OR F/S GM NOS & New Repro Steering Column Replacement Parts

[Classic Bowties]

We just pulled out some replacement steering column parts for a couple of other members and have a few extras sitting bench top ready to ship out. We can ship most of the below listed small parts in the CONUS for $8. via USPS ground advantage and will offer combined shipment on multiple purchases here in thread or with any of our other parts listings, we can also ship parts out using the USPS priority flat rate boxes in case you want to add or request any other needed column parts not pictured. If interested, online funds can be sent via Zelle and CashApp, Credit/Debit Card over the phone or Check/Money Order by mail. Thanks, Mel


#1 } GM NOS non-tilt steering column upper shaft bearing. $60. ea. ***Qty. 7 Sold/Shipped***

#2 } GM NOS tilt or non-tilt steering column lower shaft bearing. $75. ea. ***Qty. 9 Sold/Shipped***

#3 } GM NOS non-tilt steering column horn contact t/s cancel cam. $30. ea. ***Qty. 6 Sold/Shipped***

#4 } NORS horn contact pin, spring & retainer kit. $20. ea. ***Qty. 8 Sold/Shipped***

#5 } Repro non-tilt steering column horn contact t/s cancel cam. $15. ea. ***Qty. 5 Sold/Shipped***

#6 } Repro horn contact pin, spring & retainer kit. $8. ea. ***Qty. 7 Sold/Shipped***

#7 } GM NOS non-tilt shift indicator fiber optic cable bulb socket, see post #49 for pics. $35. ea. ***Qty. 3 Sold/Shipped***

#8 } OE Used non-tilt shift indicator fiber optic cable socket w/tested bulb, see post #49 for pics. $18. ea. ***Qty. 4 Sold/Shipped***

#9 } OE Used inner main steering shaft from a 72 non-tilt steering column, see post #51 for pics. $75.

#10 } GM NOS 67-70 3 speed manual column shift lever control housing (shift bell), see post #60/#61 for pics. $125. ***Pending***

#11 } GM NOS non-tilt shift lever control lower plastic wear bushing, see post #60 for pics. $20. ea. ***Qty. 2 Sold/Shipped***

#12 } GM NOS non-tilt shift lever control upper rubber washer bushing, see post #60 for pics. $20. ea. ***Qty. 5 Sold/Shipped***

#13 } GM NOS non-tilt shift lever control upper plastic thrust washer bushing, see post #60 for pics. $20. ea. ***Qty. 2 Sold/Shipped***

#14 } GM NOS tilt or non-tilt column upper shift linkage rod to shift tube rubber grommet, see post #70 for pics. $15. ea. ***Qty. 9 Sold/Shipped***
***Add a matching GM NOS inner steel bushing spacer to above #14 shift tube grommet for $10. more, see post #71 for pics.***

#15 } GM NOS lower shift linkage rod to 3 spd. manual trans shift lever grommet, see post #70 for pics. $15. ea. ***Qty. 6 Sold/Shipped***

.

[jmader]

I'll take the NOS cancel cam and spring kit

[Classic Bowties]

Originally Posted by jmader

I'll take the NOS cancel cam and spring kit

Okay, the total and payment info for sending of funds via paypal has been forwarded on Wed. 09/14,
please confirm your full shipping address and we'll get the parts ready for shipment. Thanks, Mel

[Classic Bowties]

Originally Posted by jmader

I'll take the NOS cancel cam and spring kit

Your column parts have been shipped off, the package went out via USPS first class on Wed. 09/14 and your expected delivery
day is Mon. 09/19. Thanks again for your order and let me know if we can help with any other 67-72 parts needs. Mel

[CKfan]

Quote:
Originally Posted by Classic Bowties View Post
We can offer/supply the upper rubber washer bushing and the lower plastic wear bushing both in GM NOS, if interested post a reply in the below linked column parts f/s thread and we'll get the two parts pulled out and pictured for you. Mel

http://67-72chevytrucks.com/vboard/s...d.php?t=838093


Need the upper rubber washer bushing if you have one. $?
Thanks

[Classic Bowties]

