does anyone make bolt in bag cups?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ucmydust68 · 02-01-2004, 01:52 PM

well i got all my front suspension done and i put the wheels back on and remembering its still just a frame and i still have an engine and sheetmetal to go on. i measured the height, the crossmember sits 4 3/4 inches from the ground. so im gonna bag the front, im looking at innovative air suspension front cups, are they weld in or bolt in. i really dont want to weld in anything and ruin my nice painted finish. any advice???
thanks again yall
chris

REPO1 · 02-01-2004, 03:01 PM

Just give them a call. They are pretty helpful. Their website doesn't show a picture though. They really need to do some updating on it.

phantom dually · 02-01-2004, 04:58 PM

here is a link I have a set on ebay!! http://67-72chevytrucks.com/vboard/s...threadid=88226

fastbagged68 · 02-01-2004, 06:19 PM

You can run top plate too. You could make it yourself, and bolt it in. Also you never want to weld in upper cups! how would you ever get the bag out? I have installed bags on more then 20 cars and never welded in cups.

ucmydust68 · 02-01-2004, 06:22 PM

ok i ordered some brackets and some bags for the rear from kpkomponents, now i just need to know what all i need other than bags and brackets,

i have a compressor
could anyone give me a list of what valves, how much line, etc that i need, please, its so fricken cold out and im stir crazy need to buy something.
thanks again
chris

PrimeredThunder · 02-03-2004, 01:31 AM

SMC makes a good 3/8 valve that usually run $35 a piece. You can run either 4 or 8, depending if you want F/B or F/B/S/S.

How much line you need depends on where and how you mount your tank, compressor, valves and bags. So its more of a buy as you go, I'd get 25ft and go from there.

Remember you need a Supply Tank, Pressure Switch, Switches as well. It's fun once you get it done, I love my Airbags, even though it took a while to get it just the wy I wanted it.

have fun..wish I had extra money to spend like that

Kenny

02-01-2004, 01:52 PM	#1
ucmydust68 fuel Join Date: Jul 2003 Location: belton mo Posts: 371	does anyone make bolt in bag cups?? well i got all my front suspension done and i put the wheels back on and remembering its still just a frame and i still have an engine and sheetmetal to go on. i measured the height, the crossmember sits 4 3/4 inches from the ground. so im gonna bag the front, im looking at innovative air suspension front cups, are they weld in or bolt in. i really dont want to weld in anything and ruin my nice painted finish. any advice??? thanks again yall chris

02-01-2004, 03:01 PM	#2
REPO1 Shortbox wanna-be. Join Date: Mar 2002 Location: Fort St.John, British Columbia, Canada Posts: 773	Just give them a call. They are pretty helpful. Their website doesn't show a picture though. They really need to do some updating on it. __________________ 1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH)

02-01-2004, 04:58 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	here is a link I have a set on ebay!! http://67-72chevytrucks.com/vboard/s...threadid=88226 __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-03-2004, 01:31 AM	#6
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	SMC makes a good 3/8 valve that usually run $35 a piece. You can run either 4 or 8, depending if you want F/B or F/B/S/S. How much line you need depends on where and how you mount your tank, compressor, valves and bags. So its more of a buy as you go, I'd get 25ft and go from there. Remember you need a Supply Tank, Pressure Switch, Switches as well. It's fun once you get it done, I love my Airbags, even though it took a while to get it just the wy I wanted it. have fun..wish I had extra money to spend like that Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-01-2004, 06:19 PM	#4
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	You can run top plate too. You could make it yourself, and bolt it in. Also you never want to weld in upper cups! how would you ever get the bag out? I have installed bags on more then 20 cars and never welded in cups.

02-01-2004, 06:22 PM	#5
ucmydust68 fuel Join Date: Jul 2003 Location: belton mo Posts: 371	ok i ordered some brackets and some bags for the rear from kpkomponents, now i just need to know what all i need other than bags and brackets, i have a compressor could anyone give me a list of what valves, how much line, etc that i need, please, its so fricken cold out and im stir crazy need to buy something. thanks again chris



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.