![]() |
|
![]() |
#1 |
Senior Member
![]() Join Date: Oct 2017
Location: Fort Mill, SC
Posts: 203
|
Bed angle Strips
My angle strips on my '61 step were pretty gnarled up so I bought new ones but I need to know how far down from top of bed are the strips. I used this picture from another thread as reference. I need top of bed rail to top of the flange. On that note, has anyone used the polished strips and how did you mount them? It would seem welding them would ruin the polish but bolting them would make the bolts visible on the outside and nuts exposed on inside. Rivet?
Last edited by G8rN@te61; 08-31-2020 at 01:51 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2016
Location: Manlius, NY
Posts: 1,698
|
Re: Bed angle Strips
Hard to get a good picture of the tape measure, but I just went and measured my OEM strip and it is 16 1/2" from the top of the bed rail to the top of the bed angle strip that is against the bed side...and 17 3/4" from the top of the bed rail to the underside of the bed angle strip. HTH and makes sense.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Oct 2017
Location: Fort Mill, SC
Posts: 203
|
Re: Bed angle Strips
PERFECT AND THANKS!!
-Nate |
![]() |
![]() |
![]() |
Bookmarks |
|
|