Video info and prices........ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ebfabman · 01-22-2004, 10:00 PM

Ok, after some serious thought I have come up with what I think is a very fair price for the videos. I think about $40 per hour of instructional video is a fair price. Even if someone is not going to do the work themselves, They could show a shop how they want the work done and if the shop can't or won't do it like the videos show, keep looking for a shop that can and will. This alone should be worth the price of the videos.
Anyway, I have just under three hours of videos that cover the typical rust on the pick up cab. Rust cut out, front floor ,rear floor, lower door jam, front and rear cab supports, rocker, cab corner, and some other areas.
At this time approximately three hours of DVD will be $99, and about three hours VHS tape $99. This wiil be an introductory offer price for board members.

Address is
P.O. Box 5454
Concord, NC
28027

I have a lot of time and money in this project, so it will take selling quite a few of these to recoup my investment, however if it is alright with Josh, I would like to make a $3 per order donation to the board until I start making a profit , Then maybe at that time become a paying advertiser to this board.
Thanks.........eb

__________________

**BOSS** · 01-22-2004, 10:23 PM

Do you take paypal yet?How many videos are you planning on all togeher?

go-fast69 · 01-22-2004, 10:51 PM

sent you a PM

*racedvl* · 01-22-2004, 10:51 PM

PayPal?!?!

Alexis · 01-22-2004, 11:01 PM

what the other guys just said except gofast69

ebfabman · 01-22-2004, 11:11 PM

No pay pal yet , but I can see I should do it . I'll see about setting up a pay pal account tomorrow. Otherwise I would suggest a U.S. postal money order.

go-fast69, yes they show installment all the replacement rust repair panels, everything is complete metal finish, I don't use ANY bondo.

ebfabman · 01-22-2004, 11:29 PM

Purpleslammed69, I also have frame shortening, repairing a door (inner and outer shell) filling a fuel filler hole (this one includes some welding and metal finishing technique) also an "A" pillar replacement ( this one is the complete "A" pillar from roof to rocker) and a rusty cowl repair (covers the inner and outer cowl including the vents area.

crazy4chevs · 01-22-2004, 11:40 PM

sounds great, now Ive got to make some extra cash.

GMC69 · 01-22-2004, 11:45 PM

When you get a paypal account setup let me know.

Also what about shipping one to Canada?? There must be an easy way to get it here without me having to pay duty and all that extra $$ on them. Paying shipping I have no problem with since they are light, but duty and extra tazes would almost double the cost for me especially with exchange rate.

Let me know

DMAN · 01-23-2004, 12:23 AM

p.m.'d you.

Patrick

Suicide-D · 01-23-2004, 01:10 AM

I'm in... and it couldn't have come at a better time!! Day after Pay day!, that and I'm about to start the floor,rocker, cab support, corner replacement... I'll wait on the pay pal too...

GMC69 · 01-23-2004, 01:14 AM

I'm going to keep any question I have in this post and not in a PM in case another member has the same question so you only have to answer it once.

If shipping to Canada is a problem I can give you an address in the U.S. and he can bring it to me in March when he comes up for one of our car meets. And still pay you through paypal.

ebfabman · 01-23-2004, 01:24 AM

GMC69, I've never shipped to Canada so I'm not familar with all the particulars, but I will work with you in any way I can. Just let me know. I won't have an answer on paypal til maybe tomorrow.

Stroker · 01-23-2004, 01:27 AM

Just a few quick questions. Are your repairs done using MIG or TIG welding? Do you have the DVDs available now? If so how do you prefer to be contacted for orders? email, PMs, your website, this tread, ect? Thanks Stroker

GMC69 · 01-23-2004, 01:30 AM

Quote:

Originally posted by ebfabman
GMC69, I've never shipped to Canada so I'm not familar with all the particulars, but I will work with you in any way I can. Just let me know. I won't have an answer on paypal til maybe tomorrow.

I have just PM'ed him through the other car forum and will get an answer from him. I think that is going to be the easiest for you, I don't wan't to complicate anobodies life here to get the video's over here, only big problem I can see is being patient waiting for them.

ebfabman · 01-23-2004, 01:34 AM

Stroker, everything is mig welded. DVD's now. Use the P.O. box to order at

P.O. Box 5454
Concord, NC
28027

CG · 01-23-2004, 01:35 AM

ive been wanting to learn to weld. are these videos for beginners? do you cover the kinds of welders that are used? i would pony up for the whole set if you think i can use them and hit the ground running

GMC69 · 01-23-2004, 01:36 AM

I guess once paypal is setup we can simply PM you the shipping info and pay through paypal? I know pretty stupid question but just confirming.

ebfabman · 01-23-2004, 01:44 AM

CG, While these are not "how to weld" videos, if you can tack weld sheet metal with a mig welder you could use these videos as a guide to repair 67-72 chevy and GMC trucks and use the same techniques to repair any vehicle that uses sheet metal as panels. Of course if you are not a good welder, just start practicing til you are comfortable with your welding before cutting on a prized possession.

