|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
12-10-2003, 02:24 AM
|
#1 |
|
Junior Member
 
Join Date: Dec 2003
Location: Great Salt Lake Area
Posts: 78
|
longer wheel studs for 72K5
I bought eagle 589 rims for my 72K5 and the wheels studs arent long enough. Any longer studs available?
|
|
|
|
12-10-2003, 03:11 PM
|
#2 |
|
Registered User
Join Date: Oct 2003
Location: sf bay area
Posts: 3
|
i have the same rims on my '72 (15x12) and they went after gringing away some of the caliper. they did not fully seat because of the clearence issue. i found where the contact was and grinded a little off each corner of the caliper. if i could do it over i would of went with a larger rim diameter. if you want longer studs, you can usually get them at a regular parts store. if not, try a wheel specialist like wheel works or americas tire. first you should make sure that there is no contact with the disc break components and the rim. i hope this helps.
__________________
72 k5 6" suspension 2" body 16x35x15 BOGGERS |
|
|
|
|
12-11-2003, 06:56 PM
|
#3 |
|
Chevelle Nutt
Join Date: Nov 2002
Location: Fredericksburg, Va.
Posts: 204
|
You should be able to get some from your local speed shop. I know Moroso makes them and I think ARP makes them too.
Doug
__________________
71 CST Blazer 4X4, 350, on da tree  81 Blazer 2wd 350 350 99 F*** Ranger, I know, I know but it's cheap transportation  83 Mustang GT 5.0 4 speed loaded "got cubic inch?"
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
