Each side of the frame is the same height!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Heartbeat** · 01-14-2004, 04:03 PM

Well I managed to find a pair of 5 bolt rags that were the same size, so I could set the front end down on the ground. I needed to do that because I want to lift the rear up high enough to work under it confortably. I am pulling the rear end out and replacing it with a 5 bolt 3.07 possi I have. Any way I measured the frame rails to the ground and the are spot on even!! 11 1/4" !! What a load off my mind!! LOL I took a few pictures while I was at it.

**Classic Heartbeat** · 01-14-2004, 04:04 PM

I can't wait to find wheels that I like...

**Classic Heartbeat** · 01-14-2004, 04:06 PM

It has been a long time since the front has sat on the floor!! Forward progress!!LOL

Perchjerker · 01-14-2004, 04:06 PM

Looking good!

meathead95 · 01-14-2004, 04:22 PM

looks good. I cant wait to get my cab back on the frame lol........

**old Rusty C10** · 01-14-2004, 04:40 PM

WOW thats looking gorgeous!!

Jace's68 · 01-14-2004, 05:43 PM

Looks good. I'm jealous.

skokie · 01-14-2004, 05:49 PM

Looking good there Wes!!

**ScottH** · 01-14-2004, 05:56 PM

Wes, looks great.....btw what did u use on the frame and front end parts?

**Classic Heartbeat** · 01-14-2004, 08:49 PM

Thanks guys, I appriciate the compliments. It seems like it is taking forever to get this far, and one just doesn't know how something will turn out untill he does it. LOL
Scott, I used black base coat clear coat on the frame, then I powder coated the front cross member, BB engine stands & brackets, upper & lower "A" arms, sway bar, lowering spindles, lowering springs, back plates, and sway bar brackets. As for all of the new Moog front end components, I just rattle canned them gloss black. WES www.ClassicHeartbeat.com

tomsC10R · 01-14-2004, 08:56 PM

Keep up the good work!!

FRENCHBLUE72 · 01-14-2004, 09:06 PM

Sweeeeeet ...

**Canadian694x4** · 01-14-2004, 09:46 PM

Wes...Looking great as always man! Keep Up That Forward Progress

dinnut · 01-14-2004, 09:55 PM

that looks great!

http://www.billetspecialties.com/ite...scid=1&pid=578
those wheels would look incredible on that truck!

Wootdog · 01-14-2004, 09:57 PM

Wes. I wish I had all that good stuff you sell at my disposal. but then I would be in even in more debt with a 67 and 68. Wootdog

**Classic Heartbeat** · 01-15-2004, 03:17 PM

Those wheels are a little more pricey than I had hoped to spend... Nice looking wheels though!! Wootdog, I give myself a little discount on parts so the price isn't so bad..LOL Thanks again for the compliments... Here is how it is setting now. It looks like the rear may be lower than the front a little. It is hard to tell from these pictures, with the angle. There is a big 4X4 sitting next to it getting new patch panels installed, so the pictures are not the best. WES www.ClassicHeartbeat.com

**Classic Heartbeat** · 01-15-2004, 03:19 PM

Front view other side...

landon4421 · 01-15-2004, 03:37 PM

at least someone is making progress !

Looking good WES

**Palf70Step** · 01-15-2004, 03:40 PM

Very nice.....That BB will bring the front down for ya

**CPNE** · 01-15-2004, 04:01 PM

Looks great by why in Gods name would anybody delete their heater?

**Classic Heartbeat** · 01-15-2004, 04:33 PM

Well I deleted the heater because I am going to install an "Old Air" A/C system. It comes complete with a heater...

WES www.ClassicHeartbeat.com

**CPNE** · 01-15-2004, 04:40 PM

I don't understand the need for A/C either?