GMC69 · 01-23-2004, 01:48 AM

I am hoping that I can learn enough to get the confidence to get a mig welder and learn. Then I can patch my cab instead of buying a new /used one.

ebfabman · 01-23-2004, 01:56 AM

I guess once paypal is setup we can simply PM you the shipping info and pay through paypal? I know pretty stupid question but just confirming

Yes, that sounds good. I guess if people are using paypal the PO Box isn't necessary. (sorry I didn't think of that) If you have any other questions just post them here. I'll keep a check daily.

bigjimzlll · 01-23-2004, 02:34 AM

you can set up a paypal account on line in ten minutes any time..it dont cost anything..its easy

meathead95 · 01-23-2004, 11:13 AM

ill be waiting for paypal also

kxmotox247 · 01-23-2004, 02:00 PM

Yep...
As soon as you get a paypal account, let us all know. I think I'll order a set of dvd's.
At least with paypal, you'll have your money instantly...no waiting on cashing checks.
Thanks in advance!
Josh

Jwill41 · 01-23-2004, 02:11 PM

I think I want it too. Hurry up with the paypal account.

01-22-2004, 10:00 PM	#1
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	Video info and prices........ Ok, after some serious thought I have come up with what I think is a very fair price for the videos. I think about $40 per hour of instructional video is a fair price. Even if someone is not going to do the work themselves, They could show a shop how they want the work done and if the shop can't or won't do it like the videos show, keep looking for a shop that can and will. This alone should be worth the price of the videos. Anyway, I have just under three hours of videos that cover the typical rust on the pick up cab. Rust cut out, front floor ,rear floor, lower door jam, front and rear cab supports, rocker, cab corner, and some other areas. At this time approximately three hours of DVD will be $99, and about three hours VHS tape $99. This wiil be an introductory offer price for board members. Address is P.O. Box 5454 Concord, NC 28027 I have a lot of time and money in this project, so it will take selling quite a few of these to recoup my investment, however if it is alright with Josh, I would like to make a $3 per order donation to the board until I start making a profit , Then maybe at that time become a paying advertiser to this board. Thanks.........eb __________________

01-22-2004, 10:23 PM	#2
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Do you take paypal yet?How many videos are you planning on all togeher? __________________ Support our site Norwood Survivor

01-22-2004, 10:51 PM	#3
go-fast69 Registered User Join Date: Apr 2002 Location: North Platte, NE Posts: 50	sent you a PM __________________ 69 swb GMC, 402 BB, 3:73 posi, 3" exhaust, forever a work in progress

01-22-2004, 11:40 PM	#8
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	sounds great, now Ive got to make some extra cash. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

01-22-2004, 11:45 PM	#9
GMC69 Registered User Join Date: Jul 2003 Location: Sudbury, Ontario, Canada Posts: 734	When you get a paypal account setup let me know. Also what about shipping one to Canada?? There must be an easy way to get it here without me having to pay duty and all that extra $$ on them. Paying shipping I have no problem with since they are light, but duty and extra tazes would almost double the cost for me especially with exchange rate. Let me know __________________ Mike Email: Click here to email me -- 2019 Silvedrado 4x4 1970 Chevy 3/4 ton, 396BB, on air bags

01-22-2004, 10:51 PM	#4
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	PayPal?!?!

01-22-2004, 11:01 PM	#5
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	what the other guys just said except gofast69

01-22-2004, 11:11 PM	#6
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	No pay pal yet , but I can see I should do it . I'll see about setting up a pay pal account tomorrow. Otherwise I would suggest a U.S. postal money order. go-fast69, yes they show installment all the replacement rust repair panels, everything is complete metal finish, I don't use ANY bondo.

01-22-2004, 11:29 PM	#7
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	Purpleslammed69, I also have frame shortening, repairing a door (inner and outer shell) filling a fuel filler hole (this one includes some welding and metal finishing technique) also an "A" pillar replacement ( this one is the complete "A" pillar from roof to rocker) and a rusty cowl repair (covers the inner and outer cowl including the vents area.

