PA 67' swb small window cab complete part lot

[sourkraut]

I have been kicking this around for a few months now. I have decided to list this as a complete lot of parts and would rather not sale separately and try to sell all parts together first. I have broken down a list of just some of all the new parts, the major ones and have come up with a total of $9235. I know I can not get exactly what I have in them but just to break it down for me and figured I would share. The prices are what I paid and or shop prices if I had to pay for the work I did myself. I also realize that this is not a complete vehicle. I have every part to complete this truck and several new pieces and knick knacks. Other major parts scale of 1-100: tailgate-80%, hood-96%, doors-75% (lowers will need work to be perfect), glass-good, fenders-90%(no rust just some bodywork needs done), grill-75%(has filler from po).
The engine runs strong and with the exhaust sounds awesome! The truck can be moved under its own power, power steering is complete, brake system complete and literally needs just finally bodywork, installed and wired to be complete. Also all bushing, mounts are poly from Energy Susp. It also could be parted out but I am not in any rush to sell and stated previous would rather sale all and not piece mill her apart.

I am asking $8500

Moderators sorry if this is not listed in the right spot, kind of falls between two classes??
Any other pics needed or questions let me know.

cab(completely rust free new floor and all rust repaired, no bondo whatsoever) $1800
bed(new sides, header and 95%floor) $1200
wheels/tires(new 17"x8&9" WV and toyos) $1200
exhaust(all stainless from headers to tips with magnaflows) $600
engine/trans(292 cam, roller rockers, other new parts/5speed new clutch flywheel) $700
brakes(all new setup from mc, nicop lines to calibers) $200
chassis(all cleaned painted and grade 8 bolts and new metal welded in instead of riveted) $650
ECE suspension(4/6"drop, spindles, springs, shocks, sway bar, panhard bar) $760
wiring harness(painless 18ct.) $350
ECE front end rebuild kit(completely rebuild with moog parts) $525
trailing arms(newly made with 2x4x.25" square stock) $450
clutch cluster rebuilt(completely rebuilt, bushings, powder coated) $150
steering column rebuilt(all new bearings, circuitry and signals) $150
posi and new 3.73 gears(all new bearings, seals, richmond) $275
driveshaft(brand new one piece just built with all new yokes and joints) $225

total $9235

[sharpie1972]

Dang! I wish we were neighbors! Sharpie

[rich67]

thats sweeet!

[67chevy1series]

you guys he has wroked HARD TO GET EVERY RUST OUT OF THAT TRUCK HE IS MAKING A BIG MISTAKE SELLING THIS sour kaut with that being said i would be interested in some things

[messer007]

got any pics of the bed

[astevens]

That stinks you're getting rid of it. I can say its a nice truck and hes done a heck of a job on it.

[67gmcstepside]

Bed, fleet or step?

[sourkraut]

the bed is a fleet. i can get some pics of the floor and post shortly. the rest of the parts are still in the boxes but will shoot some of them as well.

[sourkraut]

here are some pics. you can see on the floor the only piece needed fixed marked in red. if front side pics needed let me know but it is near perfect with no dent and straight.

[sourkraut]

more

[angelo_32806]

do you have any more info on the engine and trans Milage intake carb and what year
and how much $ for the engine trans and hood I will have to set up a truck to pick it up for me

[Leroy-B1]

interested in lowering components and do you have any trim pieces?

[messer007]

Does the cab come with the doors
Posted via Mobile Device

[messer007]

Is the piece on the bed floor that needs fixed in the front of the bed or toward the back
Posted via Mobile Device

[sourkraut]

As stated earlier- "It also could be parted out but I am not in any rush to sell and stated previous would rather sale all and not piece mill her apart."

I will list stuff later if decide to piece out.

Bed repair is towards the front, enigne has roughly 25,000 miles and the trans is 22,000.

[Leroy-B1]

Just want to get in line on the lowering components if it comes to that hope you can sale it whole first wish I had the jack to buy it as is

[sourkraut]

Originally Posted by Leroy-B1

Just want to get in line on the lowering components if it comes to that hope you can sale it whole first wish I had the jack to buy it as is

thanks, understood. I just wanted to make sure I was not miss leading anybody.

[sourkraut]

Will try this again and as stated above not ready to part at this time. Have put the bed together(fitment not finished) and have completed the stainless steel exhaust and must say sounds awesome with direction of tips. Have lowered price to try and move $7850. Can deliver to Truck Carlisle if it sells. Added more pics to see lines and bed.

$7850

[sourkraut]

more

[1967sbss]

also the rear diff.

[1967sbss]

I understand you are not parting, but if you do i'm interested in the steering column.

[Pro Metal Shop]

(((((Sourkraut)))) Why ? What the heck ! ! ! This has to be hands down the nicest truck upside down inside out ! ! ! ! You can't replace the time you have in this truck buddy you would have to quaddroople the labor price ! ! I hope you decide to keep her

[gcburdic]

Sourkraut....since ya wanna sell this whole, would you mind starting a thread over in the Truck For Sale forum (you can just copy and paste everything from here over there)??? I appreciate it

[special-K]

Is the bed floor PINK??? I've seen it and it's nice and as you can see the bad spot laps the header panel flange....Good Luck! (bringing up to the truck show if it doesn't sell prior?

[sourkraut]

Originally Posted by Pro Metal Shop

(((((Sourkraut)))) Why ? What the heck ! ! ! This has to be hands down the nicest truck upside down inside out ! ! ! ! You can't replace the time you have in this truck buddy you would have to quaddroople the labor price ! ! I hope you decide to keep her

thank you, I know I have a lot of time into it but feel it is time to try and sell. if it does not move I will work on it this winter.

Originally Posted by gcburdic

Sourkraut....since ya wanna sell this whole, would you mind starting a thread over in the Truck For Sale forum (you can just copy and paste everything from here over there)??? I appreciate it

I will give it a shot here. sorry

Originally Posted by special-K

Is the bed floor PINK??? I've seen it and it's nice and as you can see the bad spot laps the header panel flange....Good Luck! (bringing up to the truck show if it doesn't sell prior?

it is pink!! you dont like pink?? thank you sir, looking forward to a couple cold ones and getting into trouble this year at carlilse.