|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
12-07-2020, 03:21 PM
|
#1 |
|
Senior Member
 
Join Date: Jan 2012
Location: Texan, back in TX
Posts: 2,155
|
Factory Style Lug Nuts
What type of lug nuts were used from the factory on 1971 C/10's with factory steel wheels? Are they something that would be readily available at a parts store or would I need to order online?
I'm using conversion axles on the rear of my 1970 and according to this thread, http://67-72chevytrucks.com/vboard/s...d.php?t=564907, I need to use Dorman wheel studs, part number 610-298.1. Would they be correct to use with factory 5-lug 4-nub steel wheels? |
|
|
|
12-07-2020, 07:16 PM
|
#2 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Factory Style Lug Nuts
I'm pretty sure they are 1/2x20 nuts.
Aimco number 5516 Wheel stud size is 1/2"- 20 Rotor size: Heavy duty type, 1.250" thick 12.00" diameter 5 x 5" bolt pattern Yes they are a standard size that all parts store should have in stock. Even the chrome ones to dress up the wheel a bit.  https://www.performanceonline.com/19...bolt%20pattern
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