01-23-2004, 12:23 AM	#10
DMAN Registered User Join Date: May 2002 Location: Benicia,Ca. Posts: 128	p.m.'d you. Patrick __________________ '71 Custom Deluxe K10, shortbed, fleetside.

01-23-2004, 01:10 AM	#11
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	I'm in... and it couldn't have come at a better time!! Day after Pay day!, that and I'm about to start the floor,rocker, cab support, corner replacement... I'll wait on the pay pal too... Last edited by Suicide-D; 01-23-2004 at 01:16 AM.

01-23-2004, 01:14 AM	#12
GMC69 Registered User Join Date: Jul 2003 Location: Sudbury, Ontario, Canada Posts: 734	I'm going to keep any question I have in this post and not in a PM in case another member has the same question so you only have to answer it once. If shipping to Canada is a problem I can give you an address in the U.S. and he can bring it to me in March when he comes up for one of our car meets. And still pay you through paypal. __________________ Mike Email: Click here to email me -- 2019 Silvedrado 4x4 1970 Chevy 3/4 ton, 396BB, on air bags

01-23-2004, 01:24 AM	#13
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	GMC69, I've never shipped to Canada so I'm not familar with all the particulars, but I will work with you in any way I can. Just let me know. I won't have an answer on paypal til maybe tomorrow.

01-23-2004, 01:27 AM	#14
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	Just a few quick questions. Are your repairs done using MIG or TIG welding? Do you have the DVDs available now? If so how do you prefer to be contacted for orders? email, PMs, your website, this tread, ect? Thanks Stroker __________________ 72 SWB parts and pieces Oklahoma

01-23-2004, 01:34 AM	#16
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	Stroker, everything is mig welded. DVD's now. Use the P.O. box to order at P.O. Box 5454 Concord, NC 28027



Register or Log In To remove these advertisements.

01-23-2004, 01:35 AM	#17
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	ive been wanting to learn to weld. are these videos for beginners? do you cover the kinds of welders that are used? i would pony up for the whole set if you think i can use them and hit the ground running

01-23-2004, 01:36 AM	#18
GMC69 Registered User Join Date: Jul 2003 Location: Sudbury, Ontario, Canada Posts: 734	I guess once paypal is setup we can simply PM you the shipping info and pay through paypal? I know pretty stupid question but just confirming. __________________ Mike Email: Click here to email me -- 2019 Silvedrado 4x4 1970 Chevy 3/4 ton, 396BB, on air bags

01-23-2004, 01:44 AM	#19
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	CG, While these are not "how to weld" videos, if you can tack weld sheet metal with a mig welder you could use these videos as a guide to repair 67-72 chevy and GMC trucks and use the same techniques to repair any vehicle that uses sheet metal as panels. Of course if you are not a good welder, just start practicing til you are comfortable with your welding before cutting on a prized possession. Last edited by ebfabman; 01-23-2004 at 01:57 AM.

01-23-2004, 01:48 AM	#20
GMC69 Registered User Join Date: Jul 2003 Location: Sudbury, Ontario, Canada Posts: 734	I am hoping that I can learn enough to get the confidence to get a mig welder and learn. Then I can patch my cab instead of buying a new /used one. __________________ Mike Email: Click here to email me -- 2019 Silvedrado 4x4 1970 Chevy 3/4 ton, 396BB, on air bags

01-23-2004, 01:56 AM	#21
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	I guess once paypal is setup we can simply PM you the shipping info and pay through paypal? I know pretty stupid question but just confirming Yes, that sounds good. I guess if people are using paypal the PO Box isn't necessary. (sorry I didn't think of that) If you have any other questions just post them here. I'll keep a check daily.

01-23-2004, 02:34 AM	#22
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	you can set up a paypal account on line in ten minutes any time..it dont cost anything..its easy __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

01-23-2004, 11:13 AM	#23
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	ill be waiting for paypal also __________________ 72 2wd blazer 72 swb 4x4

01-23-2004, 02:00 PM	#24
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	Yep... As soon as you get a paypal account, let us all know. I think I'll order a set of dvd's. At least with paypal, you'll have your money instantly...no waiting on cashing checks. Thanks in advance! Josh __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

01-23-2004, 02:11 PM	#25
Jwill41 Registered User Join Date: Aug 2002 Location: Farmers Branch, Tx Posts: 1,009	I think I want it too. Hurry up with the paypal account. __________________ http://www.picturetrail.com/jwill41 67 1/2 ton GMC short step side 68 1/2 ton Chevy long fleet side 72 1/2 ton Chevy Suburban 99 1/2 ton Chevy Suburban founder (and only member) of the primer/clearcoat club

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.