**Classic Heartbeat** · 01-15-2004, 05:51 PM

Got to be cool on those 2 or 3 days that it gets up to 90 degrees here... LOL WES www.ClassicHeartbeat.com

01-14-2004, 04:03 PM	#1
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Each side of the frame is the same height!! Well I managed to find a pair of 5 bolt rags that were the same size, so I could set the front end down on the ground. I needed to do that because I want to lift the rear up high enough to work under it confortably. I am pulling the rear end out and replacing it with a 5 bolt 3.07 possi I have. Any way I measured the frame rails to the ground and the are spot on even!! 11 1/4" !! What a load off my mind!! LOL I took a few pictures while I was at it. __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 07:12 PM.

01-14-2004, 04:04 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	I can't wait to find wheels that I like... __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 07:12 PM.

01-14-2004, 04:06 PM	#3
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	It has been a long time since the front has sat on the floor!! Forward progress!!LOL __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 07:12 PM.

01-14-2004, 04:06 PM	#4
Perchjerker Beer Power!!!!!!!!!! Join Date: Nov 2003 Location: Nacogdoches, TX Posts: 280	Looking good! __________________ Rather be fishin'

01-14-2004, 04:22 PM	#5
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	looks good. I cant wait to get my cab back on the frame lol........ __________________ 72 2wd blazer 72 swb 4x4

01-14-2004, 04:40 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	WOW thats looking gorgeous!! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-14-2004, 05:43 PM	#7
Jace's68 Registered User Join Date: Sep 2002 Location: Kentucky Posts: 107	Looks good. I'm jealous.

01-14-2004, 05:49 PM	#8
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Looking good there Wes!! __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

01-14-2004, 05:56 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Wes, looks great.....btw what did u use on the frame and front end parts?

01-14-2004, 08:49 PM	#10
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Thanks guys, I appriciate the compliments. It seems like it is taking forever to get this far, and one just doesn't know how something will turn out untill he does it. LOL Scott, I used black base coat clear coat on the frame, then I powder coated the front cross member, BB engine stands & brackets, upper & lower "A" arms, sway bar, lowering spindles, lowering springs, back plates, and sway bar brackets. As for all of the new Moog front end components, I just rattle canned them gloss black. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-14-2004, 08:56 PM	#11
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	Keep up the good work!! __________________ Tom 1968 C10 LWB. 402 BB, Holley MPI, 700R4. 4wheel Hydroboost Disk Brakes.

01-14-2004, 09:06 PM	#12
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Sweeeeeet ... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-14-2004, 09:46 PM	#13
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Wes...Looking great as always man! Keep Up That Forward Progress __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

01-14-2004, 09:55 PM	#14
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	that looks great! http://www.billetspecialties.com/ite...scid=1&pid=578 those wheels would look incredible on that truck! __________________ 70 longbed 496/th400/Ford 9"

01-14-2004, 09:57 PM	#15
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Looks Good Wes. I wish I had all that good stuff you sell at my disposal. but then I would be in even in more debt with a 67 and 68. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT



Register or Log In To remove these advertisements.

01-15-2004, 03:17 PM	#16
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Those wheels are a little more pricey than I had hoped to spend... Nice looking wheels though!! Wootdog, I give myself a little discount on parts so the price isn't so bad..LOL Thanks again for the compliments... Here is how it is setting now. It looks like the rear may be lower than the front a little. It is hard to tell from these pictures, with the angle. There is a big 4X4 sitting next to it getting new patch panels installed, so the pictures are not the best. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 07:12 PM.

01-15-2004, 03:19 PM	#17
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Front view other side... __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 07:12 PM.

01-15-2004, 03:37 PM	#18
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	at least someone is making progress ! Looking good WES __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

01-15-2004, 03:40 PM	#19
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Very nice.....That BB will bring the front down for ya __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-15-2004, 04:01 PM	#20
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Looks great by why in Gods name would anybody delete their heater? Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

01-15-2004, 04:33 PM	#21
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Well I deleted the heater because I am going to install an "Old Air" A/C system. It comes complete with a heater... WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-15-2004, 04:40 PM	#22
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	I don't understand the need for A/C either? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

01-15-2004, 05:51 PM	#23
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Got to be cool on those 2 or 3 days that it gets up to 90 degrees here... LOL WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.