Anyone have their windshield out? Need to verify a dimension - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**A1971Blazer** · 01-14-2022, 04:54 PM

Getting ready to weld in the windshield area.
I need to verify the width of the opening all the way across the very top of the WS frame at the corners.
I want to make sure it matches the jig that I made for the spacing
I had to remove it to put in the inner A pillars
Name: IMG_0874.jpg
Views: 710
Size: 85.4 KB

Name: IMG_0874.jpg
Views: 710
Size: 85.4 KB

**Grumpy old man** · 01-14-2022, 05:23 PM

Straight across inside corner to inside corner is 56 1/2" .

**A1971Blazer** · 01-14-2022, 05:34 PM

Quote:

Originally Posted by Grumpy old man

Straight across inside corner to inside corner is 56 1/2" .

thanks Grumpy…I’m at 56-5/8” 👍

**Grumpy old man** · 01-14-2022, 05:41 PM

I have another 67 cab burried in the corner of the garage , and 2 more outside covered in tarps , I'll move some stuff out of the way and get some more measurements .

**HO455** · 01-14-2022, 05:48 PM

Sounds like Grumpy has you covered. I'm having the windshield on my Burban pulled and resealed here in another 30 minutes. Would have been perfect timing.

**A1971Blazer** · 01-14-2022, 10:39 PM

Quote:

Originally Posted by Grumpy old man

Straight across inside corner to inside corner is 56 1/2" .

Grumpy…..your cab looks fantastic…what would you take for it? cash money tomorrow?

**Grumpy old man** · 02-10-2022, 09:11 PM

Quote:

Originally Posted by A1971Blazer

Grumpy…..your cab looks fantastic…what would you take for it? cash money tomorrow?

Haha , I'm still working on that one , I just saw your post , I have another solid 67 cab with the number matching short bed frame and clean/clear title in my name I'm getting ready to sell with solid doors . and a ton of build parts . Too many projects and not enough room

**A1971Blazer** · 02-10-2022, 09:31 PM

Quote:

Originally Posted by Grumpy old man

Haha , I'm still working on that one , I just saw your post , I have another solid 67 cab with the number matching short bed frame and clean/clear title in my name I'm getting ready to sell with solid doors . and a ton of build parts . Too many projects and not enough room

I’m gonna text your phone…

**Jason Banks** · 01-14-2022, 06:11 PM

I'm going to confirm Grumpy's 56 1/2 measurement. That is what mine is.

**A1971Blazer** · 01-14-2022, 07:21 PM

this forum is better than four years of college
thanks to all…..
I’ll post the results soon
much appreciated ��

tinman_local2 · 01-14-2022, 07:28 PM

I'll post my dimensions shortly. Gotta have dinner with the wife first 😉

tinman_local2 · 01-14-2022, 08:37 PM

Same. 56 1/2".

BigBird05 · 01-14-2022, 10:15 PM

Just to check with you guys but is that the straight line dimension or is that following the windshield curve?

**Grumpy old man** · 01-14-2022, 10:25 PM

Quote:

Originally Posted by BigBird05

Just to check with you guys but is that the straight line dimension or is that following the windshield curve?

Straight across inside corner to inside corner is 56 1/2"

**A1971Blazer** · 01-14-2022, 10:26 PM

Quote:

Originally Posted by BigBird05

Just to check with you guys but is that the straight line dimension or is that following the windshield curve?

I’m certain it’s straight line….that’s close to my existing measurement with everything just vise gripped in place ….when I pulled my bracing the jig I had moved about 1/8”
I’ll make a new gauge to go across and clamp everything in place
I don’t want any surprises when I go to install the windshield

67 Blue Truck · 02-10-2022, 07:49 PM

Just to be Crystal clear, I assume you are measuring from the end of the black arrow and not the end of the red arrow?

Thanks!

**A1971Blazer** · 02-10-2022, 09:35 PM

Quote:

Originally Posted by 67 Blue Truck

Just to be Crystal clear, I assume you are measuring from the end of the black arrow and not the end of the red arrow?

Thanks!

yes…black arrow

67 Blue Truck · 02-11-2022, 10:33 AM

One last question. What is the distance between the drivers and passengers sides where the red arrow is?

**Jason Banks** · 02-11-2022, 10:38 AM

I get 57 1/4

Kind of hard to measure with one person. Tape measure basically rests on the top of the dash to measure.

67 Blue Truck · 02-11-2022, 11:16 AM

Awesome!! Thank you so much!!

**BIG ORANGE** · 05-30-2024, 08:06 PM

How about top to bottom in the center of the frame opening?
Thanks

**BIG ORANGE** · 05-31-2024, 03:26 PM

Come on guys I really need this measurement,,,,,,, please.....

