Wiper question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Asshat · 12-06-2020, 06:02 PM

Are these wipers mis-matched? Only one has the rotation adjuster.

**PGSigns** · 12-06-2020, 09:26 PM

One original and one replacement arm. Do the jeep wiper are swap. It really works good.
Jimmy

Asshat · 12-06-2020, 10:56 PM

Quote:

Originally Posted by PGSigns

One original and one replacement arm. Do the jeep wiper are swap. It really works good.
Jimmy

But does it look good?

**cwcarpenter98** · 12-06-2020, 11:11 PM

Here's how my Jeep wiper arms look.

My opinion with them is this: If you have chrome windshield trim, go with chrome wiper arms. If you have the standard gasket, go with the Jeep arms, if you care more about having functional wipers you can rely on and easily source when you need new blades, go with the Jeep arms. I removed the aftermarket "stock" arms that didn't work well above 60 ish mph to go with the Jeep arms. No issues now with wiping away water when I'm on the interstate going around 70 ish

Asshat · 12-07-2020, 12:36 AM

Quote:

Originally Posted by cwcarpenter98

Here's how my Jeep wiper arms look.

My opinion with them is this: If you have chrome windshield trim, go with chrome wiper arms. If you have the standard gasket, go with the Jeep arms, if you care more about having functional wipers you can rely on and easily source when you need new blades, go with the Jeep arms. I removed the aftermarket "stock" arms that didn't work well above 60 ish mph to go with the Jeep arms. No issues now with wiping away water when I'm on the interstate going around 70 ish

What year Jeep arms? Do they come in silver too?

Katrina/10 · 12-07-2020, 09:22 AM

Quote:

Originally Posted by Asshat

What year Jeep arms? Do they come in silver too?

I would like to know also.

bigmoe · 12-07-2020, 11:10 AM

https://67-72chevytrucks.com/vboard/...ht=jeep+wipers

Here's a good thread. You could paint the arms silver.

gulfcoast66 · 12-07-2020, 12:57 AM

Just Swapped mine... Much more pressure applied to the Windshield when Driving in Rain...

**The Rocknrod** · 12-07-2020, 08:48 AM

Wiper arms are 10.95 each at LMC - https://www.lmctruck.com/1960-66-che...per-and-washer
Truck Shop in Orange has similar prices.

**cwcarpenter98** · 12-07-2020, 07:38 PM

The thread linked by bigmoe is the one I used when I did mine. 87-96 XJ Cherokees are the Jeeps of choice. 97 and up Cherokees have a larger diameter post. You need to purchase 2 rear arms, but you only need to do the flip on one of those. None of the Cherokees had chrome wiper arms, so if you want that look, you'll have to either get them chromed or paint them to look that way

Asshat · 01-19-2021, 10:57 PM

I have been looking for the steel wiper arms and blades, and I think I found something I will be happy with; better than what I found at the Truck Shop. The wiper blade from the Truck Shop was too shiny, I wanted something that has that dull steel look, ike a satin finish.

The wiper arm is an ANCO 41-02; it is n adjustable length arm. The wiper blade is a TRICO 33-130 ( I picked this up on Amazon).

Not sure if this is inof that has already been posted, just thought I would share.

61_FL_Apache · 01-22-2021, 10:54 AM

I had chrome aftermarket arms on mine and no adjustments.

Asshat · 01-22-2021, 11:47 AM

Quote:

Originally Posted by 61_FL_Apache

I had chrome aftermarket arms on mine and no adjustments.

Is there a left and right arm for these trucks?

REDROCKER652002 · 01-22-2021, 12:01 PM

My son bought replacement arms from either Brothers or his work. The passenger side does not seat well and does not wipe the window all the way. He has not taken the truck on the freeway that I am aware of, so I am not sure how that works. So, Jeep wipers are good? I will tell him, he will probably roll his eyes and tell me to shut up. LOL.

Asshat · 10-25-2021, 03:36 PM

I still have to figure out which Jeep wiper arms to get. Is it the Jeep Cherokee? 1980’s?

**cwcarpenter98** · 10-25-2021, 10:23 PM

Quote:

Originally Posted by Asshat

I still have to figure out which Jeep wiper arms to get. Is it the Jeep Cherokee? 1980’s?

