Wheel ID - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Alloyvert** · 08-20-2022, 11:05 AM

I finally located a matching wheel for my '64 and replaced this oddball that was on the truck when I bought it. Curious of the year and model??

oem4me · 08-20-2022, 12:17 PM

I could be wrong, but if that wheel is 17.5" its is very hard to find. The eight lug version of that wheel was standard equip for C20's in the 60's and used to be fairly common. That is not at all the case with the half ton version, hence they are highly sought after especially amongst the 4WD crowd.

**michael bustamante** · 08-20-2022, 01:20 PM

with is the tire size and the width?
15 or 16 inch? and bead to bead is it 5"?

Lokin4AReason · 08-20-2022, 02:49 PM

Is there any stampings on it like around the valve stem ?

**Alloyvert** · 08-20-2022, 08:37 PM

It is 15x5.5 and not finding any stampings aside from the inner rim with “made in the USA 15 x 5 1/2 K NT 1 6”

**60-66** · 08-21-2022, 12:21 PM

Its a 1960 rim if it has the bumps on the outer edge of rim , or a 1961 possibly if no bumps .

**paulspickupparts** · 08-21-2022, 10:55 PM

Also used on GMC of the same era including 59

08-20-2022, 11:05 AM	#1
Alloyvert Active Member Join Date: Nov 2019 Location: SE WI Posts: 125	Wheel ID I finally located a matching wheel for my '64 and replaced this oddball that was on the truck when I bought it. Curious of the year and model?? Attached Images

08-20-2022, 12:17 PM	#2
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: Wheel ID I could be wrong, but if that wheel is 17.5" its is very hard to find. The eight lug version of that wheel was standard equip for C20's in the 60's and used to be fairly common. That is not at all the case with the half ton version, hence they are highly sought after especially amongst the 4WD crowd.

08-20-2022, 01:20 PM	#3
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Wheel ID with is the tire size and the width? 15 or 16 inch? and bead to bead is it 5"? __________________ 1967custom

08-20-2022, 02:49 PM	#4
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 972	Re: Wheel ID Is there any stampings on it like around the valve stem ? __________________ dont want to hear excuses, i want to hear solution(s)

08-20-2022, 08:37 PM	#5
Alloyvert Active Member Join Date: Nov 2019 Location: SE WI Posts: 125	Re: Wheel ID It is 15x5.5 and not finding any stampings aside from the inner rim with “made in the USA 15 x 5 1/2 K NT 1 6”

08-21-2022, 12:21 PM	#6
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Wheel ID Its a 1960 rim if it has the bumps on the outer edge of rim , or a 1961 possibly if no bumps . __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

08-21-2022, 10:55 PM	#7
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: Wheel ID Also used on GMC of the same era including 59

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.