Turn signal cancel cam - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 03-15-2022, 11:52 AM

I'm just about to finish the rebuild on a 69 Chevy truck non-tilt column, and I'd like to replace the 30 year old turn signal cancel cam. The steering wheel is from a late 80s/ early 90s Chevy truck, but I can't remember if I used a 69 cam or one from a later model, or if it even makes a difference. Is it typical that the "lobes" aren't evenly spaced?

Thanks for your help.

**Palf70Step** · 03-15-2022, 12:43 PM

I have the 88-94 style truck wheel on my 70 and just used stock canceling thingie. Plugged the horn wire into the stock piece. Looks just like the piece you are showing, so I assume it is using stock cancel thingie.

**truckster** · 03-15-2022, 01:20 PM

Quote:

Originally Posted by Palf70Step

I have the 88-94 style truck wheel on my 70 and just used stock canceling thingie. Plugged the horn wire into the stock piece. Looks just like the piece you are showing, so I assume it is using stock cancel thingie.

When you use technical jargon like that it confuses the rest of us...

03-15-2022, 11:52 AM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Turn signal cancel cam I'm just about to finish the rebuild on a 69 Chevy truck non-tilt column, and I'd like to replace the 30 year old turn signal cancel cam. The steering wheel is from a late 80s/ early 90s Chevy truck, but I can't remember if I used a 69 cam or one from a later model, or if it even makes a difference. Is it typical that the "lobes" aren't evenly spaced? Thanks for your help. Attached Images __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

03-15-2022, 12:43 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Turn signal cancel cam I have the 88-94 style truck wheel on my 70 and just used stock canceling thingie. Plugged the horn wire into the stock piece. Looks just like the piece you are showing, so I assume it is using stock cancel thingie. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 03-15-2022 at 12:58 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.