Starter not turning over - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bermblaster · 01-12-2004, 08:24 PM

I have 12v to my ignition switch. When I try to jump across the switch to the sol. I have no starter. I can pull the plug in the engine compartment firewall and jump to the sol. and the starter cranks. I am assuming that I have an open in my sol wire inside the cab. I looked at all the fuses and they all look fine. IS THERE A FUSE IN THE SOLENOID CIRCUIT??? Does any body know of A web site that would have the wire diagrams? I want to avoid running A new wire inside my cab. PLEASE HELP!!
Thanks
BERM

cdowns · 01-12-2004, 09:32 PM

check your neutral-safety-switch

Bermblaster · 01-12-2004, 09:51 PM

Manual transmission no clutch switch. Thanks

BERM

A.P. · 01-12-2004, 09:56 PM

Hope this helps...

http://www.geocities.com/chevroletc1070/wiringdias.html

A.P.

Bermblaster · 01-12-2004, 10:52 PM

Thank You very much A.P. Thats just what the doctor ordered. I really appreciate it, and that site is in my favorites.

Thanks
BERM

A.P. · 01-13-2004, 04:36 AM

Your welcome Berm. That site was posted by another member a long time ago. And its in my favorites too. Glad I could help.

A.P.

01-12-2004, 08:24 PM	#1
Bermblaster Registered User Join Date: Nov 2003 Location: Boise Id Posts: 34	Starter not turning over I have 12v to my ignition switch. When I try to jump across the switch to the sol. I have no starter. I can pull the plug in the engine compartment firewall and jump to the sol. and the starter cranks. I am assuming that I have an open in my sol wire inside the cab. I looked at all the fuses and they all look fine. IS THERE A FUSE IN THE SOLENOID CIRCUIT??? Does any body know of A web site that would have the wire diagrams? I want to avoid running A new wire inside my cab. PLEASE HELP!! Thanks BERM __________________ "70" Chevy 4X4 Short Step "68" Mustang "03" FORD 4X4 V10 Last edited by Bermblaster; 01-12-2004 at 08:59 PM.

01-12-2004, 09:32 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	check your neutral-safety-switch __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-12-2004, 09:51 PM	#3
Bermblaster Registered User Join Date: Nov 2003 Location: Boise Id Posts: 34	Manual transmission no clutch switch. Thanks BERM __________________ "70" Chevy 4X4 Short Step "68" Mustang "03" FORD 4X4 V10

01-12-2004, 10:52 PM	#5
Bermblaster Registered User Join Date: Nov 2003 Location: Boise Id Posts: 34	Thank You very much A.P. Thats just what the doctor ordered. I really appreciate it, and that site is in my favorites. Thanks BERM __________________ "70" Chevy 4X4 Short Step "68" Mustang "03" FORD 4X4 V10

01-13-2004, 04:36 AM	#6
A.P. Black 72 Chevy Join Date: May 2002 Location: Los Angeles, California Posts: 662	Your welcome Berm. That site was posted by another member a long time ago. And its in my favorites too. Glad I could help. A.P. __________________ 72 Chevy, SWB, 350engine, TH400

01-12-2004, 09:56 PM	#4
A.P. Black 72 Chevy Join Date: May 2002 Location: Los Angeles, California Posts: 662	Hope this helps... http://www.geocities.com/chevroletc1070/wiringdias.html A.P.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.