TX 1969-72 NOS Woodgrain trim set - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jsd454 · 11-03-2010, 12:36 AM

Complete set of NOS woodgrain side mouldings for a long bed truck. All are sealed in the package with hardware.

$700 shipped in the lower 48.

Also NOS woodgrain tailgate band $250 SOLDshipped in the lower 48. No pics, but I'll add some soon. It is NOT in the wrapper, but NOS and perfect.

Thanks!

newbraunie · 11-03-2010, 12:41 AM

Interested in NOS tailgate band pending pics.

newbraunie · 11-03-2010, 10:31 PM

Quote:

Originally Posted by newbraunie

Interested in NOS tailgate band pending pics.

Hold my place in line til tomorrow pm. I need to check this piece against what I hve on hand. I will reply in thread to either take or let next in line take.

**too much stuff** · 11-03-2010, 11:03 PM

If you have any extra woodgrain 3997440 i would be interested. That is the same one as hotfun is interested in. What other pieces do you have? Thanks, Eric

jsd454 · 11-04-2010, 12:08 AM

Eric,

I will see what else I have. I know I have multiples of most all cab pieces and some long bed pieces. There is more wood grain that I haven't sorted yet, and lots of the narrow trim too.

I'll post all trim pieces in this thread.

Jeff

**68350** · 11-03-2010, 12:55 AM

I'm definitely in line for the tailgate band, I need one to complete my trim set.

**68350** · 11-03-2010, 07:37 PM

bttt

jsd454 · 11-03-2010, 09:51 PM

Tailgate band pics:

Has plastic letters with a little bit of wear. This is the worst one:

Also, I may have the shortbed wood grain trim pieces. I found one short bed piece for the rt side in front of the rr wheel. Haven't found the left yet. Will someone tell me if the trim behind the rear wheel is the same on short and long?

Thanks!

HOTFUN · 11-03-2010, 10:10 PM

Rear pieces are also shorter but I would be interested in that pass side front woodgrain piece. Thanks, mark

jsd454 · 11-03-2010, 10:13 PM

Mark,

I have multiples of many pieces in varying condition NOS (sealed, open w/ hardware, no packaging or hardware). What else do you need?

Do you know the part numbers for the short bed pieces?

Thanks!
Jeff

HOTFUN · 11-03-2010, 10:29 PM

I think I just needed that pass side front bed piece but I am working tonight til 06:00 so my books are at home. I can look them up for you in the morning if someone doesn't pipe in with them. Otherwise I'll take the NOS 73-76 chevy bowtie wheelcover set for $200 and if you want to price the moulding in a pm. Thanks, Mark

HOTFUN · 11-04-2010, 01:56 AM

Jeff I am needing the left and right narrow upper cab side trim pieces between door and box too. Thanks, Mark

longhorn396 · 11-04-2010, 09:05 AM

GOD i would love to have those on my truck!!!!

jsd454 · 11-04-2010, 09:26 AM

The lower woodgrain set is still available.

longhorn396 · 11-04-2010, 09:27 AM

i dont have any money

jsd454 · 11-04-2010, 09:46 AM

I know that feeling!

I have a question for you guys. I have several pieces that appear the same, but have different part numbers on them.

Example -
3955302 appears to be right front bed moulding loose and hand written part number
3997444 right front bed moulding in sealed package w/ GM number stamped on it

Which one is correct? Are the both correct but one was superceded? Are they different pieces that look the same?

BB72CHEVKT · 11-04-2010, 11:46 AM

Looking for swb pieces.

70LonghornCST · 11-05-2010, 12:57 AM

Quote:

Originally Posted by jsd454

I know that feeling!

I have a question for you guys. I have several pieces that appear the same, but have different part numbers on them.

Example -
3955302 appears to be right front bed moulding loose and hand written part number
3997444 right front bed moulding in sealed package w/ GM number stamped on it

Which one is correct? Are the both correct but one was superceded? Are they different pieces that look the same?

