Bucket seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Davedr · 02-19-2011, 10:20 PM

I wanted to see if anyone could identify these seats. What do they come out of? All help is appreciated.

http://i810.photobucket.com/albums/z...g?t=1298168473

http://i810.photobucket.com/albums/z...g?t=1298168496

**leddzepp** · 02-19-2011, 10:22 PM

They look like 71/72 truck buckets to me, with different covers.

Davedr · 02-20-2011, 12:20 AM

Thanks a lot. I am wanting to recover them but trying to make sure what I have.
Posted via Mobile Device

VA72C10 · 02-20-2011, 12:23 AM

Is there any way to tell the difference between the 71-72 and 73-75 once covered? I am not aware of any but wanting to verify if the frames may be different? Maybe where the bolt holes are?

**Dave** · 02-20-2011, 01:58 AM

The 73-75 seats are very close to the 71-72s. I've never encountered any appreciable difference that would not allow you to install 71-72 cover on these type. However, after 75 the low back seats change on the upper portion of the seat back.

**leddzepp** · 02-20-2011, 03:55 AM

I did not see the third pic initially. The floor mounting brackets are not 69-72 truck.

**special-K** · 02-20-2011, 09:14 AM

If those are original covers they sure survived amazingly. If they are original,I want to say the look could be Dodge. Just a guess,but I think that's the design I remember seeing.

**71blksuper4x4** · 02-20-2011, 09:32 AM

1973-1974 bucket seats out of a truck, blazer, or burb. Trevor

John H. · 02-20-2011, 12:12 PM

The 73-74 bracket mounting holes are a little different. On the front floor mounting bracket, the blazer brackets will only line up with two of the three holes on the passenger side. They will work, but not exactly the same. You could mark and weld in a nut to the factory location of the 71-72.

VA72C10 · 02-20-2011, 03:20 PM

Quote:

Originally Posted by 71blksuper4x4

1973-1974 bucket seats out of a truck, blazer, or burb. Trevor

That's what I was thinking...how did you identify them?

Davedr · 02-20-2011, 11:08 PM

Thanks for the help..Would i have problems installing them on a 70 c10? which seat brackets should i get for them? Thanks Again Dave

John H. · 02-21-2011, 02:11 AM

The drivers side should line up fine. On the truck brackets for the passenger side, I would get a repro set and mount them up. You should be able to drill the mismatched hole in the bracket and bolt it to the seat core. No one will know the difference.

02-19-2011, 10:20 PM	#1
Davedr Registered User Join Date: Sep 2010 Location: Dallas,Tx Posts: 202	Bucket seats I wanted to see if anyone could identify these seats. What do they come out of? All help is appreciated. http://i810.photobucket.com/albums/z...g?t=1298168473 http://i810.photobucket.com/albums/z...g?t=1298168496 Last edited by VA72C10; 02-20-2011 at 12:26 AM. Reason: added the pics for you

02-19-2011, 10:22 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,023	Re: Bucket seats They look like 71/72 truck buckets to me, with different covers. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

02-20-2011, 12:20 AM	#3
Davedr Registered User Join Date: Sep 2010 Location: Dallas,Tx Posts: 202	Re: Bucket seats Thanks a lot. I am wanting to recover them but trying to make sure what I have. Posted via Mobile Device

02-20-2011, 12:23 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Bucket seats Is there any way to tell the difference between the 71-72 and 73-75 once covered? I am not aware of any but wanting to verify if the frames may be different? Maybe where the bolt holes are? __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 02-20-2011 at 12:28 AM.

02-20-2011, 01:58 AM	#5
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: Bucket seats The 73-75 seats are very close to the 71-72s. I've never encountered any appreciable difference that would not allow you to install 71-72 cover on these type. However, after 75 the low back seats change on the upper portion of the seat back.

02-20-2011, 03:55 AM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,023	Re: Bucket seats I did not see the third pic initially. The floor mounting brackets are not 69-72 truck. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

02-20-2011, 09:14 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Bucket seats If those are original covers they sure survived amazingly. If they are original,I want to say the look could be Dodge. Just a guess,but I think that's the design I remember seeing. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-20-2011, 09:32 AM	#8
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: Bucket seats 1973-1974 bucket seats out of a truck, blazer, or burb. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-20-2011, 12:12 PM	#9
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Bucket seats The 73-74 bracket mounting holes are a little different. On the front floor mounting bracket, the blazer brackets will only line up with two of the three holes on the passenger side. They will work, but not exactly the same. You could mark and weld in a nut to the factory location of the 71-72.

02-20-2011, 11:08 PM	#11
Davedr Registered User Join Date: Sep 2010 Location: Dallas,Tx Posts: 202	Re: Bucket seats Thanks for the help..Would i have problems installing them on a 70 c10? which seat brackets should i get for them? Thanks Again Dave

02-21-2011, 02:11 AM	#12
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Bucket seats The drivers side should line up fine. On the truck brackets for the passenger side, I would get a repro set and mount them up. You should be able to drill the mismatched hole in the bracket and bolt it to the seat core. No one will know the difference.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.