1971 c10 stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big_al_71 · 09-20-2011, 02:58 PM

My best friend may be joining the c10 family. He is the type of guy that has to always be working on something so he found a 71 stepside with no motor or tranny. The truck is about an hour south of miami and it is in very good condition no rust anywhere according to him. hopefully he will go buy it up within the next week or so. If he gets it I will take some picts for everyone to see.
He is not going to go all out like he did with his camaro nor his jeep he is planning on putting a 383 stroker, air ride, steel wheels or maybe billet wheels he is not sure yet.

eightbanger · 09-20-2011, 04:29 PM

Body looks super clean.

big_al_71 · 09-24-2011, 09:56 AM

Well now I know that y best friend is serious about building a c10..Looking around in ebay this morning i came accross his car is on the auction block. Oh boy I hope he does not regret doing this...

http://cgi.ebay.com/ebaymotors/Chevr...item415da820b2

FRENCHBLUE72 · 09-24-2011, 01:44 PM

That is a great looking camaro...

Andy4639 · 09-24-2011, 02:07 PM

Al I hope your right! He better hope he really wants a truck to sell that Camaro!
That model isn't my first choice but his is one I would most defantenly would have.

OJ1988 · 09-24-2011, 02:10 PM

Great looking truck, and camaro!

70-73 are tops for me, my first car was a 71 camaro, that I still wish I had, of course. I would trade my truck for one in a heartbeat.

big_al_71 · 09-24-2011, 02:12 PM

Quote:

Originally Posted by OJ1988

Great looking truck, and camaro!

70-73 are tops for me, my first car was a 71 camaro, that I still wish I had, of course. I would trade my truck for one in a heartbeat.

I know he is willing to accept trades plus money for his camaro just saying...In fact he offered e a trade and money for my truck but I cant part with y truck so I offered him money for the camaro but we are 30k apart...

big_al_71 · 09-24-2011, 02:10 PM

Andy my friend enjoys building things rather than showing thme or even driving them he likes the feeling of accomplishment. We speak everyday in the phone and he is now teling me that he is going to put an LS engine in the truck air ride, leather interior I told him I thought you were going to go easy in this truck so much for that.

Andy4639 · 09-24-2011, 02:14 PM

From his Camaro build I can tell he will do us proud building the truck! He will like the truck even more than the camaro once he starts on it!

big_al_71 · 09-24-2011, 02:19 PM

Quote:

Originally Posted by Andy4639

From his Camaro build I can tell he will do us proud building the truck! He will like the truck even more than the camaro once he starts on it!

I agree. We have been friends for 25 years or so and he has built some serious vehicles over the years..

OJ1988 · 09-24-2011, 02:21 PM

It would take my truck and 30k for that camaro I am sure!

72BlckButy · 09-24-2011, 10:18 PM

Can't mention his jeep and not post a picture...

Glad to see we have a new relative.

big_al_71 · 09-24-2011, 10:50 PM

Quote:

Originally Posted by 72BlckButy

Can't mention his jeep and not post a picture...

Glad to see we have a new relative.

Here are a couple of picts. This jeep was bone stock six months ago and he sold it last week. someone saw it stopped him and bought in within a day.

72BlckButy · 09-24-2011, 10:51 PM

Now that's a Jeep....

Holy smokes!

And I have to ask... superflysteiny is a dentist, what does this guy do? Haha!

**70cst** · 09-24-2011, 10:57 PM

Very solid lookin truck and some serious rides

big_al_71 · 09-24-2011, 11:00 PM

Quote:

Originally Posted by 70cst

Very solid lookin truck and some serious rides

indeed he has built some serious vehicles over the years.

We have been texting and talking on the phone all day long today about his plans for the stepside.

I guess I will be the photographer and doing his build thread

Great thing is that he lives less than two miles from me so it should be easy to keep track.

big_al_71 · 09-24-2011, 10:58 PM

Quote:

Originally Posted by 72BlckButy

Now that's a Jeep....

Holy smokes!

And I have to ask... superflysteiny is a dentist, what does this guy do? Haha!

He works for Toyota as I do but at a different dealership....EVERYTHING is done by him in his garage not a shop but his house's garage...

He can do it al but paint is the only thing that is done outside his garage.

72BlckButy · 09-24-2011, 11:00 PM

He has some major skills.

I'll find it hard to believe that his stepper doesn't turn out amazing since his other cars/trucks are done and done right the first time.

**67cheby** · 09-24-2011, 11:01 PM

WOW...cant wait to see his truck build

big_al_71 · 09-24-2011, 11:07 PM

here are some picts of the jeep stock side by side with the camaro and a picture of the front finished.