Originally Posted by CKfan

Quote:
Originally Posted by Classic Bowties View Post
We can offer/supply the upper rubber washer bushing and the lower plastic wear bushing both in GM NOS, if interested post a reply in the below linked column parts f/s thread and we'll get the two parts pulled out and pictured for you. Mel

http://67-72chevytrucks.com/vboard/s...d.php?t=838093


Need the upper rubber washer bushing if you have one. $?
Thanks

CKfan, here are the requested wear parts for your 1969 non-tilt 4 speed/floor shift steering column, am just now seeing that you've found the lower plastic wear bushing after taking these pics so disregard the NOS plastic bushings, we can offer you the upper rubber washer bushings in GM NOS for $18. ea + $8. for CONUS shipment. Lmk, Mel
.

[CKfan]

Will take 1 upper bushing rubber please.
Thank you for the response.

[lkt1954]

Do you have any of the brackets that hold the column to the dash?
Thanks

[Classic Bowties]

Originally Posted by lkt1954

Do you have any of the brackets that hold the column to the dash?
Thanks

Yes, we can get a set of OE used steering column install brackets headed your way, let me grab you some pics and pricing. Mel

[Classic Bowties]

Originally Posted by lkt1954

Do you have any of the brackets that hold the column to the dash?
Thanks

We just got the OE steering column install hardware/bracketry pulled out and listed in the below linked parts board f/s thread. Have a look and let us know, Mel


http://67-72chevytrucks.com/vboard/s...d.php?t=846472

.

[chev-obsession]

I will take one NOS lower tilt column bearing

[Classic Bowties]

Originally Posted by chev-obsession

I will take one NOS lower tilt column bearing

Okay, the total and payment info for sending of funds via paypal has been forwarded on Sun. 08/06, please confirm your full shipping address and we'll get the part ready for shipment. Thanks again, Mel

[Classic Bowties]

Originally Posted by chev-obsession

I will take one NOS lower tilt column bearing

Your GM NOS lower column bearing has been shipped off, the package went out via USPS ground advantage on Mon. 08/07 and your expected delivery day is this Wed. 08/09. Thanks again for your order and repeat business, let me know if we can help with any other 67-72 parts needs. Mel

[Classic Bowties]

Adding this new repro tilt column 4 spd/overdrive shift indicator dial lens for member steves1967, will offer the shift lens to you for $15. shipped and our payment options are listed in the first post at top of thread. We also have the matching tilt column specific shift indicator pointer and shift indicator lens housing available in new repro and can combine ship all if needed. Mel
.

[Classic Bowties]

sloGMC, here are some pics of the OE used tilt column shift indicator dial lamp steel cap & plastic filter setup that we can get headed your way, the other lamp cap/filter set marked sold has been shipped off to member Richard. The lamp filter parts are $25. + $7. for CONUS shipping ***Qty. 5 Sold/Shipped***, the total and payment info for sending of funds have forwarded on Tue. 08/15, please confirm your full shipping address and we'll get the parts ready for shipment. Thanks, Mel
.

[sloGMC]

Originally Posted by Classic Bowties

sloGMC, here are some pics of the OE used tilt column shift indicator dial lamp cap/filter setup that we can get headed your way, the other lamp cap/filter set marked sold has been shipped off to member Richard. The pair of lamp filter parts are $25. + $6. for CONUS shipping, the total and payment info for sending of funds via paypal has been forwarded on Tue. 08/15, please confirm your full shipping address and we'll get the parts ready for shipment. Thanks, Mel
.

Thank you. Since it appears I actually do have one installed in my tilt (albeit, amber) I will pass for now. I would feel bad hoarding two.

