NE 72 GMC Stepside Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ne72gmc · 05-16-2019, 03:19 PM

Mostly everything sold, have a number of small parts, hardware and a few other parts.

PARTING OUT, so the truck is not for sale.

I began my project 2 years ago on the 72 GMC Stepside and made decent progress, but have got to the point that I don't have the time or funds to get it done. Selling this as a complete setup, and here is a summary of where it is:

In-line L6 250 Engine rebuilt professionally and painted
3-speed (on the tree) tranny rebuilt and painted
Frame blasted and painted with KBS
Rear-end blasted and painted (currenty apart) and have a rebuild kit
Many new parts purchased (stainless brake lines, rear drum parts, new springs and shocks, new suspension bushings, etc
Intake/Exhaust manifolds were blasted and painted
1BBL carb cleaned and rebuilt
Distributor cleaned and rebuilt (new cap, rotor, wires and plugs)
New fuel pump
New water pump
All bolts are in bags labeled
I have pictures of about everything as I took it apart (and put it back together)

Asking $5000 for everything, which seems like a bargain. Hopefully the pictures will help you show the attention to detail I was taking on every part (probably too much at times).

ne72gmc · 05-21-2019, 01:46 PM

ttt

72GreenMonster · 07-10-2019, 02:07 PM

Still for sale?

ne72gmc · 07-10-2019, 02:49 PM

Sorry, I decided to part it out, but the bulk of it is gone, I have the following left: 3-speed tranny, windows, wing windows, full set of new stainless steel brake lines and cables, steering column, some other new joint components, really nice steering wheel and other misc parts.

If you are interested in any of that, let me know.

Dirt's72 · 07-10-2019, 07:42 PM

What color is the steering wheel? I saw your motor sale post for sale a while back and boy someone got a deal on that.

ne72gmc · 07-10-2019, 07:58 PM

The steering wheel is black. Yea, I lost a little on that deal...

**Harleys 4 You** · 07-23-2019, 10:54 PM

How much for all the parts?

ne72gmc · 07-29-2019, 08:31 AM

Sorry for the delay, below is what I have left, asking $1000 for everything.

3-speed tranny
stainless steel brake lines and rear brake cables
3-speed steering column
New Ball joints, u-joints, stainless steel brake lines and rear cables, rear drum rebuild parts and a few other misc parts
Drive shaft swb 2wd
Other misc parts

05-16-2019, 03:19 PM	#1
ne72gmc Registered User Join Date: Jan 2018 Location: Omaha, NE Posts: 89	72 GMC Stepside Project Mostly everything sold, have a number of small parts, hardware and a few other parts. PARTING OUT, so the truck is not for sale. I began my project 2 years ago on the 72 GMC Stepside and made decent progress, but have got to the point that I don't have the time or funds to get it done. Selling this as a complete setup, and here is a summary of where it is: In-line L6 250 Engine rebuilt professionally and painted 3-speed (on the tree) tranny rebuilt and painted Frame blasted and painted with KBS Rear-end blasted and painted (currenty apart) and have a rebuild kit Many new parts purchased (stainless brake lines, rear drum parts, new springs and shocks, new suspension bushings, etc Intake/Exhaust manifolds were blasted and painted 1BBL carb cleaned and rebuilt Distributor cleaned and rebuilt (new cap, rotor, wires and plugs) New fuel pump New water pump All bolts are in bags labeled I have pictures of about everything as I took it apart (and put it back together) Asking $5000 for everything, which seems like a bargain. Hopefully the pictures will help you show the attention to detail I was taking on every part (probably too much at times). Attached Images __________________ Bruce 70 Chevy C10 SWB Stepside Last edited by ne72gmc; 09-23-2019 at 12:50 PM. Reason: update on status

05-21-2019, 01:46 PM	#2
ne72gmc Registered User Join Date: Jan 2018 Location: Omaha, NE Posts: 89	Re: 72 GMC Stepside Project ttt __________________ Bruce 70 Chevy C10 SWB Stepside

07-10-2019, 02:07 PM	#3
72GreenMonster Registered User Join Date: Dec 2018 Location: Los Angeles Posts: 53	Re: 72 GMC Stepside Project Still for sale? __________________ 72 GMC Sierra 2500

07-10-2019, 02:49 PM	#4
ne72gmc Registered User Join Date: Jan 2018 Location: Omaha, NE Posts: 89	Re: 72 GMC Stepside Project Sorry, I decided to part it out, but the bulk of it is gone, I have the following left: 3-speed tranny, windows, wing windows, full set of new stainless steel brake lines and cables, steering column, some other new joint components, really nice steering wheel and other misc parts. If you are interested in any of that, let me know. __________________ Bruce 70 Chevy C10 SWB Stepside

07-10-2019, 07:42 PM	#5
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: 72 GMC Stepside Project What color is the steering wheel? I saw your motor sale post for sale a while back and boy someone got a deal on that.

07-10-2019, 07:58 PM	#6
ne72gmc Registered User Join Date: Jan 2018 Location: Omaha, NE Posts: 89	Re: 72 GMC Stepside Project The steering wheel is black. Yea, I lost a little on that deal... __________________ Bruce 70 Chevy C10 SWB Stepside

07-23-2019, 10:54 PM	#7
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 523	Re: 72 GMC Stepside Project How much for all the parts?

07-29-2019, 08:31 AM	#8
ne72gmc Registered User Join Date: Jan 2018 Location: Omaha, NE Posts: 89	Re: 72 GMC Stepside Project Sorry for the delay, below is what I have left, asking $1000 for everything. 3-speed tranny stainless steel brake lines and rear brake cables 3-speed steering column New Ball joints, u-joints, stainless steel brake lines and rear cables, rear drum rebuild parts and a few other misc parts Drive shaft swb 2wd Other misc parts __________________ Bruce 70 Chevy C10 SWB Stepside

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.