Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
12-15-2003, 04:17 AM | #1 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
Huck, a solution for you
Huck, i was looking on paces site. heres a speedo conversion that will for you or anyone else for the matter. It takes a electronic signal from your tranny and then runs a speedo cable that will work in our trucks.
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
12-15-2003, 04:18 AM | #2 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
Forgot the link.... here t is http://www.paceparts.com/product.asp?3=166918
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
12-15-2003, 05:21 AM | #3 |
Registered User
Join Date: Mar 2000
Location: Mason MI, 48854 (strikezone of the mitten)
Posts: 894
|
I know that the 700r4 trans was made with both mechanical and electronic speedos, so the parts are available for the conversion for the automatic. I have also replaced the speedo gear with a shudder wheel in a np205 tcase swap I did. The inside splines are exactly the same, so it was a dirrect swap. My point is, see if the trans you are running was produced prior to the electronic speedo ('87 and down I think). Even if not, the sensor ring will probably be a dirrect swap with a speedo pickup gear. Then you would need to modify the tailhousing (if it has one) to accept the speedo cable. It helps if you know a machinist for this. It may be cheaper than $280
__________________
1957 Cameo |
12-15-2003, 05:53 AM | #4 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
huck is using a nv4500. they dont any provisions for a mechanical hookup. He hasnt been able to find out how to get his speedo to work yet.
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
12-15-2003, 08:03 AM | #5 |
Registered User
Join Date: Mar 2000
Location: Mason MI, 48854 (strikezone of the mitten)
Posts: 894
|
This site shows what I mean
www.autotransinc.com/ 4l80hous.htm
__________________
1957 Cameo |
12-15-2003, 08:04 AM | #6 |
Registered User
Join Date: Mar 2000
Location: Mason MI, 48854 (strikezone of the mitten)
Posts: 894
|
__________________
1957 Cameo |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|