My 86 build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TKCR** · 01-03-2015, 02:34 AM

I bought this truck in 2014. The exterior had already been done by the previous owner. The inside was clean, but I can't handle that Burgandy color in a red truck, so I've been working on some projects over the last year. So here's the dash project.

**TKCR** · 01-03-2015, 02:39 AM

After dismanteling the dash, I repainted the lower portion. The red on the ashtray & glovebox didn't match with the rest of the dash.

**TKCR** · 01-03-2015, 02:43 AM

Painted the dash pad Charcoal after removing the burgundy paint. Cleaned all the old dye off with lacquer thinner. I made a little makeshift paint tent in the garage.

**TKCR** · 01-03-2015, 02:53 AM

Installed a new radio & speakers, temp control and a clock. My truck didn't have one. So since I had an empty spot on the meter face, I added an original working clock i found on eBay. I also added led lights in the meter and more courtesy lights along with the BowTie door sills

**TKCR** · 01-03-2015, 02:58 AM

And the finished project. New Billet dash molding & emblem. New dash Bezel, I have the Billet overlay for the dash bezel, but I can't bring myself to cover the new bezel just yet.

bbbc10 · 01-03-2015, 04:44 AM

looks real good, are those the door sills from lmc?

**TKCR** · 01-03-2015, 12:11 PM

Yes the door sills are from LMC.
http://www.lmctruck.com/icatalog/cc/full.aspx?Page=73

portrodder · 01-03-2015, 11:17 PM

Looks great. What other plans do you have for it?

**TKCR** · 01-03-2015, 11:36 PM

I've already painted the doors panels and all the interior trim parts.

**TKCR** · 01-03-2015, 11:39 PM

Recovered the headliner & installed new carpet

mattcrp1 · 01-05-2015, 03:36 PM

Looking good. I like the color combo you have.

UKNOWME · 01-06-2015, 04:36 PM

You did an awesome job! What did you use for the lower dash?

**TKCR** · 09-10-2016, 09:15 PM

Quote:

Originally Posted by UKNOWME

You did an awesome job! What did you use for the lower dash?

I realized I never answered your question about the dash. I just used DupliColor Perfect Match spray paint.

**TKCR** · 09-10-2016, 10:34 PM

Seatbelt changes. When I got my seatbelts from seatbeltstore.com, I wanted my belts and the plastic housing to be charcoal and of course it needed to match my interior. A lot of the aftermarket belts out there will have the colored belts, but have the black plastic housing. So after looking at several websites and all the different variations, I found belts to match. Well there was one drawback, the belt buckles were a generic plastic push button and NOT the GM Metal Buckle. I did find some GM Decals to put on the push button.
So fast forward. I really wanted to have the Metal GM Buckle but didn't want to have to spend money on a new set of belts. So I called seatbeltstore.com and told them of my situation. They said I could get the GM Metal Buckle Lap belts, and they come in the same color that I already have. I can send my retractors back to them and they will put new tongues on so they will be able to buckle together with the new GM buckles. The tongue on my current retractors are a different size tongue and would not work with the Lap Belts. And the best part, they aren't going to charge me for this service.

**TKCR** · 09-10-2016, 10:52 PM

Some Engine Room Updates. First pic is BEFORE, the rest is AFTER

Changed out my carburetor with a new Edelbrock 600. New headers, air cleaner, valve covers, plugs & Red wires. All with the Chevrolet nameplate.

slotard · 01-06-2015, 04:42 PM

Why do you want a new column? Yours appears to be in decent shape, and is tilt.

Keith Seymore · 01-06-2015, 04:47 PM

Quote:

Originally Posted by TKCR

The inside was clean, but I can't handle that Burgandy color in a red truck,

LOL!

That's exactly the same thing the women at my house said. Looked fine to me...

Anyway, in deference to their opinion(s) I changed over to a black interior when I went back together. You can see the results in my build/intro thread below if you are interested.

Having given it further thought - it's even funnier since the red/burgandy '87 was a direct result of their complaints about my red/tan '86 Suburban. They called it the "Rotten Tomato".

I can't win...

K

**GAc10boy** · 05-18-2016, 01:51 PM

Great looking truck! Really like the interior updates.

**TKCR** · 05-18-2016, 03:08 PM

Quote:

Originally Posted by GAc10boy

Great looking truck! Really like the interior updates.

Thanks Robbie

SKT · 07-01-2016, 06:28 PM

Quote:

Originally Posted by gac10boy

great looking truck! Really like the interior updates.

.
.

X2!

.
.

**TKCR** · 07-01-2016, 08:15 PM

Thanks!!

made2drag · 07-11-2016, 03:58 PM

very nice

**TKCR** · 08-14-2016, 10:12 AM

Did some changes on the interior again. Got some new door panels from LMC and new armrests. I like the light gray better than the darker that I had. Here's the before & after on the door panels.

**TKCR** · 08-14-2016, 10:25 AM

One of the things I really disliked about my truck ever since I bought it 3yrs. ago, is the aftermarket hood with the cowl induction scoop. To me it just doesn't look right. So I happened across a NOS hood. So that will be the next changes to come, is to get my new hood painted and find a Hood Ornament.

RUN GMC · 08-14-2016, 11:13 AM

Very nice truck you got there......I wanted to know did add leds under the dash....on mine I have just one place to install led bulb under the dash like how well lighted yours is in that area.......again nice truck.....

01-03-2015, 02:34 AM	#1
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	My 86 build I bought this truck in 2014. The exterior had already been done by the previous owner. The inside was clean, but I can't handle that Burgandy color in a red truck, so I've been working on some projects over the last year. So here's the dash project. Attached Images Last edited by TKCR; 05-16-2019 at 08:48 AM.

