Truck load of Parts f/s axles, tranny...

[stelth2002]

Best Offers!


Gots lots of parts and less space. I have had these parts for quite a while, mostly left over from my 67. They are in good condition unless said so and i want to be fair in my prices. Anything else that you see in the pics are for sale too. I just missed it Ask me with any questions.
You can PM me or send me mail to jmartin@uidaho.edu

I have pics of some of these items. I will post some, email me for others.

Passenger side Ramhorn 2wd v8 manifold(has been repair welded and doesnt leak) 15$
9 inch tailhousing & tailshaft for a t350 (good shape) 25$
Factory Intake off a 292. Has good carb studs and doesnt have any cracks. Sealed good. SOLD
Factory Tire jack(works, but is without handle, has surface rust) SOLD
2 67-68 Aluminum Grill loops. (If buffed out these would exceed a daily driver, Has one noticable dent in the middle by the chevy emblem) SOLD
1 set of 3 point mirrors ( has good glass, some surface rust) 15$
1 - Firewall Heater box from a non-ac truck(goes by the engine and includes fan, all was working great) 50/complete/each
2 - 2wd steering boxes. (non-power, worked, had some play, will include good pitman arm) 20$
3 gauge clusters ( 1 nice one(everyting works and looks good) 1 works and and one has a good speedo/gas/oil) SOLD
2 - windsheild wiper assemblies(includes the wiper arm and blade, worked and look great) 20/set
67-68 ebrake setup for cab. Includes everything you need to mount it under steering wheel, works $30
2 taillight housing (doesnt include the wiring) 10/set
1 set of door hinges 15/set
1 washer bottle and bracket and lid 7
Flywheel cover for automatic SOLD
Starter cover 5$
GMC horn cover(aluminum, good shape, no scraches) 10$
Heater control ( 1 broken lever, aluminum face, tight) 20$
1 12 bolt coil spring rear end (believed 3.73, possibly posi, drum to drum) open price SOLD
SM465 tranny (worked great with clutch below, includes x member, etc) 100$
Start for manual bellhousing. Been siting, worked, couldnt use when i converted tranies 15$
Clutch 11" complete. used 100miles. LOOKs EXCELL SOLD
Flywheel for SBC except 400. (got lots of metal to it, not turned, new. Has 100miles on it) 75$ / Best offer?
Also engine cover for 92 -98 6.5 diesel GM. Cant use since i did some mods to my engine. LOOKS new, not broke, good rubber and bolts ebay= 90$ here =SOLD
Wiring harness off a 72 chevy (inside, pic) SOLD
hugger orange glove box door( driver quality) 15$


Give me offers, i need go get this gone to pay for truck and college THANKS JT

[stelth2002]

pic

[stelth2002]

or

[stelth2002]

more

[stelth2002]

last

[J.Lance]

What year cab is that? Is it for sale? If so, condition and how much. Where at in Id.? Thanks.

Jason

[stelth2002]

The cab is a 72 year cab. The cab driver floor needs replaced as well as all the rocker stuff. Thewindsheild gasket also has some rust on the passenger bottom corner. Its repairable, but i havent looked at it close. If you buy the cab ill also leave the wiring harness and heater box in it if you want. Hows 100$. Right now the cab is right close to twin falls, ID Since your in CO i might be able to take it close to pocatello. I hav attached a picture showing where the rust is at. The rear glass and passenger door glass is good btw.

[J.Lance]

Thanks for the info. Honestly, I was hoping that it might have been a clean '68 cab but couldn't tell by the pics. I already have a '71 cab in need of all that stuff so I'll have to pass. Thanks again. Twin Falls huh? Got hit by a wicked dust storm there last August on my way back from my parents house in Weiser. We were eating at the Chilis there in town and when we were walking back to the car we just saw this solid wall of crap coming down the Snake river canyon. We ran to the car but didn't quite make it in the door before it hit. It was pretty wild and threw us all of the place in my burb with the car trailer on our way back to the highway. Had to do 90 to outrun it! Thanks again.

Jason

[67sss]

That stuff looks like what we saw on the way to sledding. We were there about a month ago and I saw all this on the right side of the hwy by a dune buggy/ sand rail. Is that where it is?.........

whats the letters and the #'s on the rearend? could use a extra 3:73 posi if it is that.

[MIDSTATE 67-72]

let me know what shipping would be on the aluminum grill trim....thanks....mike

[daves71k5]

Stealth2002;
What kind of shape is the pass. door, is it a true 72 door? What do you want for it? I am about 1 hr from Twin Falls so I could pick it up pretty easy if it's in good shape. Just let me know.
thanks Dave

[stelth2002]

I have replied to everyone that has inquired. The rear end is currently quite aways from me and thats why i put the low price on it. Its complete and i cant find out the number for it. Im almost positive that its ratio is 3.73. I also believe it has a posi, but im selling it cheap cause im unable to look at it right now. Thanks and if theres a question then ask! Thanks JT

[padreisla]

Hey stelth2002, do you still have an aluminum 67 grill for sale. It is all 4 pieces. Also I saw a chrome front bumper in one of your pictures, is it for sale? If so how much and what kind of condition, also do you have a rear one? Can you let me know, also shipping to 33617.

Thanks...Joey

[dalejr8]

can I send you 10 more dollars to send me that automatic cover?

[stelth2002]

Ok, ive sold the auto tranny cover. Still have the starter cover. I also sold all the dashes. Ask about anything else. Thanks JT

[botboy]

I need the plate underneath the spring that bolts to the traction bar and is the lower shock support/mount, for the drivers side if you are willing to sell. Do you have paypal? lmk botboy60 (at) hotmail.com. Thanks

[stelth2002]

I have also sold the grill trim rings. botboy you have a PM. Anyone else?

[terrym1]

hi stelth2002 we talked the other day and you said you might have a passenger side fender for a 67 just wondering if you found out yet thanks terrym1

[stelth2002]

Ive sent out replies to everyone. If you have any more questions then ask away. Thanks JT

[stelth2002]

Brake for 67-68 sold also. ttt

[stelth2002]

anyone else... give me offers on it

[MIDSTATE 67-72]

stelth....sent you a money order for the 67-68 grill trim awhile back and havent heard from you....let me know if you have got it and have sent parts

[67ChevyC10Stepside]

if that rear is 373 posi for sure i want it! i want the cab too..what about them doors? pm me back and lets see what we can make happen

[stelth2002]

PM sent and list updated mostly with what has sold. Anyone else?

[botboy]

Got my parts in a timely manner, very satisfied with seller.

BTW: Didn't notice the SM465 first time around, is it 2WD? Is that $100 shipped? If not how much to ship to 55328? Thanks.