![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2001
Location: springfield ill
Posts: 836
|
steering bearing
how do you remove the top bearing of a steering column.i have the wheel off and have un-screwed the 3 bolts on the turn signal plastic thing,but it wont come off i dont want to break the hazard button,so i figured someone will know.also is the bearing a specialty bearing or can i buy it at any bearing shop?
__________________
springfield illinois 2003 custom (harley)built from scratch 68 swb |
![]() |
![]() |
![]() |
#2 |
Inline 69
Join Date: Apr 2003
Location: valleysprings,california
Posts: 1,018
|
to remove the plastic turn signal assembly ,you have to "push" the flasherbutton "in" ,then un-screw the button to get it out of the column ,,,,jeff
|
![]() |
![]() |
![]() |
#3 |
Inline 69
Join Date: Apr 2003
Location: valleysprings,california
Posts: 1,018
|
steering assembly pic
theres 2 bearings,upper and lower,the upperbearing (#34) should come out with a little prying (per service manual),if your also gonna do the lower bearing(#18)i believe you have to dis-assemble the intermediate shaft and joint assembly,,,,heres a diagrahm,,,,jeff (i dont know if its a "common" bearing)
|
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Jul 2003
Posts: 1,284
|
if you need I have them in stock
Shawn |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|