Help with the size of hubcap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C4UC101969 · 07-23-2020, 09:02 PM

Guys need y'all input, I am wondering what is the back size of the dog dish hubcaps in the picture and where is a good and reliable place to get them from. Thank you for any help.

**special-K** · 07-24-2020, 06:22 AM

I never needed to measure a hubcap. Same size as 1/2t trucks is all I know. Other than Corvair and other smaller car wheels like early ChevyII, you have the car/half ton truck size and you have the 8-lug size, bigger obviously and obviously bigger. My first '72 I bought in '73 I put those same hubcaps on 8"/10" steel wheels. I've read that the car/half ton caps are 10 1/4" I think it was. They will fit any 5 or 6-lug GM truck with nub style wheels.

Here are '54s mounted on the rollers under my '67 project. I beleve they were the first nub-type Chevy caps

flashed · 07-24-2020, 07:11 PM

Those look like 55 Chevy Dog Dish caps , maybe look on a Tri Five site .

bry593 · 07-24-2020, 09:14 PM

10-1/8 is Ford and Chevy small cap (1/2 ton and car)
11-7/8 is Ford and Chevy big cap (3/4 and 1 ton)

Basically, Ford and Chevy interchange. Dodge cars had a smaller cap. Not sure about the Mopar trucks.

07-23-2020, 09:02 PM	#1
C4UC101969 Registered User Join Date: Aug 2018 Location: BARRIE, Ontario Posts: 118	Help with the size of hubcap Guys need y'all input, I am wondering what is the back size of the dog dish hubcaps in the picture and where is a good and reliable place to get them from. Thank you for any help. Attached Images __________________ 1969 'Matte Blackie' Oshawa Built Chevy C10 Stepside 307 three-on-the-tree

07-24-2020, 06:22 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Help with the size of hubcap I never needed to measure a hubcap. Same size as 1/2t trucks is all I know. Other than Corvair and other smaller car wheels like early ChevyII, you have the car/half ton truck size and you have the 8-lug size, bigger obviously and obviously bigger. My first '72 I bought in '73 I put those same hubcaps on 8"/10" steel wheels. I've read that the car/half ton caps are 10 1/4" I think it was. They will fit any 5 or 6-lug GM truck with nub style wheels. Here are '54s mounted on the rollers under my '67 project. I beleve they were the first nub-type Chevy caps Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-24-2020, 07:11 PM	#3
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Help with the size of hubcap Those look like 55 Chevy Dog Dish caps , maybe look on a Tri Five site .

07-24-2020, 09:14 PM	#4
bry593 Registered User Join Date: May 2016 Location: Oklahoma Posts: 201	Re: Help with the size of hubcap 10-1/8 is Ford and Chevy small cap (1/2 ton and car) 11-7/8 is Ford and Chevy big cap (3/4 and 1 ton) Basically, Ford and Chevy interchange. Dodge cars had a smaller cap. Not sure about the Mopar trucks. __________________ 1971 C20 Custom Deluxe, HT383, 4L80E, 3.73 Locker, 4 Wheel Discs

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.