Wanted: Inner fender patches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammed67 · 03-22-2004, 11:37 AM

Okay, this might be an impossible request, but I'll give it a try. I'm looking for (rust free) inner fender patches for the areas circled in red in the picture below (for both left and right inners). Mine are nice except for these areas so I'd rather fix these instead of buying new ones (the one pictured isn't mine). I thought maybe someone here had some inners from a wrecked truck or some that have rusty bottoms that they could cut up.

Thanks,

Jason

03glide · 03-22-2004, 11:41 AM

I have several hat are good in this area. How big of a patch do you want?

Slammed67 · 03-22-2004, 11:48 AM

Wow, that was quick!

Something like this would work.....

JimKshortstep4x4 · 03-22-2004, 02:05 PM

We end up making patches like that since every liner in Michigan is rusted out at that area. Those look good to me!

Jim

LT 72 Jimmy · 03-22-2004, 02:10 PM

Does or would anyone make a patch for the bottom edge under the battery?

sactoC10 · 03-22-2004, 04:04 PM

Sending you a PM, I could use a patch too, since someone went drill happy and put about a dozen holes in mine...don't have any pics yet though.

billsbowtie · 03-22-2004, 09:15 PM

i think i have some i will check if anyone else needs some

FRENCHBLUE72 · 03-23-2004, 09:24 AM

I also have a passenger side that I could cut up if anyone is needing it I also may have a driver's side..

03glide · 03-23-2004, 10:25 AM

10.00 plus shipping and I will cut any size patch you want. I wish you were closer you could have the whole inner fender for 10.
Brian

Slammed67 · 03-23-2004, 11:13 AM

Brian,

I need patches for both inner fenders maybe areas slightly larger than what I marked in the above picture. Wenever you get them cut out, PM me your address and total cost so I can send you the money.

Thanks again!

Jason

Slammed67 · 04-06-2004, 11:10 PM

TTT

Can somebody get these for me?? Let me know.

Jason

FRENCHBLUE72 · 04-06-2004, 11:39 PM

Slammed do you need those patch panne's for both inner fender's?? or just the driver's???

Slammed67 · 04-07-2004, 10:06 AM

I need them for both sides.

Thanks,

Jason

FRENCHBLUE72 · 04-07-2004, 08:53 PM

Jason how about 20 for both side's shipped to your door?? If ya got a driver's side door latch I would trade ya..

Slammed67 · 04-08-2004, 12:20 AM

PM sent.

Thanks,

Jason

03-22-2004, 11:37 AM	#1
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Wanted: Inner fender patches Okay, this might be an impossible request, but I'll give it a try. I'm looking for (rust free) inner fender patches for the areas circled in red in the picture below (for both left and right inners). Mine are nice except for these areas so I'd rather fix these instead of buying new ones (the one pictured isn't mine). I thought maybe someone here had some inners from a wrecked truck or some that have rusty bottoms that they could cut up. Thanks, Jason Attached Images __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

03-22-2004, 11:48 AM	#3
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Wow, that was quick! Something like this would work..... Attached Images __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

03-22-2004, 04:04 PM	#6
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,055	03glide Sending you a PM, I could use a patch too, since someone went drill happy and put about a dozen holes in mine...don't have any pics yet though.

03-22-2004, 09:15 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i think i have some i will check if anyone else needs some __________________ i have 67/72 chevy truck parts f/s.

03-23-2004, 09:24 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I also have a passenger side that I could cut up if anyone is needing it I also may have a driver's side.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-22-2004, 11:41 AM	#2
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	I have several hat are good in this area. How big of a patch do you want?

03-22-2004, 02:05 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	We end up making patches like that since every liner in Michigan is rusted out at that area. Those look good to me! Jim

03-22-2004, 02:10 PM	#5
LT 72 Jimmy Registered User Join Date: Sep 2002 Location: Arkansas Posts: 252	Does or would anyone make a patch for the bottom edge under the battery?

03-23-2004, 10:25 AM	#9
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	10.00 plus shipping and I will cut any size patch you want. I wish you were closer you could have the whole inner fender for 10. Brian

03-23-2004, 11:13 AM	#10
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Brian, I need patches for both inner fenders maybe areas slightly larger than what I marked in the above picture. Wenever you get them cut out, PM me your address and total cost so I can send you the money. Thanks again! Jason __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

04-06-2004, 11:10 PM	#11
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	TTT Can somebody get these for me?? Let me know. Jason __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

04-06-2004, 11:39 PM	#12
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Slammed do you need those patch panne's for both inner fender's?? or just the driver's??? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-07-2004, 10:06 AM	#13
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	I need them for both sides. Thanks, Jason __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

04-07-2004, 08:53 PM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Jason how about 20 for both side's shipped to your door?? If ya got a driver's side door latch I would trade ya.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-08-2004, 12:20 AM	#15
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	PM sent. Thanks, Jason __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.