4 x 4 axles for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mnick · 11-23-2003, 12:18 PM

I have a set of 4 x 4 axles for sale.
they came from a 73 k5 blazer
the front is a dana 44 with disk brakes and 4.10 gears
the rear is a 12 bolt with 4.10 gears and a posi
both are in working condition the front might need new calipers
I'm asking $300 for both. please reply to the thread.

mutant-jimbo · 11-24-2003, 11:30 PM

wish you were closer, id snatch them up in a heartbeat

Mark540 · 12-03-2003, 05:57 PM

Might be interested, only need the front though so how much lower would you go, or would you seperate?

mnick · 12-04-2003, 09:27 AM

I'd take 250.00 for them.
I'd rather sell them as a pair.
You can call me at 937-623-1769
I could seperate them I guess.
mike

mnick · 12-04-2003, 06:29 PM

I also have a three speed trans and transfer case
from the same 73 blazer for sale.
the transfer case is a part time unit
$75 for both. I'd prefer not to try and ship them

Mark540 · 12-04-2003, 06:37 PM

OK how much for just the front axle, I can pick it up in Xenia.

mnick · 12-04-2003, 07:11 PM

$125 for the front axle

Mark540 · 12-04-2003, 07:24 PM

Thanks, I really want to find one in $75 range as I am going to strip it for the brake parts only.

dalejr8 · 12-15-2003, 02:18 AM

I have 2 sets of complete axles front and rears. $50.00 a piece (no shipping)

Mark540 · 12-15-2003, 06:16 PM

Dalejr, do these need rebuilt? what year are they?

dalejr8 · 12-15-2003, 09:59 PM

MARK540 AS FAR AS I KNOW THEY DO NOT NEED TO BE REBUILT THEY WORKED FINE WHEN I PARTED OUT THE TRUCKS ONE SET IS A 79 AND ONE IS A 82

mnick · 12-16-2003, 09:46 AM

OK I need these axles gone!
I'll take $250 for everything.
axles, trans, and transfer case.
maybe willing to trade for some good tires (33x12.5x16.5)

76vandura · 12-16-2003, 06:58 PM

I'd love to pick up that dana 44. I am in Ohio. Would it take any modifications to put it on my 82? I am in the process of taking out the front end to put on a lift. Now would be the time to switch axles. I have already changed the rear over the weekend to a 14 bolt 8 lug rear end. Thanks

mnick · 12-17-2003, 09:39 AM

my axles are 6 lug I dont know if that matters to you.
From what I can tell the front should bolt in as well as the rear.
check out my other thread called "axle fitment"
thanks, mike

Mark540 · 12-18-2003, 11:21 PM

Could you check the spring pad width on the back axle, I might do a total change out if you still have them available.

THanks Mark

mnick · 12-19-2003, 09:23 AM

I'll check it out tonight.
give me a call if you want info quicker
937-623-1769

76vandura · 12-20-2003, 05:53 PM

I just converted to 8 lug, so I can't use the 6 lug. I really wanted a dana for my front end

Thanks anyway...

mnick · 12-21-2003, 10:48 PM

the rear axle is 42.5" from spring center to center

chevy68388 · 12-24-2003, 01:29 AM

hey mnick did u ever get that 68 going i just wondered what it looks like now

mnick · 12-24-2003, 05:21 PM

I sold off some of the parts, the cab went to the scrap yard it ended up being worse than the one i had.. the only thing I'm using from it are the doors.

chevy68388 · 12-25-2003, 02:33 AM

aww man sorry bout that were te fenders good off it i never realy tore in to it much to see how bad it was

*1FaastC10* · 12-25-2003, 04:18 PM

still got the axles/trans/transfer case? what trans and case is it?

mnick · 12-26-2003, 10:00 PM

yes, I still have all of it the trans is a 3 speed manual and
the transfer case is (a 205 i think) part time and gear drive
unit

mnick · 01-14-2004, 06:49 PM

TTT

*1FaastC10* · 01-14-2004, 07:08 PM

what do you want for just hte case?

11-23-2003, 12:18 PM	#1
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	4 x 4 axles for sale I have a set of 4 x 4 axles for sale. they came from a 73 k5 blazer the front is a dana 44 with disk brakes and 4.10 gears the rear is a 12 bolt with 4.10 gears and a posi both are in working condition the front might need new calipers I'm asking $300 for both. please reply to the thread.

