Rear Shock Relocation for Stock Height - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cwcarpenter98** · 03-02-2022, 06:35 PM

So I like the way this rear shock relocation was done by Frizzle_Fry http://67-72chevytrucks.com/vboard/s...05&post4730005

My question is, has anyone done this with a stock height truck, and how has it worked for you? Were you able to use the factory rear shock, or did you need to change shocks?
Again, I'm keeping my truck at stock height, so I'm wondering if it's worth the effort or only good for lowered trucks.

SCOTI · 03-03-2022, 11:46 AM

Quote:

Originally Posted by cwcarpenter98

So I like the way this rear shock relocation was done by Frizzle_Fry http://67-72chevytrucks.com/vboard/s...05&post4730005

My question is, has anyone done this with a stock height truck, and how has it worked for you? Were you able to use the factory rear shock, or did you need to change shocks?
Again, I'm keeping my truck at stock height, so I'm wondering if it's worth the effort or only good for lowered trucks.

It's worth the effort.

**cwcarpenter98** · 03-03-2022, 12:20 PM

Thanks, Scoti.

I won't be able to start on it until the summer, but I'll report on how it goes then

SpudWrench · 03-03-2022, 05:18 PM

Quote:

Originally Posted by cwcarpenter98

So I like the way this rear shock relocation was done by Frizzle_Fry http://67-72chevytrucks.com/vboard/s...05&post4730005

My question is, has anyone done this with a stock height truck, and how has it worked for you? Were you able to use the factory rear shock, or did you need to change shocks?
Again, I'm keeping my truck at stock height, so I'm wondering if it's worth the effort or only good for lowered trucks.

CW ill be drawing up a rear bracket for my 65 c20 to use at stock height. Plasma cut. Can do 3/16 and up. ill let you know when its done. Im using my own truck for fit testing. Might be able to hook you up

Front bracket I made. Put a preliminary bend in it. Angle has not been set yet. Came out tits
http://67-72chevytrucks.com/vboard/s...d.php?t=831662

Pitpig · 03-11-2022, 07:21 PM

I used the no limit.net shock relocate kit on a stock height 66. You have to get taller shocks, but it cleans up rear and makes exhaust routing easier. It’s similar in function to what you referenced

**cwcarpenter98** · 03-13-2022, 01:52 PM

Quote:

Originally Posted by SpudWrench

CW ill be drawing up a rear bracket for my 65 c20 to use at stock height. Plasma cut. Can do 3/16 and up. ill let you know when its done. Im using my own truck for fit testing. Might be able to hook you up

Front bracket I made. Put a preliminary bend in it. Angle has not been set yet. Came out tits
http://67-72chevytrucks.com/vboard/s...d.php?t=831662

Please keep us updated on what you come up with.

Quote:

Originally Posted by Pitpig

I used the no limit.net shock relocate kit on a stock height 66. You have to get taller shocks, but it cleans up rear and makes exhaust routing easier. It’s similar in function to what you referenced

Did you notice any difference between stock and relocated characteristics?

Pitpig · 03-20-2022, 09:48 PM

I never had the chance to drive it before I installed it. No limit.net site lays out all the virtues, It really cleaned up space for exhaust

03-02-2022, 06:35 PM	#1
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Rear Shock Relocation for Stock Height So I like the way this rear shock relocation was done by Frizzle_Fry http://67-72chevytrucks.com/vboard/s...05&post4730005 My question is, has anyone done this with a stock height truck, and how has it worked for you? Were you able to use the factory rear shock, or did you need to change shocks? Again, I'm keeping my truck at stock height, so I'm wondering if it's worth the effort or only good for lowered trucks. __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-03-2022, 12:20 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: Rear Shock Relocation for Stock Height Thanks, Scoti. I won't be able to start on it until the summer, but I'll report on how it goes then __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-11-2022, 07:21 PM	#5
Pitpig Registered User Join Date: Jan 2019 Location: Bonner Springs, KS Posts: 56	Re: Rear Shock Relocation for Stock Height I used the no limit.net shock relocate kit on a stock height 66. You have to get taller shocks, but it cleans up rear and makes exhaust routing easier. It’s similar in function to what you referenced

03-20-2022, 09:48 PM	#7
Pitpig Registered User Join Date: Jan 2019 Location: Bonner Springs, KS Posts: 56	Re: Rear Shock Relocation for Stock Height I never had the chance to drive it before I installed it. No limit.net site lays out all the virtues, It really cleaned up space for exhaust

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.