Side Glass Removal Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**7D2N** · 06-05-2022, 07:39 PM

I plan to have my single wall top raptor lined but I need to change the side glass. I found some info here to get seal warm and plastic tools to pry out, this is original near as I can tell it's not very flexible. Do they reproduce single-wall window seals?
Thanks 7D2N

**DeadheadNM** · 06-05-2022, 09:30 PM

Single wall glass seals are available. SoffSeal product maybe? Classic Heartbeat and GMC Pauls both carry these.

**7D2N** · 06-06-2022, 09:49 PM

Thanks, I will check into them.

**Tom Vogel** · 06-07-2022, 09:43 PM

Take a sharp knife to your old rubber. Cut off one side and push out the glass.

**7D2N** · 06-08-2022, 09:24 PM

Thanks Tom, I will probably have to cut the old rubber seals not to damage my glass.

**Tom Vogel** · 06-09-2022, 10:25 PM

Quote:

Originally Posted by 7D2N

Thanks Tom, I will probably have to cut the old rubber seals not to damage my glass.

I guess this goes without saying, but have someone outside (or inside) to keep the wondow from falling.

**truckster** · 06-09-2022, 10:55 PM

A little glass cleaner on the rubber will make your utility knife slice through it much more easily.

scott123 · 06-24-2022, 10:50 AM

Check as you push. I have seen a number where adhesive was used and it gets on the top itself. Easy to break a window when pushing. But yep, the utility knife rips right thru most of the time.

Made me think of a funny story.....I had a top once that was way beyond any repair. Just not a lot to work with but it had two really nice side windows, Sun ray at that.

A guy wanted to buy them but they had been glued in the rubber and the rubber had been glues to the top. He offered way more that what I thought they were worth but back tracked when they would not come out. He said at home he could use a heat gun and get them out.

I told him to stand back and I uses a circular/skill saw and cut his two windows out giving him a bit of top as well.

The next day he posted he had met the "Marcel Leddbetter" of Blazer parts.

Not suggested as a means to remove your windows.

Scott

06-05-2022, 07:39 PM	#1
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 718	Side Glass Removal Question I plan to have my single wall top raptor lined but I need to change the side glass. I found some info here to get seal warm and plastic tools to pry out, this is original near as I can tell it's not very flexible. Do they reproduce single-wall window seals? Thanks 7D2N __________________ Just for the fun of it

06-05-2022, 09:30 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: Side Glass Removal Question Single wall glass seals are available. SoffSeal product maybe? Classic Heartbeat and GMC Pauls both carry these. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-06-2022, 09:49 PM	#3
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 718	Re: Side Glass Removal Question Thanks, I will check into them. __________________ Just for the fun of it

06-07-2022, 09:43 PM	#4
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: Side Glass Removal Question Take a sharp knife to your old rubber. Cut off one side and push out the glass.

06-08-2022, 09:24 PM	#5
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 718	Re: Side Glass Removal Question Thanks Tom, I will probably have to cut the old rubber seals not to damage my glass. __________________ Just for the fun of it

06-09-2022, 10:55 PM	#7
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,976	Re: Side Glass Removal Question A little glass cleaner on the rubber will make your utility knife slice through it much more easily. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

06-24-2022, 10:50 AM	#8
scott123 Registered User Join Date: Dec 2007 Location: Middleburg, North Carolina Posts: 480	Re: Side Glass Removal Question Check as you push. I have seen a number where adhesive was used and it gets on the top itself. Easy to break a window when pushing. But yep, the utility knife rips right thru most of the time. Made me think of a funny story.....I had a top once that was way beyond any repair. Just not a lot to work with but it had two really nice side windows, Sun ray at that. A guy wanted to buy them but they had been glued in the rubber and the rubber had been glues to the top. He offered way more that what I thought they were worth but back tracked when they would not come out. He said at home he could use a heat gun and get them out. I told him to stand back and I uses a circular/skill saw and cut his two windows out giving him a bit of top as well. The next day he posted he had met the "Marcel Leddbetter" of Blazer parts. Not suggested as a means to remove your windows. Scott

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.