**A1971Blazer** · 05-31-2024, 04:54 PM

Quote:

Originally Posted by BIG ORANGE

Come on guys I really need this measurement,,,,,,, please.....

it’s 21” pretty much all the way across in the vertical direction….inside edges of the windshield frame.

**A1971Blazer** · 05-31-2024, 06:30 PM

I made braces for that area because I'm replacing the windshield header on this cab.
It's not the best picture, but I did go out to the shed to verify...21"
Name: IMG_0309.jpg
Views: 218
Size: 60.1 KB

Name: IMG_0309.jpg
Views: 218
Size: 60.1 KB

01-14-2022, 04:54 PM	#1
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,198	Anyone have their windshield out? Need to verify a dimension Getting ready to weld in the windshield area. I need to verify the width of the opening all the way across the very top of the WS frame at the corners. I want to make sure it matches the jig that I made for the spacing I had to remove it to put in the inner A pillars __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

01-14-2022, 05:23 PM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Anyone have their windshield out? Need to verify a dimension Straight across inside corner to inside corner is 56 1/2" . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

01-14-2022, 05:41 PM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Anyone have their windshield out? Need to verify a dimension I have another 67 cab burried in the corner of the garage , and 2 more outside covered in tarps , I'll move some stuff out of the way and get some more measurements . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

01-14-2022, 05:48 PM	#5
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,350	Re: Anyone have their windshield out? Need to verify a dimension Sounds like Grumpy has you covered. I'm having the windshield on my Burban pulled and resealed here in another 30 minutes. Would have been perfect timing. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

01-14-2022, 06:11 PM	#9
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,623	Re: Anyone have their windshield out? Need to verify a dimension I'm going to confirm Grumpy's 56 1/2 measurement. That is what mine is.

01-14-2022, 07:21 PM	#10
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,198	Re: Anyone have their windshield out? Need to verify a dimension this forum is better than four years of college thanks to all….. I’ll post the results soon much appreciated �� __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

01-14-2022, 07:28 PM	#11
tinman_local2 Registered User Join Date: Jul 2015 Location: Smithton, Mo. Posts: 158	Re: Anyone have their windshield out? Need to verify a dimension I'll post my dimensions shortly. Gotta have dinner with the wife first 😉

01-14-2022, 08:37 PM	#12
tinman_local2 Registered User Join Date: Jul 2015 Location: Smithton, Mo. Posts: 158	Re: Anyone have their windshield out? Need to verify a dimension Same. 56 1/2".

01-14-2022, 10:15 PM	#13
BigBird05 Registered User Join Date: Aug 2019 Location: Cheraw Posts: 1,300	Re: Anyone have their windshield out? Need to verify a dimension Just to check with you guys but is that the straight line dimension or is that following the windshield curve?

02-10-2022, 07:49 PM	#16
67 Blue Truck Registered User Join Date: Jan 2019 Location: Madison, AL Posts: 41	Re: Anyone have their windshield out? Need to verify a dimension Just to be Crystal clear, I assume you are measuring from the end of the black arrow and not the end of the red arrow? Thanks! Last edited by 67 Blue Truck; 02-10-2022 at 07:53 PM. Reason: Picture

02-11-2022, 10:33 AM	#18
67 Blue Truck Registered User Join Date: Jan 2019 Location: Madison, AL Posts: 41	Re: Anyone have their windshield out? Need to verify a dimension One last question. What is the distance between the drivers and passengers sides where the red arrow is?

02-11-2022, 10:38 AM	#19
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,623	Re: Anyone have their windshield out? Need to verify a dimension I get 57 1/4 Kind of hard to measure with one person. Tape measure basically rests on the top of the dash to measure.

02-11-2022, 11:16 AM	#20
67 Blue Truck Registered User Join Date: Jan 2019 Location: Madison, AL Posts: 41	Re: Anyone have their windshield out? Need to verify a dimension Awesome!! Thank you so much!!

05-30-2024, 08:06 PM	#21
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Anyone have their windshield out? Need to verify a dimension How about top to bottom in the center of the frame opening? Thanks __________________ Things happen for a reason!

05-31-2024, 03:26 PM	#22
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Anyone have their windshield out? Need to verify a dimension Come on guys I really need this measurement,,,,,,, please..... __________________ Things happen for a reason!



Register or Log In To remove these advertisements.

05-31-2024, 06:30 PM	#24
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,198	Re: Anyone have their windshield out? Need to verify a dimension I made braces for that area because I'm replacing the windshield header on this cab. It's not the best picture, but I did go out to the shed to verify...21" __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.