Late model wheels on my 69 c-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pont406 · 03-27-2008, 06:40 AM

My coworker bought some bling bling wheels for his late model chevy. Old wheels and tires have 2000 miles on them. He wants $300 for a set. I am sure that he will take $250. I took one wheel home to see if I will like it or not. Bolt pattern is fine but the hub is too big. Also, rear wheel will not clear. I can probablly get some wheel adapters but that will add $100 or so. What do you guys think should I pass or buy them? Thanks

ed2552 · 03-27-2008, 06:44 AM

I say pass, the wheels you have are probably better looking than those

Sequoyah · 03-27-2008, 07:00 AM

Fixed

Quote:

Originally Posted by ed2552

I say pass, the wheels you have are better looking than those

drivethechevy · 03-27-2008, 07:12 AM

i agree on passing those rims add a flimsy look to your truck

Cyclone44 · 03-27-2008, 07:53 AM

Quote:

Originally Posted by drivethechevy

i agree on passing those rims add a flimsy look to your truck

I wouldn't put those on mine...

HoupPhotography · 03-27-2008, 08:05 AM

Yeah what he said....

Seriously, they look odd, I would pass. But it's your truck, what do YOU think?

1LoC10 · 03-27-2008, 07:03 AM

if they dont fit then pass... i wouldnt spend more money to make them fit

Longhorn Man · 03-27-2008, 07:04 AM

if you have rims to put the tires on, then go for it.
Personally, even with spacers to 'fix' the hub hole and back spacing issue, I'd personally still think they look like crap on a classic.

ed2552 · 03-27-2008, 07:05 AM

Quote:

Originally Posted by Longhorn Man

if you have rims to put the tires on, then go for it. Personally, even with spacers to 'fix' the hub hole and back spacing issue, I'd personally still think they look like crap on a classic.

Agree 100%, the tires are worth at least that, it is a good deal, just don't use the rims, sell them to a dealer or a body shop. When a car gets hit in the right spot, it bends the rim and it is shot, and if they buy them from you for, say $50 apiece, that is cheaper than getting them from a GM dealer for 100 or more, or they could use them to put on trucks about to get painted, and they wouldn't have to worry about overspray

killer71 · 03-27-2008, 07:04 AM

there not bad imo!

shifty · 03-27-2008, 07:15 AM

i'd say pass if you're thinking about buying them to put on your truck. you can get four nice wheels for $65 each from Summit like these:

http://store.summitracing.com/partde...5&autoview=sku

Pont406 · 03-27-2008, 08:37 AM

They look better with a center cap and lugnut covers. If it was a bolt on deal I would keep them.

70GMCer · 03-27-2008, 02:59 PM

pass for sure.....

03-27-2008, 06:40 AM	#1
Pont406 Registered User Join Date: Aug 2007 Location: West Hills, California Posts: 679	Late model wheels on my 69 c-10 My coworker bought some bling bling wheels for his late model chevy. Old wheels and tires have 2000 miles on them. He wants $300 for a set. I am sure that he will take $250. I took one wheel home to see if I will like it or not. Bolt pattern is fine but the hub is too big. Also, rear wheel will not clear. I can probablly get some wheel adapters but that will add $100 or so. What do you guys think should I pass or buy them? Thanks Attached Images

03-27-2008, 06:44 AM	#2
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: Late model wheels on my 69 c-10 I say pass, the wheels you have are probably better looking than those __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A

03-27-2008, 07:12 AM	#4
drivethechevy Registered User Join Date: May 2007 Location: Buffalo MN Posts: 606	Re: Late model wheels on my 69 c-10 i agree on passing those rims add a flimsy look to your truck __________________ Trial and Error, its expensive but its a mistake i most likely wont make again 1971 chevy k10 custom deluxe http://67-72chevytrucks.com/vboard/s...d.php?t=341257 1968 chevy k/10 fleet http://67-72chevytrucks.com/vboard/s...d.php?t=334731 1948 desoto custom coupe fluid drive(family heirloom)

03-27-2008, 08:05 AM	#6
HoupPhotography Registered User Join Date: Feb 2008 Location: Phoenix, Az Posts: 1,204	Re: Late model wheels on my 69 c-10 Yeah what he said.... Seriously, they look odd, I would pass. But it's your truck, what do YOU think?

03-27-2008, 07:03 AM	#7
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Late model wheels on my 69 c-10 if they dont fit then pass... i wouldnt spend more money to make them fit __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << Last edited by 1LoC10; 03-27-2008 at 07:03 AM.

03-27-2008, 07:04 AM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Late model wheels on my 69 c-10 if you have rims to put the tires on, then go for it. Personally, even with spacers to 'fix' the hub hole and back spacing issue, I'd personally still think they look like crap on a classic.

03-27-2008, 07:04 AM	#10
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Late model wheels on my 69 c-10 there not bad imo! __________________ R.I.P. Killer 71 10/26/07

03-27-2008, 07:15 AM	#11
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: Late model wheels on my 69 c-10 i'd say pass if you're thinking about buying them to put on your truck. you can get four nice wheels for $65 each from Summit like these: http://store.summitracing.com/partde...5&autoview=sku __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-27-2008, 08:37 AM	#12
Pont406 Registered User Join Date: Aug 2007 Location: West Hills, California Posts: 679	Re: Late model wheels on my 69 c-10 They look better with a center cap and lugnut covers. If it was a bolt on deal I would keep them.

03-27-2008, 02:59 PM	#13
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Late model wheels on my 69 c-10 pass for sure..... __________________ 1997 GMC Sierra Ext 1965 Mustang



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.