|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
04-13-2020, 09:15 AM
|
#1 |
|
Registered User
Join Date: Jun 2016
Location: West Palm Beach, Florida
Posts: 295
|
Sway Bar / Lower Control Arm Compatibility
My truck came with the DJM Lower Control arm below and no Sway Bar. I would like to install the Sway Bar below but I am not sure they will be compatible.
Can anyone tell me if they will work together. https://www.summitracing.com/parts/d...placementparts https://www.ebay.com/itm/63-72-CHEVY...UAAOSw5dlaLx8o |
|
|
|
04-13-2020, 10:09 AM
|
#2 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,031
|
Re: Sway Bar / Lower Control Arm Compatibility
The end-link bushing set-up you linked is the same style that those DJM a-arms utilize but that doesn't mean their compatibility is a sure thing. I have 2 sway bars w/end links like that. Each bar is a slightly different width which would cause possible alignment issues if not used on a-arms w/the mount aligned.
If you cannot fabricate, I would verify what swap bar DJM recommends first. I you can fabricate, then @ worst you might need to relocated the a-arm mount placement on the a-arm so the link is plumb/vertical @ ride height.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
