-2003, 01:23 PM	#10
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	will send pics



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.