![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: May 2003
Location: DFW
Posts: 127
|
6 lug to 5 lug rear end ?
I have a '71 5 lug open rear end and a '69 6 lug posi rear end. I am wanting to stay with the 5 lug can I just swap the axles from my '71 to the '69 or will it be easier to swap the posi and gears from th '69 to the '71 rear? If I swap the complete posi and gears will I need to reset up the gears?
|
![]() |
![]() |
![]() |
#2 |
Truck Farmer
Join Date: Nov 2001
Location: Lake Havasu City, Arizona
Posts: 1,192
|
I have asked this same question and was told the axles are different length. I don't know for sure as I never tried.
__________________
Arizona rust free sheetmetal |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Dec 1999
Location: Knightstown, in, usa
Posts: 2,525
|
The axle lengths ARE different, and, yes if you swap the posi to the newer housing, the rear end will have to be "set up". You do have a few other options, though. You could have a machine shop re-drill the 6 lug flanges to 5 lug, or, buy replacement axles from an aftermarket producer. As hard as it is to find 12 bolt posi units, I wish I had your problem. Good luck.
__________________
1970 long fleet, 355 4 speed, primer, walnut goodies |
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
Lately it almost seems easier to find nice wheels for six lug axles.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|