WTB Big Block Clutch Pivot Bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

My72BB · 03-23-2009, 08:00 PM

After doing much research and talking to several people...I found out I need a couple more things to make my swap work...

Clutch Pivot Bracket that goes on side of Big Block for Manual Transmission. This is the piece that bolts with (2) bolts right above the oil filter and I believe it is cast iron???

I also need the bell crank for Big Block only.

I am able to fab up what I need but that is my last resort...I would like original stuff if it exist...I hope!

CE20934 · 03-23-2009, 09:01 PM

I have this one:

My72BB · 03-23-2009, 09:23 PM

Pretty sure that's it...Did it come off of a Big Block...? How much would you want for it?

PM me if you want...I'll send you pm with contac information if that will help.

Thanks, Alan

CE20934 · 03-23-2009, 10:17 PM

It's a big block pivot. I bought it to use on my engine without realizing the block didn't have the boss above the oil filter.

I don't have a big block bellcrank, no. I reworked my existing small block setup (straight-ish pushrod) instead. I don't have any pics of the mockup on-hand, but tomorrow I could take a few of the bits I did modify.

How about $15 shipped?

**BIGJAKE97** · 03-24-2009, 02:39 AM

aw man. i been looking for onw of these for months! i've seen other people post wanted adds looking for big block clutch linkage and no ever has it. i guess it's just a matter timming when the person who has one just happens to see the ad. yeah, the bracket. good deal too. -jake

My72BB · 03-24-2009, 07:35 AM

Sounds good...SOLD...PM your info and I'll get the money headed your way.

Thanks, Alan

CE20934 · 03-24-2009, 05:15 PM

PM sent.

ts71281 · 08-18-2009, 10:07 PM

What a steal, I paid $90 on ebay :*(

03-23-2009, 08:00 PM	#1
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	WTB Big Block Clutch Pivot Bracket After doing much research and talking to several people...I found out I need a couple more things to make my swap work... Clutch Pivot Bracket that goes on side of Big Block for Manual Transmission. This is the piece that bolts with (2) bolts right above the oil filter and I believe it is cast iron??? I also need the bell crank for Big Block only. I am able to fab up what I need but that is my last resort...I would like original stuff if it exist...I hope!

03-23-2009, 09:01 PM	#2
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	Re: WTB Big Block Clutch Pivot Bracket I have this one: __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed

03-23-2009, 09:23 PM	#3
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: WTB Big Block Clutch Pivot Bracket Pretty sure that's it...Did it come off of a Big Block...? How much would you want for it? PM me if you want...I'll send you pm with contac information if that will help. Thanks, Alan

03-23-2009, 10:17 PM	#4
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	Re: WTB Big Block Clutch Pivot Bracket It's a big block pivot. I bought it to use on my engine without realizing the block didn't have the boss above the oil filter. I don't have a big block bellcrank, no. I reworked my existing small block setup (straight-ish pushrod) instead. I don't have any pics of the mockup on-hand, but tomorrow I could take a few of the bits I did modify. How about $15 shipped? __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed Last edited by CE20934; 03-23-2009 at 10:43 PM. Reason: clarity

03-24-2009, 02:39 AM	#5
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: WTB Big Block Clutch Pivot Bracket aw man. i been looking for onw of these for months! i've seen other people post wanted adds looking for big block clutch linkage and no ever has it. i guess it's just a matter timming when the person who has one just happens to see the ad. yeah, the bracket. good deal too. -jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

03-24-2009, 07:35 AM	#6
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: WTB Big Block Clutch Pivot Bracket Sounds good...SOLD...PM your info and I'll get the money headed your way. Thanks, Alan

03-24-2009, 05:15 PM	#7
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	Re: WTB Big Block Clutch Pivot Bracket PM sent. __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed

08-18-2009, 10:07 PM	#8
ts71281 Registered User Join Date: Apr 2003 Location: Maple Grove, MN Posts: 497	Re: WTB Big Block Clutch Pivot Bracket What a steal, I paid $90 on ebay :*(



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.