Andy4639 · 09-25-2011, 09:55 AM

You would think he had enough cash if he sold that Jeep. But I don't blame him for selling the camaro either now after seeing his garage. He wants plenty of room so no one hits his truck!

big_al_71 · 09-25-2011, 11:46 AM

Quote:

Originally Posted by Andy4639

You would think he had enough cash if he sold that Jeep. But I don't blame him for selling the camaro either now after seeing his garage. He wants plenty of room so no one hits his truck!

he did very well on the jeep......

Andy4639 · 09-25-2011, 12:43 PM

Quote:

Originally Posted by big_al_71

he did very well on the jeep......

Hopefully he will do as well on the Camaro!

**67cheby** · 09-29-2011, 09:34 PM

nice

big_al_71 · 09-29-2011, 09:44 PM

here are a few more picts...

09-20-2011, 02:58 PM	#1
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	1971 c10 stepside My best friend may be joining the c10 family. He is the type of guy that has to always be working on something so he found a 71 stepside with no motor or tranny. The truck is about an hour south of miami and it is in very good condition no rust anywhere according to him. hopefully he will go buy it up within the next week or so. If he gets it I will take some picts for everyone to see. He is not going to go all out like he did with his camaro nor his jeep he is planning on putting a 383 stroker, air ride, steel wheels or maybe billet wheels he is not sure yet. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-20-2011, 04:29 PM	#2
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: 1971 c10 stepside Body looks super clean. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

09-24-2011, 09:56 AM	#3
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside Well now I know that y best friend is serious about building a c10..Looking around in ebay this morning i came accross his car is on the auction block. Oh boy I hope he does not regret doing this... http://cgi.ebay.com/ebaymotors/Chevr...item415da820b2 __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-24-2011, 01:44 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: 1971 c10 stepside That is a great looking camaro... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-24-2011, 02:07 PM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 1971 c10 stepside Al I hope your right! He better hope he really wants a truck to sell that Camaro! That model isn't my first choice but his is one I would most defantenly would have. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-24-2011, 02:10 PM	#6
OJ1988 Just a car guy Join Date: Feb 2006 Location: New Washington, IN Posts: 991	Re: 1971 c10 stepside Great looking truck, and camaro! 70-73 are tops for me, my first car was a 71 camaro, that I still wish I had, of course. I would trade my truck for one in a heartbeat. __________________ 1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig

09-24-2011, 02:10 PM	#8
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside Andy my friend enjoys building things rather than showing thme or even driving them he likes the feeling of accomplishment. We speak everyday in the phone and he is now teling me that he is going to put an LS engine in the truck air ride, leather interior I told him I thought you were going to go easy in this truck so much for that. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-24-2011, 02:14 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 1971 c10 stepside From his Camaro build I can tell he will do us proud building the truck! He will like the truck even more than the camaro once he starts on it! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-24-2011, 02:21 PM	#11
OJ1988 Just a car guy Join Date: Feb 2006 Location: New Washington, IN Posts: 991	Re: 1971 c10 stepside It would take my truck and 30k for that camaro I am sure! __________________ 1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig

09-24-2011, 10:18 PM	#12
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1971 c10 stepside Can't mention his jeep and not post a picture... Glad to see we have a new relative. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-24-2011, 10:51 PM	#14
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1971 c10 stepside Now that's a Jeep.... Holy smokes! And I have to ask... superflysteiny is a dentist, what does this guy do? Haha! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-24-2011, 10:57 PM	#15
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,374	Re: 1971 c10 stepside Very solid lookin truck and some serious rides __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

09-24-2011, 11:00 PM	#18
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1971 c10 stepside He has some major skills. I'll find it hard to believe that his stepper doesn't turn out amazing since his other cars/trucks are done and done right the first time. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-24-2011, 11:01 PM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside WOW...cant wait to see his truck build __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-24-2011, 11:07 PM	#20
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside here are some picts of the jeep stock side by side with the camaro and a picture of the front finished. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild Last edited by big_al_71; 09-24-2011 at 11:12 PM.



Register or Log In To remove these advertisements.

09-25-2011, 09:55 AM	#21
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 1971 c10 stepside You would think he had enough cash if he sold that Jeep. But I don't blame him for selling the camaro either now after seeing his garage. He wants plenty of room so no one hits his truck! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-29-2011, 09:34 PM	#24
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside nice __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-29-2011, 09:44 PM	#25
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside here are a few more picts... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

Register or Log In To remove these advertisements.