![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jun 2017
Location: Sanford.NC
Posts: 12
|
WTB 67 C10 front fender patch panel
I need a patch panel for the passenger side front fender on my 67 C10 . The front upper corner above the headlight and along the front edge beside the headlight was crushed and had about an inch of bondo in it. I can use a section about 8 inches from the front edge and about 12 inches down from the top edge next to the hood. Or if somebody has a 67 or 68 fender that is damaged on the rear but has a good front section, I could use the front 22 inches . My inner brace is straight and solid.
|
![]() |
![]() |
![]() |
#2 | |
Senior Member
![]() Join Date: Apr 2013
Location: Columbia, MO
Posts: 1,934
|
Re: WTB 67 C10 front fender patch panel
Quote:
__________________
PayPal 1windyridgeboy@gmail.com |
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2017
Location: Sanford.NC
Posts: 12
|
Re: WTB 67 C10 front fender patch panel
Thanks Jay.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2017
Location: Sanford.NC
Posts: 12
|
Re: WTB 67 C10 front fender patch panel
I found one locally. Thanks anyway Jay.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Apr 2013
Location: Columbia, MO
Posts: 1,934
|
Re: WTB 67 C10 front fender patch panel
Thanks for letting me know and I am glad you found one. I looked at the ones I had and they were border line, but still to good to cut up I think. Jay
__________________
PayPal 1windyridgeboy@gmail.com |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|