![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Mar 2004
Location: B.F.E. Indiana
Posts: 92
|
need to know where them go?
bought a truck w/o a motor and when they took it out they cut out all the wiring got it all rewired but the alternator.. i know where the big wire goes but where do the 2 little wires go?..need help thanks
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,906
|
there should be wiring schematics in the repair manual.
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
![]() |
![]() |
![]() |
#3 |
You get what you pay for
![]() Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
As you may have it, the big red wire on the bat terminal goes to the junction block on the firewall. The small red wire in the spade connector goes to the hot post on the starter. The brown wire goes to the switch. The other end will probably be below the brake booster where all the wires go through the firewall.
__________________
Mike 1985 Chevy C-10 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|