|
|
|
02-28-2004, 11:09 PM
|
#1 |
|
Registered User
Join Date: Jan 2004
Location: Farmersville, TX - Northeast of Dallas
Posts: 56
|
Scary Ride!!!
While on my way home this evening I was driving along at about 45 when my truck decided it wanted to be sideways. By the grace of God no one hit me but it sure was an interesting ride.
It was dark but it looks like one of the u-bolts holding the right lower control arm broke. I just wanted to know if this is a common problem and if there is anything in particular that I should be looking at in the way of collateral damage? Is the shaft likely to be toast now? I sure don't want this to happen again so I guess I will go ahead a replace all of the u-bolts. BTW, I am pretty new to the board but have gotten alot of good info from you guys already. Glad you are here. My truck is a 67 LWB 1/2 ton Fleetside. Needs alot of work but has been fun so far. |
|
|
|
02-28-2004, 11:31 PM
|
#2 |
|
Registered User
Join Date: Jan 2003
Location: Washington State
Posts: 8,834
|
Sounds scary.....haven't heard of this happening before....but I'll bet mine gets a better look over.......
__________________
1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo |
|
|
|
|
02-28-2004, 11:42 PM
|
#3 |
|
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
This same problem came up a couple weeks ago, happened to another board member.
|
|
|
|
|
02-28-2004, 11:46 PM
|
#4 |
|
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
|
|
|
|
|
02-29-2004, 12:21 AM
|
#5 |
|
Registered User
Join Date: May 2001
Location: Bethlehem, GA, USA
Posts: 389
|
breakage
I had this happen to me at the race track. I figured it was just from to many ups and downs with the front tires. Metal fatigues so I suggest that everybody replace all fo these. It's not like it is difficult or expensive.
Tom
__________________
No more dragtruck for me. I'm building a new ride though. It's a '71 fleetside, 400 sbc, 700R4. Working on it now, finally. Soon to have Edelbrock Pro Flo EFI, Vintage Air, 1 piece windows, buddy buckets, etc. My new build thread: http://67-72chevytrucks.com/vboard/s...17#post2861817 Best pass with the old dragtruck: 5.32 @ 131.6 mph 1/8 mile w/ a 1.25 60' Fogger/Plate 2003 Best pass with the street 406 hydraulic roller motor w/ mild plate tuneup 5.93 @ 114 mph 1/8 mile w/ a 1.29 60' 2003 or 2004 |
|
|
|
|
02-29-2004, 01:25 AM
|
#6 |
|
Try spinnin 4 rear tars
Join Date: Sep 2003
Location: Salt Lake City, Utah
Posts: 757
|
Dang, never heard of this before
 Now I'm afraid to drive my truck, I'm pretty sure that mine are the original set. I know what I will be doing over spring break...
__________________
SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB |
|
|
|
|
02-29-2004, 01:27 AM
|
#7 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Pretty odd being that you ar in a fairly rust free area.
|
|
|
|
|
02-29-2004, 03:19 AM
|
#8 |
|
" SHOW ME"
Join Date: Jan 2003
Location: shelbyville illinois
Posts: 2,624
|
its happened to me before but luckily i wasnt going in a heavily populated area , mine just snapped and dumped the a$$end in the dirt , actually my trailing arm snapped in to and folded out , ever have that happen ? , like i said i was fine adn the body never got hurt, you know these get over looked alot , you wouldnt believe th number of trucks i have seen that were being driven that had 3 out of 4 u bolts rusted clear through , i told the people about them that were driving them , its a more common problem than you hink it just gets overlooked alot
|
|
|
|
|
02-29-2004, 12:44 PM
|
#9 |
|
PROJECT 7DEUCE
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Never had that happen but I got some new one's with the front end rebuild kit MY WIFE BOUGHT..
__________________
GO BIG GREEN  GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
02-29-2004, 10:28 PM
|
#10 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,031
|
Man that sucks. Hope you get it back together quickly. That 9/16's u-bolt upgrade kit mentioned in the attached link sounds like a good investment.
BTW.... welcome from Garland (& my parents live in Nevada Tx.).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
