67-72 bench seat console/cupholder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 01-22-2022, 03:46 PM

Does someone on this forum sell these? I want to be 100% sure the length and color are right for my truck.

**dave6672** · 01-22-2022, 10:33 PM

Here's a link to where you can get them. They are on Amazon and ebay as well. I have the short version in my truck so that it doesn't interfere with the shifter.

https://www.cupholdersplus.com/bench-seat-consoles.html

**TKCR** · 01-22-2022, 10:45 PM

I got mine from Classic consoles.com. Mine is called the Drinkster. But it fits perfectly on the bench seat.

tutone · 01-23-2022, 05:38 PM

I have the shorter version in my 55 sedan. Roughly 15" from end to end. Bought it at a show on a "twofer" deal. Only complaint is that the vinyl to vinyl gives off a little squeaking. I just placed a rag in between it and the seat. Problem solved.

**MikeB** · 01-23-2022, 09:15 PM

Thanks for the all the info. I just ordered some color samples from Classic Consoles.

**TKCR** · 01-23-2022, 10:25 PM

Quote:

Originally Posted by MikeB

Thanks for the all the info. I just ordered some color samples from Classic Consoles.

Back when I got mine, I actually sent them left over vinyl from my seat cover, they used it to make my console. I don’t know if they still do that.

01-22-2022, 03:46 PM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	67-72 bench seat console/cupholder Does someone on this forum sell these? I want to be 100% sure the length and color are right for my truck. __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

01-22-2022, 10:33 PM	#2
dave6672 Senior Member Join Date: Jul 2008 Location: Carrollton, KY Posts: 1,263	Re: 67-72 bench seat console/cupholder Here's a link to where you can get them. They are on Amazon and ebay as well. I have the short version in my truck so that it doesn't interfere with the shifter. https://www.cupholdersplus.com/bench-seat-consoles.html Attached Images __________________ Dave R. 1972 K20 1972 C20 Highlander 1967 C10

01-22-2022, 10:45 PM	#3
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: 67-72 bench seat console/cupholder I got mine from Classic consoles.com. Mine is called the Drinkster. But it fits perfectly on the bench seat. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

01-23-2022, 05:38 PM	#4
tutone Registered User Join Date: Mar 2016 Location: hickory, ky Posts: 1,310	Re: 67-72 bench seat console/cupholder I have the shorter version in my 55 sedan. Roughly 15" from end to end. Bought it at a show on a "twofer" deal. Only complaint is that the vinyl to vinyl gives off a little squeaking. I just placed a rag in between it and the seat. Problem solved. Attached Images __________________ :My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=807535 1972 K10 swb/1968 Camaro 350/4spd 1955 210 2 dr sedan/1998 RCSB Z71/1977 Jeep CJ5

01-23-2022, 09:15 PM	#5
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Re: 67-72 bench seat console/cupholder Thanks for the all the info. I just ordered some color samples from Classic Consoles. __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.