01-03-2015, 02:39 AM	#2
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: 86 Dash Project After dismanteling the dash, I repainted the lower portion. The red on the ashtray & glovebox didn't match with the rest of the dash. Attached Images

01-03-2015, 02:43 AM	#3
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: 86 Dash Project Painted the dash pad Charcoal after removing the burgundy paint. Cleaned all the old dye off with lacquer thinner. I made a little makeshift paint tent in the garage. Attached Images Last edited by TKCR; 12-04-2019 at 06:54 PM.

01-03-2015, 02:53 AM	#4
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: 86 Dash Project Installed a new radio & speakers, temp control and a clock. My truck didn't have one. So since I had an empty spot on the meter face, I added an original working clock i found on eBay. I also added led lights in the meter and more courtesy lights along with the BowTie door sills Attached Images Last edited by TKCR; 12-04-2019 at 06:55 PM.

01-03-2015, 02:58 AM	#5
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: 86 Dash Project And the finished project. New Billet dash molding & emblem. New dash Bezel, I have the Billet overlay for the dash bezel, but I can't bring myself to cover the new bezel just yet. Attached Images

01-03-2015, 04:44 AM	#6
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: 86 Dash Project looks real good, are those the door sills from lmc?

01-03-2015, 12:11 PM	#7
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: 86 Dash Project Yes the door sills are from LMC. http://www.lmctruck.com/icatalog/cc/full.aspx?Page=73

01-03-2015, 11:17 PM	#8
portrodder Registered User Join Date: Mar 2014 Location: West Monroe, Louisiana Posts: 79	Re: 86 Dash Project Looks great. What other plans do you have for it?

01-03-2015, 11:36 PM	#9
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: 86 Dash Project I've already painted the doors panels and all the interior trim parts. Attached Images

01-03-2015, 11:39 PM	#10
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: 86 Dash Project Recovered the headliner & installed new carpet Attached Images

01-05-2015, 03:36 PM	#11
mattcrp1 Registered User Join Date: May 2010 Location: Mountain House, CA Posts: 555	Re: 86 Dash Project Looking good. I like the color combo you have. __________________ My Chevy habit is paid for by Ford diesels... Here is my SLOW LS install: http://67-72chevytrucks.com/vboard/s...55#post6456355 Caliper Rebuild: http://67-72chevytrucks.com/vboard/s...d.php?t=613748 Upper Control Arm Bushings: http://67-72chevytrucks.com/vboard/s...d.php?t=616974 IG mattcrp1

01-06-2015, 04:36 PM	#12
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 86 Dash Project You did an awesome job! What did you use for the lower dash? __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

09-10-2016, 10:34 PM	#14
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: My 86 build Seatbelt changes. When I got my seatbelts from seatbeltstore.com, I wanted my belts and the plastic housing to be charcoal and of course it needed to match my interior. A lot of the aftermarket belts out there will have the colored belts, but have the black plastic housing. So after looking at several websites and all the different variations, I found belts to match. Well there was one drawback, the belt buckles were a generic plastic push button and NOT the GM Metal Buckle. I did find some GM Decals to put on the push button. So fast forward. I really wanted to have the Metal GM Buckle but didn't want to have to spend money on a new set of belts. So I called seatbeltstore.com and told them of my situation. They said I could get the GM Metal Buckle Lap belts, and they come in the same color that I already have. I can send my retractors back to them and they will put new tongues on so they will be able to buckle together with the new GM buckles. The tongue on my current retractors are a different size tongue and would not work with the Lap Belts. And the best part, they aren't going to charge me for this service. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

09-10-2016, 10:52 PM	#15
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: My 86 build Some Engine Room Updates. First pic is BEFORE, the rest is AFTER Changed out my carburetor with a new Edelbrock 600. New headers, air cleaner, valve covers, plugs & Red wires. All with the Chevrolet nameplate. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR Last edited by TKCR; 09-10-2016 at 10:58 PM.

01-06-2015, 04:42 PM	#16
slotard Registered User Join Date: Nov 2014 Location: Alameda, CA Posts: 877	Re: 86 Dash Project Why do you want a new column? Yours appears to be in decent shape, and is tilt. __________________ 1973 C20, 350/350



Register or Log In To remove these advertisements.

05-18-2016, 01:51 PM	#18
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: My 86 build Great looking truck! Really like the interior updates. __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

07-01-2016, 08:15 PM	#21
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: My 86 build Thanks!!

07-11-2016, 03:58 PM	#22
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: My 86 build very nice __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

08-14-2016, 10:12 AM	#23
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: My 86 build Did some changes on the interior again. Got some new door panels from LMC and new armrests. I like the light gray better than the darker that I had. Here's the before & after on the door panels. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

08-14-2016, 10:25 AM	#24
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: My 86 build One of the things I really disliked about my truck ever since I bought it 3yrs. ago, is the aftermarket hood with the cowl induction scoop. To me it just doesn't look right. So I happened across a NOS hood. So that will be the next changes to come, is to get my new hood painted and find a Hood Ornament. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

08-14-2016, 11:13 AM	#25
RUN GMC Registered User Join Date: May 2014 Location: North AL Posts: 363	Re: My 86 build Very nice truck you got there......I wanted to know did add leds under the dash....on mine I have just one place to install led bulb under the dash like how well lighted yours is in that area.......again nice truck..... __________________ http://i204.photobucket.com/albums/b...baae5d9a7e.jpg

Register or Log In To remove these advertisements.