![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
![]() Join Date: May 2017
Location: Okemah Ok.
Posts: 218
|
Help me! 1967 c20 lower bearing install
I need help,I have looked through all the threads I can find and can't find anything about lower column bearing replacement.plenty out there about 69 and later.I ordered new bearings and top one fits fine this column is a 1967 c 20 column standard shift ,manual trans. I have the lower bearing hub in my hand but don't see how old bearing race comes out. I have read both bearings are the same but don't know .Thanks RW
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2013
Location: LI, NY 11801
Posts: 1,140
|
Re: Help me! 1967 c20 lower bearing install
Stand by, someone with knowledge will chime in on this.
__________________
1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks! |
![]() |
![]() |
![]() |
#3 |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,431
|
Re: Help me! 1967 c20 lower bearing install
I've never done this, but from the looks of it, you punch the race out from the far side (as shown in this picture), and then press the new bearing in.
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: May 2017
Location: Okemah Ok.
Posts: 218
|
Re: Help me! 1967 c20 lower bearing install
The old bearing race did press out as you said,now the new bearing doesn't feel like it's going to be small enough to press in hub without distorting it. Thanks RW.
|
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: May 2017
Location: Okemah Ok.
Posts: 218
|
Re: Help me! 1967 c20 lower bearing install
Nevermind found out the upper bearing and lower are not the same,have to order new lower bearing.Thanks RW
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2015
Location: Phoenix Az
Posts: 211
|
Re: Help me! 1967 c20 lower bearing install
I was going to ask if you could buy a complete replacement
__________________
Brian Ritter |
![]() |
![]() |
![]() |
Bookmarks |
|
|