Yes, I believe 3997444 superceds the other. You might want to use this link for future part references. It is a great database for GM parts.

jsd454 · 11-05-2010, 08:53 AM

Newbraunie- I somehow missed your post regarding the plastic letters. I don't know the answer to your question. All I know is that I have only found NOS and used OEM parts in this collection, no reproduction parts whatsoever. I also know this collection of parts has not been touched in nearly 20yrs. The tailgate band matches side by side with the NOS woodgrain trim.

70LonghornCST- thank you very much for your assistance. I will give that site a shot!

Thanks,
Jeff

newbraunie · 11-05-2010, 02:02 PM

Quote:

Originally Posted by jsd454

Newbraunie- I somehow missed your post regarding the plastic letters. I don't know the answer to your question. All I know is that I have only found NOS and used OEM parts in this collection, no reproduction parts whatsoever. I also know this collection of parts has not been touched in nearly 20yrs. The tailgate band matches side by side with the NOS woodgrain trim.

70LonghornCST- thank you very much for your assistance. I will give that site a shot!

Thanks,
Jeff

Jeff, I will take the tailgate band. I will contact you to arrange payment and pickup. Thanks, Chris

HOTFUN · 11-04-2010, 02:53 PM

Jeff My GM book is printed in sept 1972 and I also have the last print in 79 and I can not see that hand written # 3955302. The CST Blazer used #3997457 for the RH frt wdg and of course the different wb all were different. That 3997440 is the correct one for the RH frt box piece on the 115" wb. I would like to buy that one to complete my 71. If that other moulding laid out is the same length point to point it would be the same moulding of course for the RH side also. I also would like the two short upper top pieces of side trim # 3953885 and 3953886 if yo have those. If you need any help with part numbers shoot me a list and I'll check them out. Let me know on the mouldings with that wheel cover set and I'll get you paid. Thanks, Mark

The 3997444 is a long box RH front 127" wheelbase.

**jwb-tn** · 11-04-2010, 10:26 PM

Jeff, When you have time to look thru your moldings I'm also in need of a nos molding in package part# 3997460 3rd dr suburban and part# 3952464 3rd dr to rear wheel. Thanks for looking Jeff

newbraunie · 11-04-2010, 10:49 PM

Jeff, you mention that the tailgate band has plastic letters? I checked the original one currently on my truck and it has metal letters. I do not have much experience with these but it seems it should have metal letters like OEM.

Anyone have any info on the letters on these tailgate bands?

Here are the lower woodgrain mouldings for LWB w/toolbox that I am looking for:
part #3977352 Rear of box
part #3977590 Box door
part #3977510 Front of box

70LonghornCST · 11-05-2010, 12:51 AM

Quote:

Originally Posted by newbraunie

Jeff, you mention that the tailgate band has plastic letters? I checked the original one currently on my truck and it has metal letters. I do not have much experience with these but it seems it should have metal letters like OEM.

Anyone have any info on the letters on these tailgate bands?

Here are the lower woodgrain mouldings for LWB w/toolbox that I am looking for:
part #3977352 Rear of box
part #3977590 Box door
part #3977510 Front of box

I may be mistaken, but from what I have gathered, GM made some of their OEM replacement stock (and maybe all stock after a certain year?) using the plastic letter alternative. Moreover, I also know that there are two versions of the plastic replacement letters. One is chromed plastic letters, while the other is a silver-painted plastic letters. I have one in the GM package (not for sale) that has silver-painted plastic letters. I hope this helps some.

jsd454 · 11-05-2010, 12:09 AM

I made a mistake about the complete set. The left front bed piece is not in a package, but I do have hardware.

I have counted and identified all of the wood grain mouldings that I have.

All are posted here:
https://spreadsheets.google.com/pub?...=1&output=html

It has become difficult to keep track of the many threads and PMs. Please email me at jsd4548@hotmail.com with any orders or questions.

Thanks!
Jeff

11-03-2010, 12:36 AM	#1
jsd454 Registered User Join Date: Oct 2008 Location: Austin, TX Posts: 77	1969-72 NOS Woodgrain trim set Complete set of NOS woodgrain side mouldings for a long bed truck. All are sealed in the package with hardware. $700 shipped in the lower 48. Also NOS woodgrain tailgate band $250 SOLDshipped in the lower 48. No pics, but I'll add some soon. It is NOT in the wrapper, but NOS and perfect. Thanks! Last edited by jsd454; 11-14-2010 at 07:35 PM.

11-03-2010, 12:41 AM	#2
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: 1969-72 NOS Woodgrain trim set Interested in NOS tailgate band pending pics. __________________ 1971 C20 LWB Cheyenne 396/TH400 2017 Chevy SS - Holden conversion 2015 Chevy SS 2013 Acura MDX

11-03-2010, 11:03 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: 1969-72 NOS Woodgrain trim set If you have any extra woodgrain 3997440 i would be interested. That is the same one as hotfun is interested in. What other pieces do you have? Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-04-2010, 12:08 AM	#5
jsd454 Registered User Join Date: Oct 2008 Location: Austin, TX Posts: 77	Re: 1969-72 NOS Woodgrain trim set Eric, I will see what else I have. I know I have multiples of most all cab pieces and some long bed pieces. There is more wood grain that I haven't sorted yet, and lots of the narrow trim too. I'll post all trim pieces in this thread. Jeff

11-03-2010, 12:55 AM	#6
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1969-72 NOS Woodgrain trim set I'm definitely in line for the tailgate band, I need one to complete my trim set. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-03-2010, 07:37 PM	#7
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1969-72 NOS Woodgrain trim set bttt __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-03-2010, 09:51 PM	#8
jsd454 Registered User Join Date: Oct 2008 Location: Austin, TX Posts: 77	Re: 1969-72 NOS Woodgrain trim set Tailgate band pics: Has plastic letters with a little bit of wear. This is the worst one: Also, I may have the shortbed wood grain trim pieces. I found one short bed piece for the rt side in front of the rr wheel. Haven't found the left yet. Will someone tell me if the trim behind the rear wheel is the same on short and long? Thanks!

11-03-2010, 10:10 PM	#9
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: 1969-72 NOS Woodgrain trim set Rear pieces are also shorter but I would be interested in that pass side front woodgrain piece. Thanks, mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" Last edited by HOTFUN; 11-03-2010 at 10:12 PM.

11-03-2010, 10:13 PM	#10
jsd454 Registered User Join Date: Oct 2008 Location: Austin, TX Posts: 77	Re: 1969-72 NOS Woodgrain trim set Mark, I have multiples of many pieces in varying condition NOS (sealed, open w/ hardware, no packaging or hardware). What else do you need? Do you know the part numbers for the short bed pieces? Thanks! Jeff

11-03-2010, 10:29 PM	#11
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: 1969-72 NOS Woodgrain trim set I think I just needed that pass side front bed piece but I am working tonight til 06:00 so my books are at home. I can look them up for you in the morning if someone doesn't pipe in with them. Otherwise I'll take the NOS 73-76 chevy bowtie wheelcover set for $200 and if you want to price the moulding in a pm. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

11-04-2010, 01:56 AM	#12
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: 1969-72 NOS Woodgrain trim set Jeff I am needing the left and right narrow upper cab side trim pieces between door and box too. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

11-04-2010, 09:05 AM	#13
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: 1969-72 NOS Woodgrain trim set GOD i would love to have those on my truck!!!! __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc

11-04-2010, 09:26 AM	#14
jsd454 Registered User Join Date: Oct 2008 Location: Austin, TX Posts: 77	Re: 1969-72 NOS Woodgrain trim set The lower woodgrain set is still available.

11-04-2010, 09:27 AM	#15
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: 1969-72 NOS Woodgrain trim set i dont have any money __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc

11-04-2010, 09:46 AM	#16
jsd454 Registered User Join Date: Oct 2008 Location: Austin, TX Posts: 77	Re: 1969-72 NOS Woodgrain trim set I know that feeling! I have a question for you guys. I have several pieces that appear the same, but have different part numbers on them. Example - 3955302 appears to be right front bed moulding loose and hand written part number 3997444 right front bed moulding in sealed package w/ GM number stamped on it Which one is correct? Are the both correct but one was superceded? Are they different pieces that look the same?



Register or Log In To remove these advertisements.

11-04-2010, 11:46 AM	#17
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: 1969-72 NOS Woodgrain trim set Looking for swb pieces. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

11-05-2010, 08:53 AM	#19
jsd454 Registered User Join Date: Oct 2008 Location: Austin, TX Posts: 77	Re: 1969-72 NOS Woodgrain trim set Newbraunie- I somehow missed your post regarding the plastic letters. I don't know the answer to your question. All I know is that I have only found NOS and used OEM parts in this collection, no reproduction parts whatsoever. I also know this collection of parts has not been touched in nearly 20yrs. The tailgate band matches side by side with the NOS woodgrain trim. 70LonghornCST- thank you very much for your assistance. I will give that site a shot! Thanks, Jeff

11-04-2010, 02:53 PM	#21
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: 1969-72 NOS Woodgrain trim set Jeff My GM book is printed in sept 1972 and I also have the last print in 79 and I can not see that hand written # 3955302. The CST Blazer used #3997457 for the RH frt wdg and of course the different wb all were different. That 3997440 is the correct one for the RH frt box piece on the 115" wb. I would like to buy that one to complete my 71. If that other moulding laid out is the same length point to point it would be the same moulding of course for the RH side also. I also would like the two short upper top pieces of side trim # 3953885 and 3953886 if yo have those. If you need any help with part numbers shoot me a list and I'll check them out. Let me know on the mouldings with that wheel cover set and I'll get you paid. Thanks, Mark The 3997444 is a long box RH front 127" wheelbase. __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" Last edited by HOTFUN; 11-05-2010 at 01:18 AM. Reason: misread #

11-04-2010, 10:26 PM	#22
jwb-tn Junior Member Join Date: Mar 2009 Location: Franklin, Tennessee Posts: 86	Re: 1969-72 NOS Woodgrain trim set Jeff, When you have time to look thru your moldings I'm also in need of a nos molding in package part# 3997460 3rd dr suburban and part# 3952464 3rd dr to rear wheel. Thanks for looking Jeff

11-04-2010, 10:49 PM	#23
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: 1969-72 NOS Woodgrain trim set Jeff, you mention that the tailgate band has plastic letters? I checked the original one currently on my truck and it has metal letters. I do not have much experience with these but it seems it should have metal letters like OEM. Anyone have any info on the letters on these tailgate bands? Here are the lower woodgrain mouldings for LWB w/toolbox that I am looking for: part #3977352 Rear of box part #3977590 Box door part #3977510 Front of box __________________ 1971 C20 LWB Cheyenne 396/TH400 2017 Chevy SS - Holden conversion 2015 Chevy SS 2013 Acura MDX

11-05-2010, 12:09 AM	#25
jsd454 Registered User Join Date: Oct 2008 Location: Austin, TX Posts: 77	Re: 1969-72 NOS Woodgrain trim set I made a mistake about the complete set. The left front bed piece is not in a package, but I do have hardware. I have counted and identified all of the wood grain mouldings that I have. All are posted here: https://spreadsheets.google.com/pub?...=1&output=html It has become difficult to keep track of the many threads and PMs. Please email me at jsd4548@hotmail.com with any orders or questions. Thanks! Jeff Last edited by jsd454; 11-05-2010 at 12:33 AM.

Register or Log In To remove these advertisements.