exhaust couplers from trucks tv - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67dragtruck · 01-06-2004, 08:07 PM

Can anybody tell me where they got the exhaust couplers to pass the exhaust through the crossmember on trucks tv. I've been trying to catch the episode again because the website doesn't even mention them. Can anybody help?

I know I can make something myself, but the ones they used sure did look cool

Tom

cdowns · 01-06-2004, 08:48 PM

do you mean the flexible stainless couplers ?? if so believe it or not they're available at jcwhitney

Ole Blue · 01-06-2004, 09:33 PM

I believe that the ones on copperhead are by flowmaster.

69 air cab · 01-06-2004, 09:54 PM

67dragtruck......I'm glad you asked this because I want to do the same. I have not looked but the TRUCKs site should say where they came from and I think Flowmaster also. What I was wondering is how much of that cross member can be cut out for the pipe without taking away from it?

68C10 · 01-06-2004, 10:24 PM

I'm pretty sure I remember him saying they were one-of-a-kind custom made "thingys".

Blue Beard · 01-06-2004, 10:42 PM

Make them yourself.....have your on one of a kind.........Then of course share the idea with us........

69 air cab · 01-06-2004, 11:03 PM

I just briefly seached the Trucks site and did not see anything so I sent Stacy an email.......not sure that will help......but we will see. Early Classics may have furnished it........I tried to look under one of the show products for them but it looked like it was going to take two months to open.

71chevylongbed · 01-07-2004, 12:39 AM

are you thlking about the brackets that bolted to the crossmember where the pipe ran through to secure the pipe? i think he said that they were made by Early Classic but he said you would have to call them because they weren't listed in the catalogue.

Blue Beard · 01-07-2004, 12:51 AM

Anyone know the website for trucktv?

s95930 · 01-07-2004, 12:56 AM

http://www.truckstv.com/

zenish · 01-07-2004, 09:47 PM

i liked them when i saw the show,but they look like they would rust out.

01-06-2004, 08:07 PM	#1
67dragtruck Registered User Join Date: May 2001 Location: Bethlehem, GA, USA Posts: 389	exhaust couplers from trucks tv Can anybody tell me where they got the exhaust couplers to pass the exhaust through the crossmember on trucks tv. I've been trying to catch the episode again because the website doesn't even mention them. Can anybody help? I know I can make something myself, but the ones they used sure did look cool Tom

01-06-2004, 08:48 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	do you mean the flexible stainless couplers ?? if so believe it or not they're available at jcwhitney __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-06-2004, 09:33 PM	#3
Ole Blue Registered User Join Date: Sep 2003 Location: Holts Summit, Mo. Posts: 58	I believe that the ones on copperhead are by flowmaster. __________________ 72 Cheyenne Super waiting on 4/6 drop,BB and 700r4

01-06-2004, 10:24 PM	#5
68C10 Registered User Join Date: Dec 1999 Location: Central New Jersey, USA Posts: 328	I'm pretty sure I remember him saying they were one-of-a-kind custom made "thingys". __________________ 68C10 1968 C10 SWB No Options but 40K original miles 1967 K20 LWB 283 4-speed South Plainfield, NJ

01-06-2004, 10:42 PM	#6
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Make them yourself.....have your on one of a kind.........Then of course share the idea with us........ __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-06-2004, 09:54 PM	#4
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	67dragtruck......I'm glad you asked this because I want to do the same. I have not looked but the TRUCKs site should say where they came from and I think Flowmaster also. What I was wondering is how much of that cross member can be cut out for the pipe without taking away from it?

01-06-2004, 11:03 PM	#7
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	I just briefly seached the Trucks site and did not see anything so I sent Stacy an email.......not sure that will help......but we will see. Early Classics may have furnished it........I tried to look under one of the show products for them but it looked like it was going to take two months to open.

01-07-2004, 12:39 AM	#8
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	are you thlking about the brackets that bolted to the crossmember where the pipe ran through to secure the pipe? i think he said that they were made by Early Classic but he said you would have to call them because they weren't listed in the catalogue. __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

01-07-2004, 12:51 AM	#9
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Anyone know the website for trucktv? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-07-2004, 12:56 AM	#10
s95930 A-Adam A-Adam Join Date: Apr 2003 Location: Sarpy Co. Ne. South of Omaha Posts: 263	http://www.truckstv.com/ __________________ 70 3/4 ton GMC Camper Special

01-07-2004, 09:47 PM	#11
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	i liked them when i saw the show,but they look like they would rust out.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.