The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-19-2020, 12:52 PM   #1
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,786
Wiper blades... any good one out there?

The old 71 is ready to push snow again and noticed it needs wiper blades pretty bad. I have put some inserts in them but they don't last too long. Anyone have any good suggestions for a cold weather wiper that will last? Anything later model that will utilize the whole arm and blade?
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is online now   Reply With Quote
Old 12-19-2020, 01:39 PM   #2
HIGHWAY BY THE SEA
Senior Member
 
HIGHWAY BY THE SEA's Avatar
 
Join Date: Nov 2012
Location: BY THE CAROLINA SEA
Posts: 922
Re: Wiper blades... any good one out there?

I just replaced the wiper blades on two of my trucks. I was surprised to find out that NAPA had their own version of the Trico one's. It does not have the arm, but it fits perfectly on our Factory wiper arms. I was quite impressed.
__________________
FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside
GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed
http://67-72chevytrucks.com/vboard/s...d.php?t=584617
PROJECT JIGSAW 1967 GMC C3500
GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion
HIGHWAY BY THE SEA is offline   Reply With Quote
Old 12-19-2020, 06:02 PM   #3
57taskforce
All about them K’s
 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: Land of Entrapment
Posts: 6,487
Re: Wiper blades... any good one out there?

I bought a set of stainless blades that look pretty original but use modern blades from Fred(specialty retail) $28 shipped and they work pretty good. These aren’t refills but rather a whole new blade.

http://67-72chevytrucks.com/vboard/s...d.php?t=811133
Attached Images
  
__________________
Tyler
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

Last edited by 57taskforce; 12-19-2020 at 06:08 PM.
57taskforce is offline   Reply With Quote
Old 12-19-2020, 11:30 PM   #4
Brocoli Wad
Registered User
 
Join Date: Feb 2020
Location: Englewood, Florida
Posts: 42
I just replaced my wipers that were too long with these from Amazon. Very pleased with both the look and performance. They click right on to our arms, easy off and on, yet secure.

Trico 33-150 Classic Wiper Blade 15", Pack of 1
ASIN: B000CPZVTS
Posted via Mobile Device
Brocoli Wad is offline   Reply With Quote
Old 12-20-2020, 08:41 AM   #5
mrein3
Registered User
 
mrein3's Avatar
 
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
Re: Wiper blades... any good one out there?

In the 25 years I've driven my truck in the winter, I've found that most blades are crappy at best. To combat that I like to keep a good coat of RainX on my windshield at all times.

With the RainX coating, the blades do an ok job. Even when the wind blows plow snow back in your face.
__________________
'70 cab, '71 chassis, 383, TH350, NP205.
'71 Malibu convertible
'72 Malibu hard top
Center City, MN
mrein3 is offline   Reply With Quote
Old 12-20-2020, 01:21 PM   #6
Sheepdip
Senior Member
 
Sheepdip's Avatar
 
Join Date: Nov 2018
Location: Waterford California
Posts: 2,626
Re: Wiper blades... any good one out there?

Quote:
Originally Posted by mrein3 View Post
In the 25 years I've driven my truck in the winter, I've found that most blades are crappy at best. To combat that I like to keep a good coat of RainX on my windshield at all times.

With the RainX coating, the blades do an ok job. Even when the wind blows plow snow back in your face.
X2 on the RainX....unless it's raining hard you don't even have to turn the wipers on most of the time.
Sheepdip is online now   Reply With Quote
Old 12-20-2020, 06:20 PM   #7
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,786
Re: Wiper blades... any good one out there?

Quote:
Originally Posted by Sheepdip View Post
X2 on the RainX....unless it's raining hard you don't even have to turn the wipers on most of the time.
Unfortunately this truck doesn't get driven in the rain. Snow, ice or melting heavy snow are what i deal with on this one.
I usually use meguires cleaner wax on glass. It helps.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is online now   Reply With Quote
Old 12-20-2020, 06:47 PM   #8
Hammond68
Registered User
 
Join Date: Mar 2018
Location: Bennettsville sc
Posts: 105
Re: Wiper blades... any good one out there?

RainX creates a haze for a second every time the wiper goes across it. Really sucks at night or any other low visibility situation.
__________________
1972 c10 cheyenne.
383 stroker 10-1
280 magnum comp cams
700r4 tranny.
Hammond68 is offline   Reply With Quote
Old 12-21-2020, 08:23 AM   #9
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,142
Re: Wiper blades... any good one out there?

Trico makes the SS complete wiper blade assembly. You should be able to get them at Orielly's or Napa. Other parts stores might be able to order them as well. I've seen them on Amazon too.

https://www.oreillyauto.com/detail/b.../33150/4749159
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 12-21-2020, 10:52 AM   #10
Myself
Registered User
 
Join Date: Oct 2005
Location: Northern Arkansas
Posts: 1,142
Re: Wiper blades... any good one out there?

Silicone blades, don't get hard in cold temps, last for years. Been using silicone blades for over 10 years.
Myself is offline   Reply With Quote
Old 12-21-2020, 12:05 PM   #11
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,786
Re: Wiper blades... any good one out there?

Quote:
Originally Posted by Dieselwrencher View Post
Trico makes the SS complete wiper blade assembly. You should be able to get them at Orielly's or Napa. Other parts stores might be able to order them as well. I've seen them on Amazon too.

https://www.oreillyauto.com/detail/b.../33150/4749159
Have you or anyone you know used them?

Quote:
Originally Posted by Myself View Post
Silicone blades, don't get hard in cold temps, last for years. Been using silicone blades for over 10 years.
Just from a local parts store?
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is online now   Reply With Quote
Old 12-21-2020, 11:46 PM   #12
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,142
Re: Wiper blades... any good one out there?

Quote:
Originally Posted by too much stuff View Post
Have you or anyone you know used them?


Just from a local parts store?
Ive had the trico ones on my orange truck for 2 years. I drive it in snow, sleet and ice and they have worked better than the junk regular parts store ones I was getting. The blower motor needs another speed though. Haha
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 12-21-2020, 07:14 PM   #13
chewychevy67
Senior Member
 
Join Date: Jan 2010
Location: Here
Posts: 5,551
Re: Wiper blades... any good one out there?

Here are some silicone refills that ight fit I to your original frames if you are still using them. I might go this route. https://www.ebay.com/itm/2Pcs-6MM-Su...IAAOSwbaxbUruS
chewychevy67 is offline   Reply With Quote
Old 12-24-2020, 04:29 PM   #14
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 960
Re: Wiper blades... any good one out there?

I just picked up a set of the truck from Oreillys. They look like a decent set. Of course it hasn’t rained yet for me to test them out. They certainly look better than the plastic garbage.
jessemthompson is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:30 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com