![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Aug 2012
Location: Midland,Tx
Posts: 103
|
70 c10 L6 w/4 speed to sbc help
I took out the l6 and installed the 350 with big block clamshell style mounts in the forward holes my issue is the trans sits too far forward to bolt up to the belhousing crossmember.
Will the holes align if I move the towers to the rear holes? Don't want to have to replace driveshaft and crossmember at the moment since I will be changing trans in the near future when funds become available. Any help is appreciated
__________________
72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD Last edited by 454C10CHEVY; 03-12-2019 at 02:31 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2012
Location: Midland,Tx
Posts: 103
|
Re: 70 c10 L6 w/4 speed to sbc help
Anyone have this issue?
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|