Modify auto steering column for a 4 speed

[lilpoindexter]

Hello: I have a '63 c10. im putting in an LQ4/4l80e. I have a steering column from a '66 GMC with a 2 speed automatic. Is it possible to modify this column to use with a 4 speed automatic?

[64shortbox]

Would any of these work?

https://www.summitracing.com/parts/i...RoCjFMQAvD_BwE

https://www.summitracing.com/parts/s...xoCL_YQAvD_BwE

https://www.lmctruck.com/1960-66-che...hift-indicator

[forestb]

I used an adjustable column shift linkage from Lokar to hook up my 700r4 to my stock automatic transmission column with no modification to the column. The transmission shift gate seems to over ride the one on the column. I added a shift indicator lens from a car with a 3 speed trans. I think it was an impala. The hardest part was getting the indicator to line up which gear the trans is in.

[64shortbox]

I did the same as forestb, but me being cheap used a Lokor knock off kit like this one: https://www.ebay.com/itm/40355778437...Bk9SR8iIupXXYg

Granted, I was doing a 350/350 combo but there are no detents in the column to let you feel the gear you selected, that feel is the feedback from the transmission as it mechanicaly goes through the gears. Here's a link waht I did to my 64 - starting at post#8: https://www.ebay.com/itm/40355778437...Bk9SR8iIupXXYg