cheap coil swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dregs454 · 02-05-2004, 01:58 AM

Hey guys, I have a 3/4 ton truck with 4 old bouncy coils. I was wondering if I could find a newer 1/2 ton and use its coils, and improve my ride, and maybe even drop down an inch?? I'm workin on a college budget here, so new drop coils are outta the question. Is there any kind of truck that would have coils that would work good? I guess I could also cut a coil outta the front, that is my second option. Any ideas?????

thanks

dregs454 · 02-05-2004, 06:30 PM

maybe would some full size car coils work? help me out guys~!

70short/step · 02-07-2004, 01:17 PM

I had a 62 chevy truck that had stiff old springs in the rear and it drove like a truck!! Was high in the back too! I went to Pick~n~Pull and found a mid 70s GM car, (Olds Cutlass I think) with coils and for 10 bucks had a Great riding truck that was lowered real nice too!
Good Luck! 70short/step

dregs454 · 02-08-2004, 03:09 PM

thanks 70/short! I'm gonna go check out the bone yard for some good coil candidates

steve

02-05-2004, 01:58 AM	#1
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	cheap coil swap Hey guys, I have a 3/4 ton truck with 4 old bouncy coils. I was wondering if I could find a newer 1/2 ton and use its coils, and improve my ride, and maybe even drop down an inch?? I'm workin on a college budget here, so new drop coils are outta the question. Is there any kind of truck that would have coils that would work good? I guess I could also cut a coil outta the front, that is my second option. Any ideas????? thanks __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

02-05-2004, 06:30 PM	#2
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	maybe would some full size car coils work? help me out guys~! __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

02-08-2004, 03:09 PM	#4
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	thanks 70/short! I'm gonna go check out the bone yard for some good coil candidates steve __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-07-2004, 01:17 PM	#3
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	I had a 62 chevy truck that had stiff old springs in the rear and it drove like a truck!! Was high in the back too! I went to Pick~n~Pull and found a mid 70s GM car, (Olds Cutlass I think) with coils and for 10 bucks had a Great riding truck that was lowered real nice too! Good Luck! 70short/step



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.