Went back to the track (Much Better) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 01-31-2004, 11:32 PM

I had posted that my 3.73's and posi didn't help much but I think they helped. I readjusted the valves and found that they were backing off So I rigged it for now! I also foun that my Cheater Slicks were TOAST! I had cord showing on 1 (from before the posi) I went and bought a set of sportsman pro's 28X12! I had a much better 60ft and eight mile ET's! My best 60 ft was 1.97 and my best eighth mile 8.83 at 78.43 mph!!!!!!!!!!!!!!! That's more like what I had expected to gain.

As a side note I weighed it! It weighed 3806 with out the 210lbs driver!

*1972C10* · 01-31-2004, 11:41 PM

Pretty good time Mild engine? Stall convertor?

djracer · 01-31-2004, 11:58 PM

flat top vortec 350 basically a ZZ4 Clone with Vortec heads and a small stall about 2500

*1972C10* · 02-01-2004, 12:40 AM

Sounds like you've got a good combo going And getting good results

Just noticed you said you got a 3800 pound truck

I weighed my truck the other day SWB it wieghed out at 3660

Yours a LWB ?

djracer · 02-01-2004, 01:21 AM

No its a short bed fleetside! I weighed it at the track! Its an air truck without a compressor!

djracer · 02-01-2004, 09:13 AM

ttt

383 Stroker · 02-01-2004, 11:51 AM

Sounds like you have it running good. Did you run the 1/4 this time?

djracer · 02-01-2004, 05:04 PM

They didn't have the clocks set up for 1/4 mile. I was going to try to go today and make a 1/4 mile pass but I had honey do's out my @ss! Maybe next Sunday!

01-31-2004, 11:32 PM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Went back to the track (Much Better) I had posted that my 3.73's and posi didn't help much but I think they helped. I readjusted the valves and found that they were backing off So I rigged it for now! I also foun that my Cheater Slicks were TOAST! I had cord showing on 1 (from before the posi) I went and bought a set of sportsman pro's 28X12! I had a much better 60ft and eight mile ET's! My best 60 ft was 1.97 and my best eighth mile 8.83 at 78.43 mph!!!!!!!!!!!!!!! That's more like what I had expected to gain. As a side note I weighed it! It weighed 3806 with out the 210lbs driver! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-31-2004, 11:58 PM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	flat top vortec 350 basically a ZZ4 Clone with Vortec heads and a small stall about 2500 __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-01-2004, 12:40 AM	#4
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Sounds like you've got a good combo going And getting good results Just noticed you said you got a 3800 pound truck I weighed my truck the other day SWB it wieghed out at 3660 Yours a LWB ? Last edited by 1972C10; 02-01-2004 at 01:09 AM.

02-01-2004, 01:21 AM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	No its a short bed fleetside! I weighed it at the track! Its an air truck without a compressor! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-01-2004, 09:13 AM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	ttt __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-31-2004, 11:41 PM	#2
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Pretty good time Mild engine? Stall convertor?

02-01-2004, 11:51 AM	#7
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	Sounds like you have it running good. Did you run the 1/4 this time? __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

02-01-2004, 05:04 PM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	They didn't have the clocks set up for 1/4 mile. I was going to try to go today and make a 1/4 mile pass but I had honey do's out my @ss! Maybe next Sunday! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.