![]() |
|
![]() |
#1 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
"The way it is" 67'swb
I have put this off long enough and decided to do a thread. I have picked the name the way it is for the reason of just that. I am planning on doing all of the work myself from start to finish and to the best of my ability. My goal is to do all of the sheet work and repair and use no filler and paint a vehicle for the first time. The way it turns out will be the way it stays. I am trying to keep this as cheap as possiblewith out paying for any labor. I know alot of you guys have done this and are very talented craftsmen. This will be a new adventure for me as I have only done suspension and engine work to my vehicles in the past. I have done several custom motorcycles and they have turned out very nice. My last one has had the same theme with everything being fabbed in my garage from start to finish and be made from scratch. the best part was I painted it and used no filler and looks great. I thought it would be cool to see if I could carry the same theme over to my truck.
I am half way thru my tuck build and will post pics as I have time. As you can see my rear section of the frame took some needed some attention BADLY! Enjoy!
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
Re: "The way it is" 67'swb
Here are some more frame pics.
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
Re: "The way it is" 67'swb
more.....
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
Re: "The way it is" 67'swb
I had fabbed up some trailing arms and they turned out nice.
Some exhaust pics. I figured I owuld do a once and done deal and used stainless, from header to tail.
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#5 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: "The way it is" 67'swb
Looking good...excellent fab work..I especially like the tranny crossmember...but the exhaust with X-pipe and the trailing arms are excellent as well!!!
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#6 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: "The way it is" 67'swb
Nice looking build...looks like you will have no trouble doing this project without help. Keep up the good work...btw, I thought you said you were doing it as cheap as possible.....that looks like some high $$$$ exhaust set-up parts.
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#7 |
Never Ending Projects
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
|
Re: "The way it is" 67'swb
Great work so far. Keep it up and post more pics when you can.
__________________
. 1965 C10 Panel, ![]() 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often... |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Sep 2008
Location: CASA GRANDE AZ
Posts: 4,276
|
Re: "The way it is" 67'swb
really nice job so far
__________________
70 SWB STEPSIDE 70 BLAZER 09 challenger |
![]() |
![]() |
![]() |
#9 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: "The way it is" 67'swb
That exhaust work is amazing!!!
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
![]() |
![]() |
![]() |
#10 |
Under Construction
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
|
Re: "The way it is" 67'swb
great work John....
__________________
Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 |
![]() |
![]() |
![]() |
#11 |
Fat Fendered Fleetside
Join Date: Nov 2004
Location: WPB, S. FL, USA, Earth
Posts: 718
|
Re: "The way it is" 67'swb
sweet build. Love the SS...
__________________
71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72 |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
Re: "The way it is" 67'swb
Here are some pics of the engine. I had found a used nvg3500 with 19,000 miles for $250. I figured that way I could use a 3.73 rear, still get descent gas mileage and have the fun of a manual.
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#13 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
![]()
Great progress!
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
Re: "The way it is" 67'swb
I have been working on getting my cab up to snuff lately. One of the concerns I had was how the nvg3500 tranny would fit and with a high hump it fits like it was from the factory!
![]() I got my floor in, all patches done a & b pillars and rockers some what fitted up. Everything looks great and I had tested the doors on both sides and am very pleased. All that I have left is the cab corners and 3 spots around the windshield that needs fixed next.
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#15 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: "The way it is" 67'swb
Keep up the good work! You definetly are heading in the right direction.
|
![]() |
![]() |
![]() |
#16 | |
Registered User
![]() Join Date: Apr 2009
Location: Belton, Texas
Posts: 32
|
Re: "The way it is" 67'swb
Quote:
|
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
Re: "The way it is" 67'swb
Thanks guys! The SS exhaust pieces I had found on ebay from tlmtube he has great prices on exhaust pieces and magnaflow mufflers.
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#18 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: "The way it is" 67'swb
Awesome fab work!
What did you paint your frame with?
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
Re: "The way it is" 67'swb
[QUOTE=72BlckButy;3490603]Awesome fab work!
What did you paint your frame with?[/QUOTE Thanks, I used the Eastwood chassis black. I used the original just for the cost, it was the cheapest of the 3 they have and it seems to work good. I have used before it and it holds up decent.
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: "The way it is" 67'swb
nice work... i'm just gonna send my cab over to your house!
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jan 2009
Location: independence mo.
Posts: 176
|
Re: "The way it is" 67'swb
Wow!!!!! That is some awosome fab!!!!!!!!
|
![]() |
![]() |
![]() |
#22 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: "The way it is" 67'swb
Nice fab work..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
Re: "The way it is" 67'swb
Thanks for the compliments guys. Things have been very busy and have not had much time the past 2 weeks to work on it. I have had several seats and other welding jobs come in which has been nice for the extra money for the truck. I am hoping or planning to try and get the cab done before winter so I can work on it this winter and still have a free bay in the garage.
Mike if I had the extra room I would tell you to bring it over. I have really been thinking about building a garage/pole barn. Just afraid to spend the money right now!
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Sep 2008
Location: WI
Posts: 1,243
|
Re: "The way it is" 67'swb
I forgot to add these pics, couple shots of rocker and 1/2 finished cab corner.
__________________
"The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200 ![]() |
![]() |
![]() |
![]() |
#25 |
Mean Buzzin' Half Dozen
Join Date: Mar 2008
Location: Orlando, Florida
Posts: 1,081
|
Re: "The way it is" 67'swb
Beautiful exhaust and cab work! I have those same wheels in your first post, it looks like they are facing different directions though in the two pictures. Haha.
__________________
"War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself."
MY TRUCK (Now for sale) 1967 C10 SWB Dylan |
![]() |
![]() |
![]() |
Bookmarks |
|
|