![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Feb 2004
Location: Ponca city now kingfisher Oklahoma
Posts: 1,221
|
Are the arms all the same on 67-72's?
I'm looking at changing out the front spindles and rebuilding the front end on my 68. I have a complete 72 front end I have disassembled. Can I use the original a arms or not? Did they change once they went to 71? And are 1/2 ton and 3/4 ton's the same?
|
![]() |
![]() |
![]() |
#2 |
Try spinnin 4 rear tars
Join Date: Sep 2003
Location: Salt Lake City, Utah
Posts: 757
|
The lower ball joints are different on the 71-72 than on the 67-70. Since you have the 'whole' front end, why not just swap all of the arms...
__________________
SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Feb 2004
Location: Ponca city now kingfisher Oklahoma
Posts: 1,221
|
okay but in the future on other trucks could I use the same a arms and just change out the spindles or not??
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|