11-24-2003, 11:30 PM	#2
mutant-jimbo Registered User Join Date: Nov 2003 Location: Joplin, Mo. Posts: 166	wish you were closer, id snatch them up in a heartbeat __________________ "Texas is an outrage when your husband is dead, Texas is an outrage when they pick up his head, Texas is the reason why the presidents dead"-bullet by The Misfits

12-03-2003, 05:57 PM	#3
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Might be interested, only need the front though so how much lower would you go, or would you seperate? __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

12-04-2003, 06:37 PM	#6
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	OK how much for just the front axle, I can pick it up in Xenia. __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

12-04-2003, 07:24 PM	#8
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Thanks, I really want to find one in $75 range as I am going to strip it for the brake parts only. __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

12-04-2003, 09:27 AM	#4
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I'd take 250.00 for them. I'd rather sell them as a pair. You can call me at 937-623-1769 I could seperate them I guess. mike

12-04-2003, 06:29 PM	#5
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I also have a three speed trans and transfer case from the same 73 blazer for sale. the transfer case is a part time unit $75 for both. I'd prefer not to try and ship them

12-04-2003, 07:11 PM	#7
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	$125 for the front axle

12-15-2003, 02:18 AM	#9
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	I have 2 sets of complete axles front and rears. $50.00 a piece (no shipping)

12-15-2003, 06:16 PM	#10
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Dalejr, do these need rebuilt? what year are they? __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

12-15-2003, 09:59 PM	#11
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	MARK540 AS FAR AS I KNOW THEY DO NOT NEED TO BE REBUILT THEY WORKED FINE WHEN I PARTED OUT THE TRUCKS ONE SET IS A 79 AND ONE IS A 82

12-16-2003, 09:46 AM	#12
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	OK I need these axles gone! I'll take $250 for everything. axles, trans, and transfer case. maybe willing to trade for some good tires (33x12.5x16.5)

12-16-2003, 06:58 PM	#13
76vandura Registered User Join Date: Sep 2002 Location: Cambridge, OH Posts: 64	I'd love to pick up that dana 44. I am in Ohio. Would it take any modifications to put it on my 82? I am in the process of taking out the front end to put on a lift. Now would be the time to switch axles. I have already changed the rear over the weekend to a 14 bolt 8 lug rear end. Thanks __________________ 76 Gmc Vandura Custom, RIP 82 K30 4x4 6" Lift, Built 350, many mods 84 cutlass 350 chevy out of my vandura

12-17-2003, 09:39 AM	#14
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	my axles are 6 lug I dont know if that matters to you. From what I can tell the front should bolt in as well as the rear. check out my other thread called "axle fitment" thanks, mike

12-18-2003, 11:21 PM	#15
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Could you check the spring pad width on the back axle, I might do a total change out if you still have them available. THanks Mark __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's



Register or Log In To remove these advertisements.

12-19-2003, 09:23 AM	#16
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I'll check it out tonight. give me a call if you want info quicker 937-623-1769

12-20-2003, 05:53 PM	#17
76vandura Registered User Join Date: Sep 2002 Location: Cambridge, OH Posts: 64	I just converted to 8 lug, so I can't use the 6 lug. I really wanted a dana for my front end Thanks anyway... __________________ 76 Gmc Vandura Custom, RIP 82 K30 4x4 6" Lift, Built 350, many mods 84 cutlass 350 chevy out of my vandura

12-21-2003, 10:48 PM	#18
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	the rear axle is 42.5" from spring center to center

12-24-2003, 01:29 AM	#19
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	hey mnick did u ever get that 68 going i just wondered what it looks like now __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

12-24-2003, 05:21 PM	#20
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I sold off some of the parts, the cab went to the scrap yard it ended up being worse than the one i had.. the only thing I'm using from it are the doors.

12-25-2003, 02:33 AM	#21
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	aww man sorry bout that were te fenders good off it i never realy tore in to it much to see how bad it was __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

12-25-2003, 04:18 PM	#22
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	still got the axles/trans/transfer case? what trans and case is it?

12-26-2003, 10:00 PM	#23
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	yes, I still have all of it the trans is a 3 speed manual and the transfer case is (a 205 i think) part time and gear drive unit

01-14-2004, 06:49 PM	#24
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	TTT

01-14-2004, 07:08 PM	#25
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	what do you want for just hte case?

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode