![]() |
|
![]() |
#1 |
Registered User
Join Date: May 2016
Location: Geneva, NY
Posts: 61
|
Power steering hoses?
Hey guys,
I just bought an 86 c20, and I'm looking at rockauto to order a new power steering hose. Does anyone know why there are two designs? I see one says 1st design and one says 2nd design, it looks like the second design has more of a loop at the end but I'm not sure which one I need. I can go look tomorrow but I was curious if someone had insight as to why/when this went into effect?
__________________
1997 ECSB K1500: 350; NV4500; 3.42's; 14 Bolt SF; 0411 ECM; 3/4-ton Calipers; Hydroboost; 3500HD Door Handles; 32x11.50x15 Cooper STT's on OOBS Rallys Plans: 4.10s, 33's, 4" Lift, Urethane Bushing Kit |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2013
Location: ATLANTA
Posts: 223
|
Re: Power steering hoses?
Hello. I just replaced the hoses on my 1975 this morning. I would offer an alternative purchase location of Autozone only because you can order both types to the store and take yours in for comparison or at least have an easy return if necessary. Autozone offers AC Delco and a few other manufacturers brands. I know this doesn't answer your question directly but hope it helps.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2015
Location: Alberta
Posts: 464
|
Re: Power steering hoses?
One might be metric with the O-ring seal and the other the flare fitting? I can't remember when the switchover was Maybe I'm wrong
__________________
-Cody |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2016
Location: Geneva, NY
Posts: 61
|
Re: Power steering hoses?
Oh there's a possibility, I hadn't thought of that. I was more curious than anything.
Usually I order online because I can get a deal but I have found you always have to shop around. This hose in particular is only $0.50 more at Advance so that's no big deal. I ordered wheel seals this morning because I got SKF seals for $3 and at advance their cheap ones are 4.99 and their good ones are 8.99. Plus I ordered the brake hardware I need so I didn't get screwed with shipping.
__________________
1997 ECSB K1500: 350; NV4500; 3.42's; 14 Bolt SF; 0411 ECM; 3/4-ton Calipers; Hydroboost; 3500HD Door Handles; 32x11.50x15 Cooper STT's on OOBS Rallys Plans: 4.10s, 33's, 4" Lift, Urethane Bushing Kit |
![]() |
![]() |
![]() |
#5 | |
Senior Member
![]() Join Date: Jul 2000
Location: North Texas
Posts: 3,488
|
Re: Power steering hoses?
Quote:
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2016
Location: Geneva, NY
Posts: 61
|
Re: Power steering hoses?
I usually do too. It depends on how certain I am that I have the right one and price. If there's any question it's very nice to be able to just zip over and swap it out!
__________________
1997 ECSB K1500: 350; NV4500; 3.42's; 14 Bolt SF; 0411 ECM; 3/4-ton Calipers; Hydroboost; 3500HD Door Handles; 32x11.50x15 Cooper STT's on OOBS Rallys Plans: 4.10s, 33's, 4" Lift, Urethane Bushing Kit |
![]() |
![]() |
![]() |
Bookmarks |
|
|