![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2002
Location: Baton Rouge, Louisiana
Posts: 71
|
shock mount
I'm rebuilding the front end on my 1/2 ton Suburban. The top of the shock rides on a stud and is held in place by a washer that is held in place by some kind of funky crimp. How do I get it off, and how do I mount the new shock?
Thanks, Bryan |
![]() |
![]() |
![]() |
#2 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
I got some upper shock mount's from les schwab tire's here in oregon it's just a stud with a bolt on it to mount it threw the frame... If you don't find a set I may have a pair around here some where..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2002
Location: Newport News, VA
Posts: 190
|
I have replaced the upper shock mounts on the 71 and they were held in place by a bolt and lock washer located on the inside of the frame rail... Do you have a pic of this setup so we can see what this "funky crimp" is all about and figure out how to get it out?
7T1BURB |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2002
Location: Baton Rouge, Louisiana
Posts: 71
|
shock mount pic
here's a pic
|
![]() |
![]() |
![]() |
#5 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
WOW those shock's must be guaranteed for the life of the truck LOL... Here;s a pic of my set-up I thought I had an extra set around here but I could not find em...
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#6 |
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
someone lost the nut for your mount and welded a washer to it. It should have a nut on it. You're gonna have to cut it off and then get a new set of shock mounts. I might have one but not a pair. Someone here can help I'm sure.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,980
|
It's an original shock bolt that came w/the shock. Most shocks just come w/new hardware that you swap out when replacing the shocks. The newer (more recent) shocks you can buy now are threaded on both ends so you can just pull the shock off the stud & not have to worry about removing the entire stud. The older ones had threads on the frame end & that spotwelded washer on the other.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#8 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
It may well be the original shock.
I have no reason to believe that the ones on the longhorn were ever chainged out (being the back ones are rusted up prety bad) These are not quite the same as yours, but also a perminant style mount. |
![]() |
![]() |
![]() |
#9 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Most new shocks come with new upper studs in the box too. I have several sets of them from previous trucks. If you need them, just pay for shipping and I'll send them.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#10 |
70 Chevy 3/4t
Join Date: Sep 2000
Location: Kokomo,IN USA
Posts: 1,230
|
If you buy new shocks, new studs should be in the box with them.
__________________
Find a job you love and you'll never have to work a day in your life. 1998 Yamaha V-Star 650 1970 Chevy 3/4t, I6 (rebuilt), 4 speed Kokomo,IN |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Mar 2002
Location: Baton Rouge, Louisiana
Posts: 71
|
shock mount
Thanks for the replies.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|