armrest in the truck i have ( on a 66 c10 ) ... ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lokin4AReason · 04-10-2017, 08:35 AM

hello,

i have noticed that they have an armrest on the driver side of the truck and not the passenger side ...

was this an option or an aftermarket ... ? because i wouldnt mind finding one for the passenger side

jbgroby · 04-10-2017, 08:59 AM

Both sides were technically an option. More drivers opted for their door vs. the passenger door. THe door itself has two cage nuts where the arm rest screws into them so you are pulling on the door itself vs. the just the panel.

BTW I missed drilled mine by about a 1/2" off center, will re-drill and LUCKILY the hold will be covered by the armrest - (thank you truck Angels)

Lokin4AReason · 04-10-2017, 11:35 AM

how easy is it to find this option as in this armrest ... ?

are they available aftermarket as in a stock look ... ?

jbgroby · 04-10-2017, 11:51 AM

Quote:

Originally Posted by Lokin4AReason

how easy is it to find this option as in this armrest ... ?

are they available aftermarket as in a stock look ... ?

Yes all of the aftermarket placed sell them, if your interior is not too off the beaten path, you should be able to find a close match. I chose to use the stock interior seat cover in White/Gray - See picture of seat cover

vince1 · 04-10-2017, 11:39 AM

I drilled mine off a bit too. Don't go by the template. I would take the panel off, extend some intersecting lines through the holes to outside the panel, put the panel back on and carry the lines onto the panel.

I got the cage nuts at Fastenal. There are some pictures here not too far back on what they look like.

One of the vendors like Classic, LMC or Brothers probably sell the arm rest.

04-10-2017, 08:35 AM	#1
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 969	armrest in the truck i have ( on a 66 c10 ) ... ? hello, i have noticed that they have an armrest on the driver side of the truck and not the passenger side ... was this an option or an aftermarket ... ? because i wouldnt mind finding one for the passenger side __________________ dont want to hear excuses, i want to hear solution(s)

04-10-2017, 08:59 AM	#2
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: armrest in the truck i have ( on a 66 c10 ) ... ? Both sides were technically an option. More drivers opted for their door vs. the passenger door. THe door itself has two cage nuts where the arm rest screws into them so you are pulling on the door itself vs. the just the panel. BTW I missed drilled mine by about a 1/2" off center, will re-drill and LUCKILY the hold will be covered by the armrest - (thank you truck Angels) Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

04-10-2017, 11:35 AM	#3
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 969	Re: armrest in the truck i have ( on a 66 c10 ) ... ? how easy is it to find this option as in this armrest ... ? are they available aftermarket as in a stock look ... ? __________________ dont want to hear excuses, i want to hear solution(s)

04-10-2017, 11:39 AM	#5
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,167	Re: armrest in the truck i have ( on a 66 c10 ) ... ? I drilled mine off a bit too. Don't go by the template. I would take the panel off, extend some intersecting lines through the holes to outside the panel, put the panel back on and carry the lines onto the panel. I got the cage nuts at Fastenal. There are some pictures here not too far back on what they look like. One of the vendors like Classic, LMC or Brothers probably sell the arm rest.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.