OR 1972 suburban parts and cuts

[bcfishon]

I've never posted to sell parts and did not plan to but this suburban fell into my possession and I have no use for it but could not pass it up. I will cut up what someone wants and have some various pieces but not too much. Have never shipped before but willing to learn a new trick so if you see something you need holler and I will shoot numbers and will ship with your assistance. po cut off roof and wacked the pillars.and firewall.

[randy500]

Price on the rh B pillar? Picked up

[bcfishon]

Originally Posted by randy500

Price on the rh B pillar? Picked up

How about $40

[randy500]

Originally Posted by bcfishon

How about $40

I will take it.
Traveling down your way next week probably.

[71blksuper4x4]

How rusty is the cab mounts that connect to the b pillars?

[bcfishon]

Originally Posted by 71blksuper4x4

How rusty is the cab mounts that connect to the b pillars?

I'll look closer for you

[bcfishon]

Originally Posted by 71blksuper4x4

How rusty is the cab mounts that connect to the b pillars?

The can mounts look good and I think I can get them out when working on other folks stuff,I really like the $ 40 dollar price.
I am willing to ship with assistance.

[bcfishon]

Originally Posted by randy500

I will take it.
Traveling down your way next week probably.

Pm sent

[Disastro]

What's the condition of the rear sill? (Panel that the tailgate bolts to.)

[71blksuper4x4]

Is there a window left in the fake door? Is it a green tinted one?

[bcfishon]

Originally Posted by 71blksuper4x4

Is there a window left in the fake door? Is it a green tinted one?

Yes

[randy500]

I need the “B” pillar cut at the roof rail and down through the front and rear rockers, if you can save the floor support for Trevor thats fine. I think it connects behind the pillar.

[ShortbedClayton]

Also interested in the false door window regulaor
Posted via Mobile Device

[bcfishon]

Originally Posted by ShortbedClayton

Also interested in the false door window regulaor
Posted via Mobile Device

I will look at it,could not get that window to roll either way but it may just need a little spray and motion,it's on my list sir

[randy500]

I need the entire B pillar as marked.

[bcfishon]

Originally Posted by randy500

I need the entire B pillar as marked.

Randy,
Here are some pictures of that piece ,take a gander and if you want it it's yours

[randy500]

Originally Posted by bcfishon

Randy,
Here are some pictures of that piece ,take a gander and if you want it it's yours

Its useable for my purpose, cut the rear rocker panel like the front one and then the floor. Which is through that floor support, unless you want to dissect the bottom So Trevor can get the floor support (best idea)
Just cut the top at each side of the top rail so clayton can get his top rail piece.

[bcfishon]

Originally Posted by randy500

Its useable for my purpose, cut the rear rocker panel like the front one and then the floor. Which is through that floor support, unless you want to dissect the bottom So Trevor can get the floor support (best idea)
Just cut the top at each side of the top rail so clayton can get his top rail piece.

I actually understood that and it's in my skill range,your name is on it

[randy500]

The 6. Bolts loosen up things on the floor support but its also spot welded, prob can separate it with an air chisel.

[ShortbedClayton]

I’ll take as much as I can between the b pillar and third door back. That looks to be nicest.. if I get most of that without messing with Randy’s cut and the best part of drivers side in front of solid side should be more than enough... like I said roughly 26” between the two should be great! thanks for the pics. Let me know a price and when you get it cut. Shipping shouldn’t be terrible. I’ve learned the smaller the box the cheaper the shipping for UPS. Probably just wrap the pieces in cardboard and have both ends shut and that would probably work..

Thanks
Clayton
Posted via Mobile Device

[Heliarcn]

How bout the 3 headliner bows and chrome clips? Can you send good pics and tell me how much shipped to 89149?

Thanks.

[bcfishon]

Originally Posted by Heliarcn

How bout the 3 headliner bows and chrome clips? Can you send good pics and tell me how much shipped to 89149?

Thanks.

Only one bow was intact,chrome clips were still there,
$15 bucks plus shipping

[Heliarcn]

Originally Posted by bcfishon

Only one bow was intact,chrome clips were still there,
$15 bucks plus shipping

Looks like the bow is a little rough. Ill take the clips. Let me know how to pay.

Thanks

[bcfishon]

Originally Posted by Heliarcn

Looks like the bow is a little rough. Ill take the clips. Let me know how to pay.

Thanks

Pm sent

[ShortbedClayton]

Did you think of a price on them cuts I asked about..
Posted via Mobile Device