![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Feb 2005
Location: Indiana
Posts: 163
|
ANybody running WILWOOD #140-10094 complete rear disc kit ?
trying to determine which wilwood braided hoses to use ?
|
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: ANybody running WILWOOD #140-10094 complete rear disc kit ?
I am give me a few mins and i will look up the hoses i used, I know i went with a 12 inch line after i ran new brake lines to give me a little extra play when removing the calipers for pad replacements
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: ANybody running WILWOOD #140-10094 complete rear disc kit ?
wildwood 220-7686 from summit and actually i forgot they are 16inches
I also had to order some weld on tabs and clips to hold the adapter fittings to the steel lines, I just tached them to the axle tubes. i do not know if you need them or not
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: ANybody running WILWOOD #140-10094 complete rear disc kit ?
do you have the flare adapter for the hard lines?
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2005
Location: Indiana
Posts: 163
|
Re: ANybody running WILWOOD #140-10094 complete rear disc kit ?
|
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: ANybody running WILWOOD #140-10094 complete rear disc kit ?
Hope this helps,. if you can not tach weld the brake line tab on to the axle tube. you might find one that you can clamp on with a big hose clamp.
but the weld on one is the best so everything is stable on the road and will not loosen up or crack a line from stress or movement and just an FYI i have not gotten mine on the road yet as i redoing all lines and my cab is stripped for body work
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: ANybody running WILWOOD #140-10094 complete rear disc kit ?
the rear brake lines I got from Napa and they are the coated ones I just bent them the best i could along the tubes. I ordered whole set from inline tube but they did not really match up ( will use what i can) , so i got the generic ones from Napa in the length i needed
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: ANybody running WILWOOD #140-10094 complete rear disc kit ?
if you are trying to go straight to the rear stock brake lines, They might be too long
mine were rotted so i just replaced , i don't know if you can hook straight to the stock lines depending on the condition and length
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: ANybody running WILWOOD #140-10094 complete rear disc kit ?
Just following up any luck with your swap
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|