It's the XJ Cherokee. Not Grand Cherokee. 87- 96 is the year range. In 97, the rear wiper arm mount became larger with a different shape arm.
If you find the arms from a junkyard, make sure there's no corrosion around the tension spring mount next to the splined part of the arm. I had one from a junkyard like that, and it ended up breaking off on me during a rare, GA snow. I didn't have time to go to the junkyard to find another, so I ordered a new arm from RockAuto. It was the passenger side arm which is not the one that needs to be flipped, thankfully

Asshat · 10-25-2021, 10:41 PM

Quote:

Originally Posted by cwcarpenter98

It's the XJ Cherokee. Not Grand Cherokee. 87- 96 is the year range. In 97, the rear wiper arm mount became larger with a different shape arm.
If you find the arms from a junkyard, make sure there's no corrosion around the tension spring mount next to the splined part of the arm. I had one from a junkyard like that, and it ended up breaking off on me during a rare, GA snow. I didn't have time to go to the junkyard to find another, so I ordered a new arm from RockAuto. It was the passenger side arm which is not the one that needs to be flipped, thankfully

What is the part number for the 14” wiper blade? All I could find is 13”.

**cwcarpenter98** · 10-25-2021, 10:44 PM

Quote:

Originally Posted by Asshat

What is the part number for the 14” wiper blade? All I could find is 13”.

I used a Trico 14" blade that wasn't specific to any make or model. It was in the red Trico package. There's not really a specific part number to the blade itself. The main thing is making sure you get a blade with the correct mounting point for the arms.

Asshat · 10-25-2021, 10:54 PM

Quote:

Originally Posted by cwcarpenter98

I used a Trico 14" blade that wasn't specific to any make or model. It was in the red Trico package. There's not really a specific part number to the blade itself. The main thing is making sure you get a blade with the correct mounting point for the arms.

Thank you!

Is that called a pin-type mount?

12-06-2020, 06:02 PM	#1
Asshat Registered User Join Date: Jul 2015 Location: South Orange County CA Posts: 1,265	Wiper question Are these wipers mis-matched? Only one has the rotation adjuster. Attached Images __________________ 1963 C20, small window, long bed 292, 4-speed

12-06-2020, 09:26 PM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Wiper question One original and one replacement arm. Do the jeep wiper are swap. It really works good. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

12-06-2020, 11:11 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: Wiper question Here's how my Jeep wiper arms look. My opinion with them is this: If you have chrome windshield trim, go with chrome wiper arms. If you have the standard gasket, go with the Jeep arms, if you care more about having functional wipers you can rely on and easily source when you need new blades, go with the Jeep arms. I removed the aftermarket "stock" arms that didn't work well above 60 ish mph to go with the Jeep arms. No issues now with wiping away water when I'm on the interstate going around 70 ish Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

12-07-2020, 11:10 AM	#7
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: Wiper question https://67-72chevytrucks.com/vboard/...ht=jeep+wipers Here's a good thread. You could paint the arms silver.

12-07-2020, 12:57 AM	#8
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Wiper question Just Swapped mine... Much more pressure applied to the Windshield when Driving in Rain... Attached Images __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

12-07-2020, 08:48 AM	#9
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Wiper question Wiper arms are 10.95 each at LMC - https://www.lmctruck.com/1960-66-che...per-and-washer Truck Shop in Orange has similar prices. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-07-2020, 07:38 PM	#10
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: Wiper question The thread linked by bigmoe is the one I used when I did mine. 87-96 XJ Cherokees are the Jeeps of choice. 97 and up Cherokees have a larger diameter post. You need to purchase 2 rear arms, but you only need to do the flip on one of those. None of the Cherokees had chrome wiper arms, so if you want that look, you'll have to either get them chromed or paint them to look that way __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

01-19-2021, 10:57 PM	#11
Asshat Registered User Join Date: Jul 2015 Location: South Orange County CA Posts: 1,265	Re: Wiper question I have been looking for the steel wiper arms and blades, and I think I found something I will be happy with; better than what I found at the Truck Shop. The wiper blade from the Truck Shop was too shiny, I wanted something that has that dull steel look, ike a satin finish. The wiper arm is an ANCO 41-02; it is n adjustable length arm. The wiper blade is a TRICO 33-130 ( I picked this up on Amazon). Not sure if this is inof that has already been posted, just thought I would share. Attached Images __________________ 1963 C20, small window, long bed 292, 4-speed

01-22-2021, 10:54 AM	#12
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Wiper question I had chrome aftermarket arms on mine and no adjustments. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

01-22-2021, 12:01 PM	#14
REDROCKER652002 Registered User Join Date: Nov 2018 Location: South San Francisco CA, Posts: 441	Re: Wiper question My son bought replacement arms from either Brothers or his work. The passenger side does not seat well and does not wipe the window all the way. He has not taken the truck on the freeway that I am aware of, so I am not sure how that works. So, Jeep wipers are good? I will tell him, he will probably roll his eyes and tell me to shut up. LOL.

10-25-2021, 03:36 PM	#15
Asshat Registered User Join Date: Jul 2015 Location: South Orange County CA Posts: 1,265	Re: Wiper question I still have to figure out which Jeep wiper arms to get. Is it the Jeep Cherokee? 1980’s? __________________ 1963 C20, small window, long bed 292, 4-speed

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.