[gdelaney5]

Mel,

I am interested in a set of any NOS internal components that you still have for non tilt automatic steering column. Could you provide a list and $ for what you still have available?

Thanks! Greg

[Classic Bowties]

Originally Posted by gdelaney5

Mel,

I am interested in a set of any NOS internal components that you still have for non tilt automatic steering column. Could you provide a list and $ for what you still have available?

Thanks! Greg

Hi Greg, to save a bit of time on our end let us know which wear parts you are chasing and I will reply back with availability and cost. Going off of memory for your column shift non-tilt steering column, we have the NOS upper & lower bearings, NOS lower bearing spacer mount, NOS lower bearing tension spring, NOS upper plastic and rubber bushings, NOS horn contact t/s cancel cam and the NOS turn signal switch and harness. Also pending confirmation of the actual year of steering column that you are working on, we may have the NOS shift indicator pointer, NOS shift indicator lens housing and both NOS chrome shift and turn levers. Let us know, Mel

[gdelaney5]

Mel,

My column is for a 1972 k10

I will take:

NOS upper & lower bearings
NOS lower bearing tension spring
NOS upper plastic and rubber bushings
NOS horn contact t/s cancel cam
NOS turn signal switch and harness
NOS shift indicator lens housing
NOS chrome shift levers
NOS chrome turn lever

Thanks,
Greg

[EdwardSams]

Mel, you did it again. The parts arrived quickly and beautifully packaged. Amazon could learn a thing or two from you.

Thank you.

[gdelaney5]

Mel,

In addition to my list above, if you have a 4sp overdrive lens for the 72 column I will take one of those as well.

Thank you,
Greg

[pjmoreland]

****EDITED**** I'm after part number 3916047/474102

I'll take one of these, please, if available.

#4 / NORS horn contact pin, spring & retainer kit. $20. ***Qty. 3 Sold/Shipped*** Have more on hand/available...

Also, please let me know if you have a 3900514 upper spring for a tilt column. Thank you.

[Classic Bowties]

Originally Posted by pjmoreland

****EDITED**** I'm after part number 3916047/474102

I'll take one of these, please, if available.

#4 / NORS horn contact pin, spring & retainer kit. $20. ***Qty. 3 Sold/Shipped*** Have more on hand/available...

Also, please let me know if you have a 3900514 upper spring for a tilt column. Thank you.

Okay, we got'ya down for one three pc. #4/NORS horn contact pin, spring & retainer kit, I still need to get to gdelaney5's above column parts request and will check on the tilt only upper cam spring for you next. I can confirm that we do have the 3900514 springs on hand in both GM NOS and OE used, but we always seem to be chasing these often missing/hard to find cancel cam springs for our own tilt column builds. While checking on our available on hand tilt cam spring quantity, would you need/want the upper tilt column specific horn contact t/s cancel cam in either GM NOS, OE used or new repro? We have all three tilt cancel cam options on hand/available ready to ship and these small column parts can all be combined and sent out for the one $7. shipping charge. Let me know, Mel

[pjmoreland]

Originally Posted by Classic Bowties

While checking on our available on hand tilt cam spring quantity, would you need/want the upper tilt column specific horn contact t/s cancel cam in either GM NOS, OE used or new repro?

I've already got the tilt horn contact t/s cancel cam, but it's missing the horn contact pin/spring/retainer.

Originally Posted by Classic Bowties

these small column parts can all be combined and sent out for the one $7. shipping charge. Let me know, Mel

Sounds great. I prefer OE on the 3900514 cam spring, if you've got it, but NOS will work, too. Thank you.

[pjmoreland]

In addition to this...

#4 / NORS horn contact pin, spring & retainer kit. $20. ***Qty. 3 Sold/Shipped*** Have more on hand/available...

and this...

OE (preferred) or NOS tilt column 3900514 cam spring

I'm also looking for this:

Clutch pedal push rod for a 2WD SBC

Any chance you might have one?