Leaf spring bolt welded on? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C101971 · 01-20-2019, 06:06 PM

Now I'm no stranger to leaf springs, they suck to work with. I had to cut a bolt out of one of the brackets, naturally it had to be the front one, the worst one to deal with. I cut right in between the bushing and the bracket so the leafs just dropped out. Got the head of the bolt out with a mini sledge, penetration grease and a punch. The side with the nut on it however. Is a ****nami tidal wave of disaster. I can not for the life of me get it off. I don't have a air hammer so I'm working in the Stone age. I've used half a can of penetration grease, half a propane torch, and all the elbow grease my body can pump out and I can't get this thing out.

Any tips on how I might go about getting this out?

rockyrivermark · 01-20-2019, 06:33 PM

I would try more heat. Mapp gas (accedeline) is hotter than propane.
Or even better accedline and oxygen. I'm sure you know but if not heat the portion that the bolt goes into to expand that.

bill3rail · 01-20-2019, 06:51 PM

Just a little heat is not enough, heat it until it is red hot all the way through!
Then hammer the crap out of it.

rockyrivermark · 01-20-2019, 07:33 PM

Quote:

Originally Posted by bill3rail

Just a little heat is not enough, heat it until it is red hot all the way through!
Then hammer the crap out of it.

Yeah do that.

KQQL IT · 01-20-2019, 10:05 PM

Press the whole bushing out

01-20-2019, 06:06 PM	#1
C101971 Registered User Join Date: Jul 2018 Location: Calgary Posts: 53	Leaf spring bolt welded on? Now I'm no stranger to leaf springs, they suck to work with. I had to cut a bolt out of one of the brackets, naturally it had to be the front one, the worst one to deal with. I cut right in between the bushing and the bracket so the leafs just dropped out. Got the head of the bolt out with a mini sledge, penetration grease and a punch. The side with the nut on it however. Is a ****nami tidal wave of disaster. I can not for the life of me get it off. I don't have a air hammer so I'm working in the Stone age. I've used half a can of penetration grease, half a propane torch, and all the elbow grease my body can pump out and I can't get this thing out. Any tips on how I might go about getting this out?

01-20-2019, 06:33 PM	#2
rockyrivermark Registered User Join Date: Apr 2011 Location: Fairview Park, Ohio Posts: 1,031	Re: Leaf spring bolt welded on? I would try more heat. Mapp gas (accedeline) is hotter than propane. Or even better accedline and oxygen. I'm sure you know but if not heat the portion that the bolt goes into to expand that. __________________ My build page http://67-72chevytrucks.com/vboard/s...d.php?t=764662 My cabinet building site http://www.cbcabinets.com

01-20-2019, 06:51 PM	#3
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: Leaf spring bolt welded on? Just a little heat is not enough, heat it until it is red hot all the way through! Then hammer the crap out of it. __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

01-20-2019, 10:05 PM	#5
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: Leaf spring bolt welded on? Press the whole bushing out __________________ " That didnt make it any newer " " Dont antique the equipment "

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.